Danfoss 51cc Service guide

Parts Manual
Series 42 Axial Piston Pumps
Size 41/51cc
www.danfoss.com
Parts Manual
Series 42 Pumps 41/51cc
Revision history Table of revisions
Date Changed Rev
December 2021 Added gear rotor cover assembly part number 0108
December 2020 Corrected control summing and feedback link part numbers 0107
August 2020 Updated Part Numer for Retaier-Slipper, and Changed document number from
November 2019 Correted 11 tooth coupling part number 0105
May 2018 Updated part number according to SB-2018-029 0104
August 2017 Updated to Engineering Tomorrow 0103
0106
2 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc

Contents

General Information
Input Shaft Configuration
Controls
Control Response
Housing
Charge Pump
System Pressure Protection
Loop By-pass
Displacement Limiter
Special Hardware
Loop Flushing
Filtration
Special Drive Features
Auxiliary Mounting
Service Parts Identification............................................................................................................................................................5
Nameplate...........................................................................................................................................................................................5
Date code............................................................................................................................................................................................ 6
About service bulletins...................................................................................................................................................................6
Procedure to identify a part..........................................................................................................................................................6
Regional part numbers............................................................................................................................................................. 6
Order code.......................................................................................................................................................................................... 7
Splined 13, 15, 19 teeth..................................................................................................................................................................8
Keyed and Tapered Shaft............................................................................................................................................................11
MDC Controls.................................................................................................................................................................................. 13
MDC...............................................................................................................................................................................................13
MDC with Solenoid.................................................................................................................................................................. 19
MDC with Neutral Start Switch............................................................................................................................................34
MDC with Solenoid and Neutral Start Switch.................................................................................................................40
EDC Controls....................................................................................................................................................................................61
EDC.................................................................................................................................................................................................61
HC-EDC......................................................................................................................................................................................... 64
3 Position Control.......................................................................................................................................................................... 67
3-position F2NN-F5NN............................................................................................................................................................67
Gasket/Orifice..................................................................................................................................................................................69
Housing XDC, Base........................................................................................................................................................................ 71
Housing XDC, Full Featured....................................................................................................................................................... 73
Housing XDC, with Loop Flushing...........................................................................................................................................75
Housing XDC, No Loop Flushing, Full Flow Filtration.......................................................................................................77
Housing with Plug Expansion....................................................................................................................................................79
Housing NFPE/FNR, Full Featured (Code 61 Ports)............................................................................................................81
Housing NFPH, full featured.......................................................................................................................................................83
Charge Pump 11cc and 15.6cc..................................................................................................................................................85
System Check Relief...................................................................................................................................................................... 87
By-pass Valve...................................................................................................................................................................................93
Side 1.................................................................................................................................................................................................. 95
Side 2................................................................................................................................................................................................106
Speed Sensor and Valve Plate.................................................................................................................................................114
Loop Flushing Spool and Relief Valve..................................................................................................................................117
Loop Flushing Defeated............................................................................................................................................................119
Filtration..........................................................................................................................................................................................121
NFP....................................................................................................................................................................................................125
Standard..........................................................................................................................................................................................128
©
Danfoss | December 2021 AX152886483959en-000108 | 3
Parts Manual
Series 42 Pumps 41/51cc
Contents
Displacement
Overhaul Seal Kit
Service Bulletin
Auxiliary Mounting A-Pad........................................................................................................................................................ 130
Auxiliary Mounting, special A-pad........................................................................................................................................ 132
Auxiliary Mounting B-Pad.........................................................................................................................................................134
No Auxiliary Pad...........................................................................................................................................................................136
Auxiliary Mounting special B-pad..........................................................................................................................................138
Cylinder Block Kit 41cc...............................................................................................................................................................140
Cylinder Block Kit 51cc...............................................................................................................................................................142
Seal Kit............................................................................................................................................................................................. 144
SB-1996-021...................................................................................................................................................................................147
SB-1996-023...................................................................................................................................................................................148
SB-1997-02.....................................................................................................................................................................................149
SB-1997-026...................................................................................................................................................................................150
SB-1997-027...................................................................................................................................................................................151
SB-1997-029C................................................................................................................................................................................152
SB-1997-034...................................................................................................................................................................................156
SB-1997-046...................................................................................................................................................................................157
SB-1998-006...................................................................................................................................................................................158
SB-1998-030...................................................................................................................................................................................159
SB-1998-039...................................................................................................................................................................................160
SB-1998-055...................................................................................................................................................................................162
SB-1998-079...................................................................................................................................................................................164
SB-1998-082...................................................................................................................................................................................165
SB-1998-085...................................................................................................................................................................................166
SB-1999-022...................................................................................................................................................................................167
SB-1999-037...................................................................................................................................................................................168
SB-1999-044A................................................................................................................................................................................169
SB-1999-048...................................................................................................................................................................................170
SB-1999-064...................................................................................................................................................................................173
SB-1999-066...................................................................................................................................................................................174
SB-2000-035...................................................................................................................................................................................175
SB-2001-008...................................................................................................................................................................................177
SB-2001-022A................................................................................................................................................................................179
SB-2002-012...................................................................................................................................................................................180
SB-2007-016...................................................................................................................................................................................181
SB-2009-070...................................................................................................................................................................................182
SB-2018-029...................................................................................................................................................................................184
SB-2018-029A................................................................................................................................................................................185
4 | © Danfoss | December 2021 AX152886483959en-000108
MADE IN JAPAN.
Serial No.
A-01-34-12345
Model Code
Model No./Ident No.
4412102
42L41 D E2C7 00 B2
B 2 C F N 17 17 N N N
NNN NNN
Parts Manual
Series 42 Pumps 41/51cc

