Danfoss AKVO 10 – 1, AKVO 10 – 6 Installation guide [da]

Installation guide

Electric expansion valve
Types AKVO 10 – 1 to AKVO 10 – 6

Refrigerants

R744, R22/R407C, R404A/R507, R410A, R134a, R407A, R23.
For other refrigerants, please contact Danfoss.

068R9806

Max. dierential pressure:

MOPD = 18 bar (260 psi)

Media temperatur range:

-50 °C < t

-58 °F < t

< 60 °C

media

< 140 °F

media

10 mm (3/8 in.)

Max. working pressure:

PS/MWP = 28 barg (410 psig)

Ambient temperatur range:

-50 °C < t

-58 °F < t

< 50 °C

amb

< 120 °F

amb

Max. test pressure:

P

= 42 barg (610 psig)

e

068R9806

64 mm (2 1/2 in.)

64 mm (2 1/2 in.)

12 mm (1/2 in.)

max. 150 °C (300 °F)

Min. 5% Ag

© Danfoss A/S (AC-MCI / sw), 2013-12 DKRCC.PI.VA1.E4.53 / 520H8345 1

Danfoss

68F610.10

Danfoss

68F748.10

UL approved Coil

(en-gb) Do not insulate
(da) Må ikke isoleres
(de) Nicht isolieren
(fr) Ne pas isoler
(es) No encerrar para

evitar condensación

Standard Coil

O-ring must be
in place

Warning

Never switch on power
to the coil when the coil
is dismounted from the
valve. Otherwise the
coil may be damaged
and there is risk of
injuries and burns.

2 DKRCC.PI.VA1.E4.53 / 520H8345 © Danfoss A/S (AC-MCI / sw), 2013-12