Page 1
MAKING MODERN LIVING POSSIBLE
BD Controller 101N07xx Series 24 V DC
with Tool4Cool® LabEdition software and
Danfoss One Wire/LIN gateway
Quick Start Guide
Page 2
Quick Start Guide BD Controller 101N07xx Series 24 V DC
Page 3
Quick Start Guide BD Controller 101N07xx Series 24 V DC
3
DEHC.PS.100.J1.02
Quick Start Guide 1. Checklist ..........................................................................................................................4
2. Connect cables ..............................................................................................................5
3. Install software ..............................................................................................................6
4. Install product key .......................................................................................................8
5. Connect network ..........................................................................................................9
6. Ready to operate ....................................................................................................... 11
7. Ordering .......................................................................................................................12
8. Further information ..................................................................................................13
Page 4
Quick Start Guide BD Controller 101N07xx Series 24 V DC
4
DEHC.PS.100.J1.02
1. Checklist
Check that you have the following:
BD electronic controller
101N07xx Series 48V DC
101N0715 or•
101N0710 (discontinued)•
Tool4Cool® LabEdition software
installation CD
NTC temperature sensor
(alternative: mechanical thermostat)
DC line cords
Product key for BD compressor controller
(not necessary with Tool4Cool® Version 1.02)
DH3TT6RBAD1GW8G68ZM1N8G62ZMCOO916IER6GH2YZEIR
Danfoss One Wire/LIN gateway with
connection cables
Gateway•
One Wire/LIN gateway•
Communication cable
USB port connector to PC•
USB 2.0 A/B cable•
Ordering: See section 7.0
Page 5
Quick Start Guide BD Controller 101N07xx Series 24 V DC
5
DEHC.PS.100.J1.02
2. Connect cables
8633
Main switch
Fuse
Po wer supply
Fa n
-
+
Fa n
-
+
NTC resistor
– t°
option 1option 2
optional
optional
mech. Thermostat
One Wire
LIN Gateway
T e rminal plug
USB
(only for supply)
COM
USB
Danfoss One Wire
LIN Gateway
OneWire
/ LIN
USB
Code no.:105N9501
RS232/485
USB 2.0
Electronics
(OneWire / LIN)
RS232
RS485
Tx Rx
option 2
option 1
USB 2.0 A/B Cable
COM port connector to PC
NTC temperature sensor
Electronic Unit
One Wire/LIN Gateway Communication Cable
USB port connector to PC
USB port connector to PC
Gateway
Power supply cableSerial RS232 Cable with USB Voltage Supply
Page 6
Quick Start Guide BD Controller 101N07xx Series 24 V DC
6
DEHC.PS.100.J1.02
3. Install software
1. Check that you have the latest update of .NET Framework from www.windowsupdate.com.
2. Insert the Tool4Cool® installation CD.
This view will appear:
Page 7
Quick Start Guide BD Controller 101N07xx Series 24 V DC
7
DEHC.PS.100.J1.02
3. Double-click on Tool4Cool® Software Installation. Run the file setup.exe. Then follow the instructions
in the Setup Wizard.
1
2
3
4
5
Page 8
Quick Start Guide BD Controller 101N07xx Series 24 V DC
8
DEHC.PS.100.J1.02
4. Install Product Key
1. Start Tool4Cool® LabEditon by double clicking on the icon on the desktop:
2. Select Help in the menu bar.
3. Select Product Keys from the drop-down menu:
4. This dialog box will open:
In the Add Product Key field, type the Product Key shown in Section 1: Checklist.
Click on the Add Key button. The Product Key is now active.
Page 9
Quick Start Guide BD Controller 101N07xx Series 24 V DC
9
DEHC.PS.100.J1.02
5. Connect network
1. Select File in the menu bar.
2. Select Connect Network in the drop-down menu:
3. This dialog box will open:
Page 10
Quick Start Guide BD Controller 101N07xx Series 24 V DC
10
DEHC.PS.100.J1.02
In the Connect using field, select the COM port to which the gateway is connected.
Fill in Description (optional).
Press OK.
Wait a short time. The LEDs on the gateway will flicker, then a red arrow will appear in front of the
description (COM/USB network).
The controller is now accessible via Tool4Cool®.