General Information

Service Parts Identification

Nameplate

The following information and procedure is used to identify the module group, item number, manufacture date, part number, and part name of the parts included in the .
The parts listed include all parts which may be used when performing either “Minor Repairs”, “Major Repairs” or “Conversions” on the .
Each unit will have a nameplate affixed to the housing. The nameplate will include the following information:
Model Code
The Danfoss model code completely defines the specific unit and must be used when ordering parts to service this product.
Model Number
The Danfoss model number is used by the factory in manufacturing. On repeat orders, a complete unit can be ordered by the model number.
Serial Number
The Danfoss serial number is used to identify the manufacture date and the unit sequence in the build. The serial number is also used to identify the units warranty time period.
The letter code indicates the location of original manufacture (assembly). The first number (2 digits) indicates the year of manufacture. The second number (2 digits) indicates the
calendar week of manufacture. The third number (5 digits) is a sequential number used to identify a specific unit.
©
Danfoss | December 2021 AX152886483959en-000108 | 5
Parts Manual
Series 42 Pumps 41/51cc
General Information

Date code

About service bulletins

The date code is defined as the year and week of manufacture. The same item number may list more than one part number. This indicates that there is more than one configuration for that item number. You will see that there are different date codes for the different part numbers. Find the date code of your unit from the nameplate to determine which service part number you need to order.
Example: The service part desired is item G30
Order Code Item Date Begin Date End Part Number Part Name Qty. per
80 G30 89-17 8000243 End cap gasket 1
G30 89-16 8000151 End cap gasket
(SB-1995-006)
Model/Kit
1
All units using this order code with a date code prior to 89-17 must use part number “8000151.” All units with a date code of 89-17 and newer must use part number “8000243.”
A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you desire. You must read that Service Bulletin prior to ordering that part. The information contained in these Service Bulletins, as of the print date of this bulletin, are included at the end of this manual. Service Bulletins contain more detailed information such as interchangeability, what additional parts are involved, etc. It is suggested that you add additional Service Bulletins to this manual as you receive them.

Procedure to identify a part

The modular design of this product results in a simplified service parts list and part number identification procedure.
The same item numbers are used for same part names on all units within a product type. A part number that has another number following it in parentheses is done to make this a world wide manual.

