Danfoss AK-SM 880 Service guide

Service Guide

Database Loading AK-SM 880

ADAP-KOOL® Refrigeration Control System

Service Guide | AK-SM 880 Database Loading

1. Copy program onto a standard USB stick.

2. Press ‘Gear’/Conﬁguration button at top right of keypad so you are prompted to login. Factory password is 12345, then press OK.

3. Open door to right of display, plug USB stick into USB port.

4. Once USB is connected, pop-up window below should appear. Press ‘5’ to load database.

*If prompt does not appear, press menu button on keypad

and select ‘7’ for Flash Drive

5. Database will automatically load and controller reset. After reset, USB stick can be removed.

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | AX279128479285en-000101