Page 11
Quick Start Guide BD Controller 101N07xx Series 24 V DC
11
DEHC.PS.100.J1.02
6. Ready to operate
Click on the red arrows to view the controller and its parameter groups:
Click on a parameter group name to view details to the right of the screen:
Page 12
Quick Start Guide BD Controller 101N07xx Series 24 V DC
12
DEHC.PS.100.J1.02
6. Ordering
Model Code number Description
Compressor
BD350GH 24 V DC supply 102Z3016
BD350/350GH 24 V DC supply - twin compressor 102Z3017
Single-Pack
Electronic control unit 24 V DC 101N0715 40W/60W fan output, ECO function
24 V DC line cord, 900 mm, 6mm
2
105N9542 accessories
24 V DC line cord, 2000 mm, 6 mm
2
105N9540 accessories
24 V DC line cord, 5000 mm, 6 mm
2
105N9538 accessories
Temperature sensor, 470 mm, spade connectors 105N9612 accessories
Temperature sensor, 1000 mm, spade connectors 105N9614 accessories
Temperature sensor, 1500 mm, spade connectors 105N9616 accessories
Danfoss One Wire/LIN gateway with cables & driver 105N9501 accessories
Industrial-Pack (I-Pack)
Electronic control unit 24 V DC 101N0714 36 pcs.
Communication cable, 1500 mm, AMP connector 105N9545 100 pcs.
Communication cable, 3000 mm, AMP connector 105N9547 50 pcs.
24 V DC line cord, 900 mm, 6mm
2
105N3543 36 pcs.
24 V DC line cord, 2000 mm, 6 mm
2
105N9541 36 pcs.
24 V DC line cord, 5000 mm, 6 mm
2
105N9539 36 pcs.
Temperature sensor, 470 mm, spade connectors 105N9613 200 pcs.
Temperature sensor, 1000 mm, spade connectors 105N9615 100 pcs.
Temperature sensor, 1500 mm, spade connectors 105N9617 100 pcs.
Temperature sensor, 400 mm, AMP connector 105N9611 200 pcs.
Software
Package
Tool4Cool® LabEdition, 1 license 105N9300 PC software, 1 licence version
Tool4Cool® LabEdition, 2 license 105N9301 PC software, 2 licence version
Tool4Cool® LabEdition, 5 license 105N9302 PC software, 5 licence version
Page 13
Quick Start Guide BD Controller 101N07xx Series 24 V DC
13
DEHC.PS.100.J1.02
7. Further information
For detailed installation and operation instructions, please refer to other literature, currently availabe
from Danfoss:
Title Danfoss Literature Number
Tool4Cool® LabEdition Operating Instructions
Tool4Cool® LabEdition Bedienungsanleitung (German)
DEHC.PI.300.B__.02
DEHC.PI.300.B__.03
BD Controller 101N07xx Series 24 V DC with
Tool4Cool® LabEdition software
Operation Instructions
DEHC.PS.100.I__.02
BD Controller 101N07xx Series 24 V DC with
Tool4Cool® LabEdition software and Danfoss One Wire/LIN gateway
Quick Start Guide
DEHC.PS.100.J__.02
Danfoss One Wire/LIN Gateway 105N9501
Instructions
DEHC.PI.100.K__.02
Electronic Unit for BD350GH Compressor 101N0715 24 V DC
Instructions
DEHC.EI.100.Z__.02
Electronic Unit for BD350GH Compressor 101N0710 24 V DC (discontinued)
Instructions
DEHC.EI.100.P__.02
DC Line Cords for BD350GH Electronic Unit 24V
Instructions
DEHC.EI.100.E__.02
Temperature Sensors for BD350GH Electronic Unit
Instructions
DEHC.PI.100.G__.02
Communication Cable for BD350GH Electronic Unit
Instructions
DEHC.PI.100.H__.02
“__” = version number (changes)
Page 14
Quick Start Guide BD Controller 101N07xx Series 24 V DC
DEHC.PS.100.J1.02/520N1064 Produced by Danfoss Compressors, DEHC6093, 08.2010
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already
on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved
Danfoss Household Compressors GmbH • Mads-Clausen-Str. 7 • D-24939 Flensburg / Germany • Tel: +49 (0461) 4941-0 • compressors.danfoss.com
Loading...