Regional part numbers

Some part numbers are region specific and should be ordered accordingly. As an example, the part number (example: 314583 (9008000-0118) will be used. The first number is sold
in Germany. The number in parentheses is sold in the United States. Customers would order 9008000-0118 if ordering the part in the United States.
6 | © Danfoss | December 2021 AX152886483959en-000108
Series
Pump Size (cc)
Control Type
Control Handle/Spool
Control Response Time
Housing
Charge/Implement Pump
Rotation
Input Shaft
Loop Flushing
Filtration
Relief Valve Setting
Displacement Limiter (side 1)
Loop Bypass Valve
System Pressure Protection (port A)
Special Hardware
Special Features
Special Drive Features
Auxiliary Mounting Pad
System Pressure Protection (port B)
Displacement Limiter (side 2)
4
2
R
41D
NAN B
0 0 B22 B
N V
171 7
N N
N
F
N N N
N N N
Y
C
D E F Q R G S T U H J K L M N P
Parts Manual
Series 42 Pumps 41/51cc
General Information

Order code

©
Danfoss | December 2021 AX152886483959en-000108 | 7
C002
C005
F096
C020
C017
C018
C003
C001
Parts Manual
Series 42 Pumps 41/51cc

Input Shaft Configuration

Splined 13, 15, 19 teeth

Parts for 13, 15, and 19 teeth splined shaft options are in the illustration and tables below.
8 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Input Shaft Configuration
Order code: C and D common parts
Item Date Begin Date End Part Number Part Name Qty. per
C002 95-25 5000098 Retaining ring 1 C002 95-18 95-24 615245(9006300-0137) Retaining ring 1 C002 94-05 95-17 5000098 Retaining ring 1 C003 07-18 1735399 Roller bearing 1 C003 95-25 4700068 Roller bearing 1 C003 95-18 95-24 373282(9001315-0011) Roller bearing 1 C003 94-05 95-17 4700068 Roller bearing 1 C017 94-25 38315 O-ring 1 C018 07-18 9008000-0131 Lip seal 1 C018 95-25 506515(9008000-0131) Lip seal 1 C018 95-18 95-24 314583(9008000-0118) Lip seal 1 C018 94-05 95-17 506515(9008000-0131) Lip seal 1 C020 07-18 1735155 Seal carrier 1 C020 94-25 4800264 Seal carrier 1 C020 95-18 95-24 4800405 Seal carrier 1 C020 95-17 4800264 Seal carrier 1
Model/Kit
C (splined, 13 teeth) parts
C001 07-18 1716097 Shaft 13 tooth spline 1 C001 95-25 4410034 Shaft 13 tooth spline 1 C001 95-18 95-24 4410085 Shaft 13 tooth spline 1 C001 94-05 95-17 4410034 Shaft 13 tooth spline 1 C005 95-25 4410042 Shaft assembly, 13 tooth spline 1
D (splined, 15 teeth) parts
C001 07-18 1716096 Shaft 15 tooth spline 1 C001 95-25 4410005 Shaft 15 tooth spline 1 C001 95-18 95-24 4410086 Shaft 15 tooth spline 1 C001 94-05 95-17 4410005 Shaft 15 tooth spline 1 C005 95-25 4410027 Shaft assembly, 15 tooth spline 1
E (splined, 19 teeth) parts
C001 07-18 1716098 Shaft 19 tooth spline 1 C001 94-24 4410037 Shaft 19 tooth spline 1 C002 07-18 9006300-0137 Retaining ring 1 C002 94-24 5000098 Retaining ring 1 C003 07-18 1735400 Roller bearing 1 C003 94-24 4700069 Roller bearing 1 C005 94-24 4410043 Shaft assembly, 19 tooth spline 1 C017 94-25 38315 O-ring 1 C018 07-18 9008000-0118 Lip seal 1 C018 95-18 95-24 314583(9008000-0118) Lip seal 1
©
Danfoss | December 2021 AX152886483959en-000108 | 9
Parts Manual
Series 42 Pumps 41/51cc
Input Shaft Configuration
E (splined, 19 teeth) parts (continued)
C020 07-18 1735156 Seal carrier 1 C020 94-24 4800405 Seal carrier 1
10 | © Danfoss | December 2021 AX152886483959en-000108
C002
C006
C002
C005
C006
C002
C005
F096
C020
F096
C020
C017
C003
C001
C003
C001
C003
C001
C017
C018
C005
Parts Manual
Series 42 Pumps 41/51cc
Input Shaft Configuration

