Service Guide
Configuration
AK-CC 750 to AK-SM 800
ADAP-KOOL® Refrigeration Control System
Service Guide | AK-CC 750 to AK-SM 800 Configuration
Local Configuration
1. Set 750 address with rotary switches.
2. Connect to 750 with PC using Service Tool.
3. Under Select Application, choose proper Quick Setup. This will
disconnect you from Service Tool.
4. Reconnect, and go back to Select Application. Set ‘No of
evaporators’ to proper #.
Setup at System Manager
*This section is detailed with the assumption that an existing
program is in place including cases and addresses.
1. At system manager, press Menu button and select ‘2’ for
Network Nodes
2 | AX278948187212en-000101
© Danfoss | ADAP-KOOL® | 2018.08
Service Guide | AK-CC 750 to AK-SM 800 Configuration
2. Confirm LON channel is enabled at top of screen. Once
confirmed, highlight and select line ‘Press for complete rescan’.
3. Once rescan is complete, navigate to Config Status tab to
confirm case controller is online (will need to know address).
Downloading setpoints to AK-CC 750
1. In AK-SM 800, navigate to
Configuration->Control->Refrigeration->Circuits->Setup>Download.
*If prompted at any point to ‘retrieve configuration from device’,
select ‘No’.
2. Select addresses of case controllers to be downloaded, so
that check mark appears next to address. Then scroll to top of
screen and select ‘Press to download to selection’. Controller will
timestamp each address after download completes successfully.
© Danfoss | ADAP-KOOL® | 2018.08
AX278948187212en-000101 | 3
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
4 | AX278948187212en-000101
© Danfoss | ADAP-KOOL® | 2018.08
Loading...