Danfoss AC Line Cord Installation guide
AC Line Cord for BD Electronic Unit 101N0500
–
+
F
A
C
D
C
P
T
L
N
!!
100-240V AC
50/60Hz
8618
UL & VDE approved versions
Technical Info
Introduction
Specication
Packaging
Code numbers
We are pleased to introduce a new accessory for the BD compressor series:
An AC line cord for the electronic unit
101N0500 AC/DC version which features a built-in cord-relief.
The cable locks into the L-N socket. It
is available in both a VDE and UL approved version.
The cable square for the electrical
connectors is 0.75 mm2 for the VDE
version and 18 AWG for the UL version while the length is 1 m for both
of them. It is open in the end so that
the customer is free to mount a plug
of his choice.
The line cord will be available in Single
Pack and in I-Pack (80 pcs).
US Version (UL)
Single Pack: 105N9520
I-Pack (80 pcs.): 105N9521
EU Version (VDE)
Single Pack: 105N9530
I-Pack (80 pcs.): 105N9531
Wiring diagram
For the correct installation, please see
the wiring diagram below (g. 1). It is
important that the earthing is made
directly to the compressor unit earth
connection. Please notice that the
new cables do not t to the old electronic unit housings without snap-on.
See g. 2 for the new plug.
g. 1
!
Delivery
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already
on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
REFRIGERATION &
The new line cords will be available
from week 15/2007
g. 2
Danfoss Compressors GmbH
Mads-Clausen-Str. 7
D-24939 Flensburg / Germany
compressors.danfoss.com
AIR CONDITIONING DIVISION
DEHC.EI.100.O1.02/520N0443 Produced by Danfoss Compressors, DEHC6093, 04.2007
Loading...