Keyed and Tapered Shaft

Part numbers for the straight keyed, tapered, and splined, 15 tooth (unsealed) shaft options are found below.
©
Danfoss | December 2021 AX152886483959en-000108 | 11
Parts Manual
Series 42 Pumps 41/51cc
Input Shaft Configuration
Shaft common parts
Item Date Begin Date End Part Number Part Name Qty. per
C002 94-25 5000098 Retaining ring 1 C003 07-18 1735399 Roller bearing 1 C003 94-25 06-01 4700068 Roller bearing 1 C017 94-25 38315 O-ring 1 C018 07-18 9008000-0131 Lip seal 1 C018 94-25 06-01 506515 (9008000-0131) Lip seal 1 C020 07-18 1735155 Seal carrier 1 C020 94-25 06-01 4800264 Seal carrier 1
Order code: G parts
C001 07-18 1716099 Shaft, straight keyed 1 C001 94-25 4410038 Shaft, straight keyed 1 C005 94-25 4410044 Shaft assembly, straight keyed 1 C006 07-18 9003261-2524 Key 1 C006 94-25 5000158(9003261-2524) Key 1
Model/Kit
K parts
C001 94-25 4410039 Shaft, tapered 1 C005 94-25 4410045 Shaft assembly, tapered 1 C006 07-18 9003310-2514 Key 1 C006 94-25 532432(9003310-2514) Key 1
R parts
C001 07-18 1716096 Shaft, tapered 1 C001 99-47 4410005 Shaft, tapered 1 C005 99-47 4410027 Shaft assembly, 15 tooth spline 1
12 | © Danfoss | December 2021 AX152886483959en-000108
F036
F035 F034
D013
D012
D010
D017
D019
D016
D019
D017
D016
D011
D035
D035A
D90
D032
D032A
D91
D92
D015
D014
D002
D070
Parts Manual
Series 42 Pumps 41/51cc

