Danfoss AK-XM 205A Installation guide

Instructions
AK-XM 205A
080Z0010
-20°< t
-0°F < t 0 - 95% RH, non condensing IP10 / VBG4 UL: E357029
AI x 8 DO x 8
amb
amb
< 55°C
< 130°F
AK-XM 205A
max. 10 V
RI8HL602 09-2018
Keep the safety distance Low and high voltage must not be connected to the same output group
Max. 230 V
AC-1: max. 4 A (ohmic) AC-15: max. 3 A (Inductive)
Point
Terminal 9: 12 V Terminal 10: 5 V Terminal 21: 12 V Terminal 22: 5 V Terminal
11, 12, 23, 24 :
Signal Signal
type
S (sensor)
Pt 1000 ohm/0°C
S1 S2 Saux1
Pt 1000
Address
Saux2 SSA SdA
(Communication module)
P (pressure)
AKS 32R AKS 2050
AKS 32R
AKS 32
P0A P0B PcA PcB Paux
AKS 2050 MBS 8250
-1 - xx bar
AKS 32
(Controller)
-1 - zz bar
Signal type /
Active at
Module Point Terminals
1 (AI 1) 1 - 2
2 (AI 2) 3 - 4
3 (AI 3) 5 - 6
U (voltage)
Signal
0 - 5 V
...
0 - 10 V
4 (AI 4) 7 - 8
5 (AI 5) 13 - 14
On/Off Ext.
Main switch
Day/ Night
Door
DO
Comp 1
Comp 2
Fan 1
Alarm
Active at:
Closed
/
Open
Active at:
ON
/
OFF
6 (AI 6) 15 - 16
7 (AI 7) 17 - 18
8 (AI 8) 19 - 20
9 (DO 1) 25-26-27
10 (DO 2) 28-29-30
11 (DO 3) 31-32-33
12 (DO 4) 34-35-36
13 (DO 5) 37-38-39
14 (DO6) 40-41-42
15 (DO7) 43-44-45
16 (DO8) 46-47-48
The Product contains electrical components And may not be disposed together with domestic waste. Equipment must be separate collected with Electrical and Elec­tronic waste. According to Local and currently valid legislation.
2 Instructions RI8HL602 © Danfoss 09/2018 AK-XM 205A
Loading...