Dako Artisan Link Pro User Manual

| Basic User Guide

Document Number D09665

Revision 01

July, 2012

For In Vitro Diagnostic Use

Corporate Headquarters Denmark

United States of America

Fax [phone]

Copyright© 2012 Dako North America, Inc. All rights reserved

This document may not be copied in whole or in part or reproduced in any other media without the
express written permission of Dako, Inc. Please note that under copyright law, copying includes
translation into another language.

The Artisan™ Link Special Stains System and its associated components and reagents are covered
under the following U.S. patents: 4,847,208; 5,073,504; 5,316,452; 5,645,114; 5,947,167; 6,092,695;
6,096,271; 6,180,061B1; 6,183,693B1; 6,244,474 B1; 6,465,207; 6,541,261; 6,783,733; 7,217,392.
Additional U.S. and foreign patents are pending.

Contact Dako

Tel. [phone]
Fax [phone]

Dako North America, Inc.
6392 Via Real
Carpinteria, CA 93013

Carpinteria, California

Tel [phone]

Dako Denmark A/S
Produktionsvej 42
2600 Glostrup

User Resources

For the latest information on Dako products and services, please visit the Dako website at:

http://www.dako.com

Installation Procedure

Dako employees will perform the initial installation and setup of all new Artisan™ instruments.

Scope

This guide contains information on advanced use and operation of the Artisan™ Link and assumes
you have received basic training on the instrument. Please contact our Technical Service Group or
refer to the Artisan™ Link Advanced User Guide for information not provided in this basic user guide.
This guide does not provide instructions for the installation or upgrade of software or hardware.

Disclaimers

This user guide is not a substitute for the detailed operator training provided by Dako, Inc., or for
other advanced instruction. Dako Technical Service Group should be contacted immediately for
assistance in the event of any instrument malfunction. Installation of hardware or software on your
Artisan™ Link should be performed only by a certified Dako Field Service Representative.

Updates of the operating system software, installation of antivirus software, patches etc. could
negatively affect, interfere, or corrupt the DakoLink software. The user should not attempt to make
changes without first contacting Dako Customer Service.

Trademarks

Artisan™ Link is a registered trademark of Dako North America, Inc. All other trade names and
trademarks are the property of their respective holders

.

ii Dako Artisan™ Link | Basic User Guide