Controls

MDC Controls

MDC AAN3-ANNA
Part numbers for MDC controls can be found below.
©
Danfoss | December 2021 AX152886483959en-000108 | 13
Parts Manual
Series 42 Pumps 41/51cc
Controls
Order code: common parts
Item Date Begin Date End Part Number Part Name Qty. per
D002 07-18 9007314-0607 Screw (AAM0603001) 7 D002 93-20 5000002 Screw 7 D010 07-18 1734449 Screw 1 D010 93-20 4800326 Screw 1 D011 93-20 11192675 Control summing link 1 D012 93-20 11192686 Control feedback link 1 D013 93-20 4800201 Neutral adjust link 1 D014 07-17 1734450 Neutral adjust screw 1 D014 93-20 07-17 4800658 Neutral adjust screw (SB-1997-026) 1 D015 93-20 336826 Seal nut 1 D016 07-18 9009660-3100 Washer 1 D016 93-20 689018(9009660-3100) Washer 1 D019 07-18 9003513-0800 Nut 1 D019 93-20 040642(9003513-0800) Nut 1 D032 93-20 4800615 Plug 1 D032A 07-18 9004201-5000 O-ring 1 D032A - 001131(9004201-5000) O-ring 1 D035 07-18 9005110-7500 Plug 1 D035 98-02 681296(9005110-7500) Plug 1 D035A 07-18 9004201-5000 O-ring 1 D035A 98-02 001131(9004201-5000) O-ring 1 D91 07-18 1746004 Control backlash spring 1 D91 - 4800515 Control backlash spring 1 D91 - - 4800243 Control backlash spring 1 D92 07-18 1746003 Spring adapter 1 D92 - 4800519 Spring adapter 1 F034 93-20 98-01 4800200 Control spool cover gasket(SB-1997-029) 1 F035 93-20 98-01 4800199 Control spool cover(SB-1997-029) 1 F036 93-20 98-01 5000001 Screw(SB-1997-029) 2
Model/Kit
AAN3 parts
D017 93-45 9800916 Control handle 1 D070 93-45 4800529 Control assembly 1 D90 93-45 4800464 Control spool assembly 1
AAN5 parts
D017 97-10 4800689 Control handle, off-set (SB-1997-046) 1 D070 97-10 4800529 Control assembly 1 D90 97-10 4800410 Control spool assembly 1
14 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Controls
ANNA parts
D017 94-14 4800689 Control handle, off-set (SB-1997-046) 1 D070 94-14 4800529 Control assembly 1 D90 94-14 4800464 Control spool assembly 1
©
Danfoss | December 2021 AX152886483959en-000108 | 15
F036
F035 F034
D013
D012
D010
D017
D019
D016
D019
D017
D016
D011
D035
D035A
D90
D032
D032A
D91
D92
D015
D014
D002
D070
Parts Manual
Series 42 Pumps 41/51cc
Controls
MDC ANNB-LNN8
16 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Controls
Order code: common parts
Item Date Begin Date End Part Number Part Name Qty. per
D002 07-18 9007314-0607 Screw (AAM0603001) 7 D002 93-20 5000002 Screw 7 D010 07-18 1734449 Screw 1 D010 93-20 4800326 Screw 1 D011 93-20 11192675 Control summing link 1 D012 93-20 11192686 Control feedback link 1 D013 93-20 4800201 Neutral adjust link 1 D014 07-17 1734450 Neutral adjust screw 1 D014 93-20 07-17 4800658 Neutral adjust screw (SB-1997-026) 1 D015 93-20 336826 Seal nut 1 D016 07-18 9009660-3100 Washer 1 D016 93-20 689018(9009660-3100) Washer 1 D019 07-18 9003513-0800 Nut 1 D019 93-20 040642(9003513-0800) Nut 1 D032 93-20 4800615 Plug 1 D032A 07-18 9004201-5000 O-ring 1 D032A - 001131(9004201-5000) O-ring 1 D035 07-18 9005110-7500 Plug 1 D035 98-02 681296(9005110-7500) Plug 1 D035A 07-18 9004201-5000 O-ring 1 D035A 98-02 001131(9004201-5000) O-ring 1 D91 07-18 1746004 Control backlash spring 1 D91 - 4800515 Control backlash spring 1 D91 - - 4800243 Control backlash spring 1 D92 07-18 1746003 Spring adapter 1 D92 - 4800519 Spring adapter 1 F034 93-20 98-01 4800200 Control spool cover gasket(SB-1997-029) 1 F035 93-20 98-01 4800199 Control spool cover(SB-1997-029) 1 F036 93-20 98-01 5000001 Screw(SB-1997-029) 2
