Danfoss 080Z2167 Installation guide
Installation Guide
080Z2167
Humidity Transducer
Identication
The 080Z2167 measures outdoor relative humidity. The
080Z2167 does not include a mounting box but it will mount in
½” conduit knock out.
The 080Z2167 is compatible with all Danfoss AK255 controllers
as well as legacy controllers (AKC55, NC-25).
Specications
Size: 8.45” X 0.7”
Power requirement: 12 Vdc supplied by the I/O board
Operating environment: Humidity: 0 to 100% RH,
Ambient
temperature:
RH Output: 0-5Vdc
non-condensing
-40°F to 122°F
Installation and Inspection
The 080Z2167 should be mounted in a sheltered outdoor
location, preferably out of direct sunlight. The probe must
point downward when suspended from conduit. Note that the
080Z2167 must be unpowered when installing a new sensor
or it will continuously read 100%. Interrupt sensor power to
restart.
Ordering
Description
Humidity Transducer 080Z2167
Part #:
Danfoss Inc.
ELECTRONIC DIVISION
Baltimore, MD
© Copyright Danfoss | Produced by ADAP-KOOL® | 2015-06
Installation Guide | 080Z2167 Humidity transducer
RI8RS102 | 1
The Product contains electrical components
And may not be disposed together with domestic waste.
Equipment must be separate collected with Electrical and Electronic waste. According to Local and currently valid legislation.
© Copyright Danfoss | Produced by ADAP-KOOL® | 2015-06
Installation Guide | 080Z2167 Humidity transducer
RI8RS102 | 2
Loading...