Data Sheet
Danfoss Ally™ Starter Pack
Containing Gateway & Radiator Thermostat
Application
Ordering
• The Danfoss Ally™ Gateway software is automatically updated from the internet.
The total number of units for the one Danfoss Ally™
Gateway must not exceed 128 mains and 32 battery
powered devices:
The Danfoss Ally™ Gateway is a programmable,
wireless control system that connects all the
Danfoss Ally™ devices to the internet and intelligently controls your heating via a free app downloadable from Google Play and App Store.
The power supply and LAN cable for the internet
connection are included.
• Controls the daily heating schedule for every room
allowing quick and easy adjustments to be made.
• The Pre-Heat function is used to ensure you have
the right temperature when you want it. When PreHeat function is “On” it means that, it is ramping up
to the next scheduled At Home mode.
Product Languages Code no.
Danfoss Ally™ Starter Pack EN, DE, DA, FR, IT, PL, CS, UA, RU, ET, LV, HR,
IS, SK, SL, TR
Danfoss Ally™ Radiator Thermostat 32 units
Danfoss Ally™ Room Sensor 32 units
Danfoss Ally™ Zigbee Repeater 128 units
Danfoss Icon™ Zigbee Module 20 units
Danfoss Icon™ Master Controller
(floor Heating)
Danfoss Icon™ Room Thermostat 128 units
Devices per room 128 units
Devices per one gateway 128 units
Rooms per one gateway Unlimited
Homes/Families Unlimited
20 units
014G2440
Easy Installation
© Danfoss | FEC | 2021.12
AI340554761877en-020203 | 1
Data Sheet Danfoss Ally™ Starter Pack
Technical Specifications
Danfoss Ally™ Gateway
Device Function Smart Home Gateway
Recommended Use Residential indoor (pollution degree 2)
Application Radiators, water-based floor heating
LED Indicators (green) Power/Status, Network Connection
Button
Power Supply 5 VDC
Adaptor 110 V ~ 240 VAC, 5V 1A DC
Power Consumption / Standby < 5 W / < 2 W
Wired Communication 10/100M Ethernet Port (RJ45, LAN)
Wireless Communication Zigbee / IEEE 802.15.4
Transmission Frequency / Power 2.4 GHz / < 20 dBm (79 mW)
Transmission range inside buildings up to 30 m
Firmware Update Support for over the air updates
Operation Temperature -10 °C to 55 °C
Storage Temperature -20 °C to 60 °C
Size 95 mm x 95 mm x 23 mm
IP class 20
Integrations Amazon Alexa, Google Assistant, Partner API
Approval, markings etc.
Press Reset Button for 5 sec. to perform factory
reset
2 | © Danfoss | FEC | 2021.12
AI340554761877en-020203
Data Sheet Danfoss Ally™ Starter Pack
Danfoss Ally™ Radiator Thermostat
Thermostat type Programmable electronic radiator valve controller
Recommended use Residential (pollution degree 2)
Actuator Electromechanical
Display LCD with white backlight
Software classification A
Control PID
Power supply 2 x 1.5 V alkaline AA batteries
Power consumption 3 mW in standby, 1.2 W when active
Trasmission Frequency / Power 2,4 GHz / < 40 mW
Battery life Up to 2 years
Low battery signal Battery icon will flash in display.
Ambient temperature range 0 to 40 °C
Transportation temperature range -20 to 65 °C
Maximum water temperature 90 °C
Temperature setting range 5 to 35 °C
Clock accuracy +/- 10 min/year
Spindle movement Linear, up to 4.5 mm, max. 2 mm on valve (1 mm/s)
Noise level <30 dBA
Safety classification Type 1
Open-window function Activated at temperature decrease or by ZigBee command
Weight (incl. batteries) 198 g (with RA adapter)
IP class
Integrations* Partner API, Google Assistant, Amazon Alexa
20 (not to be used in hazardous installations or in places where
it will be exposed to water)
3 | © Danfoss | FEC | 2021.12
Approvals, markings etc.
* Requires Danfoss Ally™ Gateway
AI340554761877en-020203
LAN
USB
RESET
95 mm
23 mm
95 mm
Dimensions
94 mm
55 mm
86 mm
55 mm
91 mm
55 mm
82 mm
55 mm
90 mm
55 mm
90 mm
95 mm
RESET
Ally
23 mm
USB
55 mm
with RA valve adapter with RAV/RAVL valve adapter
LAN
4 | © Danfoss | FEC | 2021.12
with M28 valve adapter with M30 valve adapter
with Caleffi valve adapter with Giacomini valve adapter
AI340554761877en-020203
Loading...