Model/Kit
AANB parts
D017 06-01 9800916 Control handle 1 D070 06-01 4800529 Control assembly 1 D90 06-01 4800410 Control spool assembly 1
LNN3 parts
D017 94-02 9800916 Control handle 1 D070 94-02 4800522 Control assembly 1 D90 94-02 4800464 Control spool assembly 1
©
Danfoss | December 2021 AX152886483959en-000108 | 17
Parts Manual
Series 42 Pumps 41/51cc
Controls
LNN8 parts
D017 96-09 4800689 Control handle, off-set (SB-1997-046) 1 D070 96-09 4800522 Control assembly 1 D90 96-09 4800488 Control spool assembly 1
LNNA parts
D017 96-09 4800689 Control handle, off-set (SB-1997-046) 1 D070 96-09 4800522 Control assembly 1 D90 96-09 4800464 Control spool assembly 1
18 | © Danfoss | December 2021 AX152886483959en-000108
D013
D012
D010
D015
D014
D011
D90
D032
D032A
D91
D92
D070
D056
D053
D054
D056A
D017
D019
D016
D017
D019
D016
F036
F035 F034
D035
D035A
D002
Parts Manual
Series 42 Pumps 41/51cc
Controls
MDC ANA3-ANAB
Part numbers for MDC controls (with solenoid) can be found below.
©
Danfoss | December 2021 AX152886483959en-000108 | 19
Parts Manual
Series 42 Pumps 41/51cc
Controls
Order code: common parts
Item Date Begin Date End Part Number Part Name Qty. per
D002 07-18 9007314-0607 Screw (AAM0603001) 7 D002 93-20 5000002 Screw 7 D010 07-18 1734449 Screw 1 D010 93-20 4800326 Screw 1 D011 93-20 11192675 Control summing link 1 D012 93-20 11192686 Control feedback link 1 D013 93-20 4800201 Neutral adjust link 1 D014 07-17 1734450 Neutral adjust screw 1 D014 93-20 07-17 4800658 Neutral adjust screw (SB-1997-026) 1 D015 93-20 336826 Seal nut 1 D016 07-18 9009660-3100 Washer 1 D016 93-20 689018(9009660-3100) Washer 1 D019 07-18 9003513-0800 Nut 1 D019 93-20 040642(9003513-0800) Nut 1 D032 93-20 4800615 Plug 1 D032A 07-18 9004201-5000 O-ring 1 D032A - 001131(9004201-5000) O-ring 1 D035 07-18 9005110-7500 Plug 1 D035 98-02 681296(9005110-7500) Plug 1 D035A 07-18 9004201-5000 O-ring 1 D035A 98-02 001131(9004201-5000) O-ring 1 D91 07-18 1746004 Control backlash spring 1 D91 - 4800515 Control backlash spring 1 D91 - - 4800243 Control backlash spring 1 D92 07-18 1746003 Spring adapter 1 D92 - 4800519 Spring adapter 1 F034 93-20 98-01 4800200 Control spool cover gasket(SB-1997-029) 1 F035 93-20 98-01 4800199 Control spool cover(SB-1997-029) 1 F036 93-20 98-01 5000001 Screw(SB-1997-029) 2
Model/Kit
ANA3 parts
D017 97-36 9800916 Control handle 1 D053 97-36 4800411 Brake solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 Retaining ring 1 D056 97-36 4700043 Solenoid, 12v, Weatherpack connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 4800518 Control assembly 1 D90 97-36 4800464 Control spool assembly 1
20 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Controls
ANA5 parts
D017 97-33 4800689 Control handle, off-set (SB-1997-046) 1 D053 97-33 4800411 Brake solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-33 01-30 5000196 Retaining ring (SB-2001-008) 1 D056 97-33 4700043 Solenoid, 12v, Weatherpack connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-33 633354(9004104-0180) O-ring 1 D070 97-33 4800518 Control assembly 1 D90 97-33 4800410 Control spool assembly 1
ANAB parts
D017 97-36 9800916 Control handle 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 D056 97-36 4700043 Solenoid, 12V, Weatherpack connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 4800518 Control Assembly 1 D90 97-36 4800410 Control Spool Assembly 1
©
Danfoss | December 2021 AX152886483959en-000108 | 21
D013
D012
D010
D015
D014
D011
D90
D032
D032A
D91
D92
D070
D056
D053
D054
D056A
D017
D019
D016
D017
D019
D016
F036
F035 F034
D035
D035A
D002
Parts Manual
Series 42 Pumps 41/51cc
Controls
MDC ANB5-ANBB
22 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Controls
Order code: common parts
Item Date Begin Date End Part Number Part Name Qty. per
D002 07-18 9007314-0607 Screw (AAM0603001) 7 D002 93-20 5000002 Screw 7 D010 07-18 1734449 Screw 1 D010 93-20 4800326 Screw 1 D011 93-20 11192675 Control summing link 1 D012 93-20 11192686 Control feedback link 1 D013 93-20 4800201 Neutral adjust link 1 D014 07-17 1734450 Neutral adjust screw 1 D014 93-20 07-17 4800658 Neutral adjust screw (SB-1997-026) 1 D015 93-20 336826 Seal nut 1 D016 07-18 9009660-3100 Washer 1 D016 93-20 689018(9009660-3100) Washer 1 D019 07-18 9003513-0800 Nut 1 D019 93-20 040642(9003513-0800) Nut 1 D032 93-20 4800615 Plug 1 D032A 07-18 9004201-5000 O-ring 1 D032A - 001131(9004201-5000) O-ring 1 D035 07-18 9005110-7500 Plug 1 D035 98-02 681296(9005110-7500) Plug 1 D035A 07-18 9004201-5000 O-ring 1 D035A 98-02 001131(9004201-5000) O-ring 1 D91 07-18 1746004 Control backlash spring 1 D91 - 4800515 Control backlash spring 1 D91 - - 4800243 Control backlash spring 1 D92 07-18 1746003 Spring adapter 1 D92 - 4800519 Spring adapter 1 F034 93-20 98-01 4800200 Control spool cover gasket(SB-1997-029) 1 F035 93-20 98-01 4800199 Control spool cover(SB-1997-029) 1 F036 93-20 98-01 5000001 Screw(SB-1997-029) 2
Model/Kit
ANB5 parts
D017 97-36 4800689 Control handle, off-set (SB-1997-046) 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 Retaining ring (SB-2001-008) 1 D056 97-36 4700045 Solenoid, 12V, DIN connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 4800537 Control Assembly 1 D90 97-36 4800410 Control Spool Assembly 1
©
Danfoss | December 2021 AX152886483959en-000108 | 23
Parts Manual
Series 42 Pumps 41/51cc
Controls
ANNB parts
D017 97-36 9800916 Control handle 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 Retaining ring (SB-2001-008) 1 D056 97-36 4700045 Solenoid, 12V, DIN connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 4800537 Control Assembly 1 D90 97-36 4800410 Control Spool Assembly 1
24 | © Danfoss | December 2021 AX152886483959en-000108
D013
D012
D010
D015
D014
D011
D90
D032
D032A
D91
D92
D070
D056
D053
D054
D056A
D017
D019
D016
D017
D019
D016
F036
F035 F034
D035
D035A
D002
Parts Manual
Series 42 Pumps 41/51cc
Controls
MDC ANJ5-ANK5
©
Danfoss | December 2021 AX152886483959en-000108 | 25
Parts Manual
Series 42 Pumps 41/51cc
Controls
Order code: common parts
Item Date Begin Date End Part Number Part Name Qty. per
D002 07-18 9007314-0607 Screw (AAM0603001) 7 D002 93-20 5000002 Screw 7 D010 07-18 1734449 Screw 1 D010 93-20 4800326 Screw 1 D011 93-20 11192675 Control summing link 1 D012 93-20 11192686 Control feedback link 1 D013 93-20 4800201 Neutral adjust link 1 D014 07-17 1734450 Neutral adjust screw 1 D014 93-20 07-17 4800658 Neutral adjust screw (SB-1997-026) 1 D015 93-20 336826 Seal nut 1 D016 07-18 9009660-3100 Washer 1 D016 93-20 689018(9009660-3100) Washer 1 D019 07-18 9003513-0800 Nut 1 D019 93-20 040642(9003513-0800) Nut 1 D032 93-20 4800615 Plug 1 D032A 07-18 9004201-5000 O-ring 1 D032A - 001131(9004201-5000) O-ring 1 D035 07-18 9005110-7500 Plug 1 D035 98-02 681296(9005110-7500) Plug 1 D035A 07-18 9004201-5000 O-ring 1 D035A 98-02 001131(9004201-5000) O-ring 1 D91 07-18 1746004 Control backlash spring 1 D91 - 4800515 Control backlash spring 1 D91 - - 4800243 Control backlash spring 1 D92 07-18 1746003 Spring adapter 1 D92 - 4800519 Spring adapter 1 F034 93-20 98-01 4800200 Control spool cover gasket(SB-1997-029) 1 F035 93-20 98-01 4800199 Control spool cover(SB-1997-029) 1 F036 93-20 98-01 5000001 Screw(SB-1997-029) 2
Model/Kit
ANJ5 parts
D017 97-36 4800689 Control handle, off-set (SB-1997-046) 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 1 D056 97-36 4700145 Solenoid, 12V, Deutsch connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 1746723 Control Assembly 1 D90 97-36 4800410 Control Spool Assembly 1
26 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Controls
ANK5 parts
D017 97-36 4800689 Control handle, off-set (SB-1997-046) 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 1 D056 97-36 4700158 Solenoid, 24V, Deutsch connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 4410358 Control Assembly 1 D90 97-36 4800410 Control Spool Assembly 1
©
Danfoss | December 2021 AX152886483959en-000108 | 27
D013
D012
D010
D015
D014
D011
D90
D032
D032A
D91
D92
D070
D056
D053
D054
D056A
D017
D019
D016
D017
D019
D016
F036
F035 F034
D035
D035A
D002
Parts Manual
Series 42 Pumps 41/51cc
Controls
MDC ANKB-LNBA
28 | © Danfoss | December 2021 AX152886483959en-000108
Parts Manual
Series 42 Pumps 41/51cc
Controls
Order code: common parts
Item Date Begin Date End Part Number Part Name Qty. per
D002 07-18 9007314-0607 Screw (AAM0603001) 7 D002 93-20 5000002 Screw 7 D010 07-18 1734449 Screw 1 D010 93-20 4800326 Screw 1 D011 93-20 11192675 Control summing link 1 D012 93-20 11192686 Control feedback link 1 D013 93-20 4800201 Neutral adjust link 1 D014 07-17 1734450 Neutral adjust screw 1 D014 93-20 07-17 4800658 Neutral adjust screw (SB-1997-026) 1 D015 93-20 336826 Seal nut 1 D016 07-18 9009660-3100 Washer 1 D016 93-20 689018(9009660-3100) Washer 1 D019 07-18 9003513-0800 Nut 1 D019 93-20 040642(9003513-0800) Nut 1 D032 93-20 4800615 Plug 1 D032A 07-18 9004201-5000 O-ring 1 D032A - 001131(9004201-5000) O-ring 1 D035 07-18 9005110-7500 Plug 1 D035 98-02 681296(9005110-7500) Plug 1 D035A 07-18 9004201-5000 O-ring 1 D035A 98-02 001131(9004201-5000) O-ring 1 D91 07-18 1746004 Control backlash spring 1 D91 - 4800515 Control backlash spring 1 D91 - - 4800243 Control backlash spring 1 D92 07-18 1746003 Spring adapter 1 D92 - 4800519 Spring adapter 1 F034 93-20 98-01 4800200 Control spool cover gasket(SB-1997-029) 1 F035 93-20 98-01 4800199 Control spool cover(SB-1997-029) 1 F036 93-20 98-01 5000001 Screw(SB-1997-029) 2
Model/Kit
ANKB parts
D017 97-36 9800916 Control handle 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D056A 97-36 1 D070 97-36 4410358 Control Assembly 1 D90 97-36 4800410 Control Spool Assembly 1
©
Danfoss | December 2021 AX152886483959en-000108 | 29
Parts Manual
Series 42 Pumps 41/51cc
Controls
LNBA parts
D017 97-36 4800689 Control handle, off-set (SB-1997-046) 1 D053 97-36 4800411 Brake Solenoid spool 1 D054 01-31 4280279 Retaining ring (SB-2001-008) 1 D054 97-36 01-30 5000196 1 D056 97-36 4700045 Solenoid, 12V, DIN connector 1 D056A 07-18 9004104-0180 O-ring 1 D056A 97-36 633354(9004104-0180) O-ring 1 D070 97-36 4800542 Control Assembly 1 D90 97-36 4800464 Control Spool Assembly 1
30 | © Danfoss | December 2021 AX152886483959en-000108
Loading...
+ 157 hidden pages