Daikin REYQ144PTJU, REYQ72PTJU, REYQ168PTJU, REYQ192PTJU, REMQ72PTJU Engineering Data
...
EDUS 39-802A-R2_a
AMERICAS
AMERICAS
AMERICAS
REYQ_PTJU
3 phase
208-230V
60Hz
EDUS39-802A-R2_a
REYQ-P Heat Recovery (208-230V) 1
REYQ-P
(3φ 208-230V 60Hz)
Heat Recovery
1. Specifications .............................................................................................. 2
2. Dimensions .................................................................................................5
3. Service Space .............................................................................................8
4. Piping Diagrams..........................................................................................9
5. Wiring Diagrams........................................................................................13
6. Field Wiring ...............................................................................................17
7. Electric Characteristics..............................................................................19
8. Capacity Tables (Reference Data)............................................................21
8.1 Cooling Capacity (REYQ-PTJU) ................................................................ 21
8.2 Heating Capacity (REYQ-PTJU) ................................................................ 29
8.3 Capacity Correction Factor......................................................................... 45
9. Operation Limits ........................................................................................53
10.Sound Levels ............................................................................................54
11.Accessories...............................................................................................55
EDUS39-802A-R2_a
2 REYQ-P Heat Recovery (208-230V)
1. Specifications
Notes:
+1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), evel difference: 0 ft.
+2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), evel difference: 0 ft.
+3 Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of ambient conditions.
Model Name REYQ72PTJU REYQ96PTJU REYQ120PTJU
Power Supply 3 Phase 60Hz 208V-230V 3 Phase 60Hz 208V-230V 3 Phase 60Hz 208V-230V
+1 Cooling Capacity Btu / h 72,000 96,000 120,000
+2 Heating Capacity Btu / h 81,000 108,000 135,000
Casing Color Ivory White (5Y7.5/1) Ivory White (5Y7.5/1) Ivory White (5Y7.5/1)
Dimensions: (H×W×D) in (mm)
66-1/8 × 51-3/16 × 30-1/8”
(1680 x 1300.2 x 765 mm)
66-1/8 × 51-3/16 × 30-1/8”
(1680 x 1300.2 x 765 mm)
66-1/8 × 51-3/16 × 30-1/8”
(1680 x 1300.2 x 765 mm)
Heat Exchanger Cross Fin Coil Cross Fin Coil Cross Fin Coil
Comp.
Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type
Piston Displacement m
3
/h 7.88+10.53 13.34+10.53 13.34+10.53
Number of Revolutions r.p.m 3720, 2900 6300, 2900 6300, 2900
Motor Output×Number
of Units
kW (1.0+4.5) × 1 (2.2+4.5) × 1 (3.3+4.5) × 1
Starting Method Soft Start Soft Start Soft Start
Fan
Type Propeller Fan Propeller Fan Propeller Fan
Motor Output kW (0.35) × 2 (0.35) × 2 (0.35) × 2
Air Flow Rate cfm 6,700 6,700 7,410
Drive Direct Drive Direct Drive Direct Drive
Connecting
Pipes
Liquid Pipe in (mm)
φ 3/8” (9.5 mm) C1220T
(Brazing Connection)
φ 3/8” (9.5 mm) C1220T
(Brazing Connection)
φ 1/2” (12.7 mm) C1220T
(Brazing Connection)
Suction Gas Pipe in (mm)
φ 3/4” (19.1 mm) C1220T
(Brazing Connection)
φ7/8” (22.2 mm) C1220T
(Brazing Connection)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
High and Low Pressure
Gas Pipe
in (mm)
φ5/8” (15.8 mm) C1220T
(Brazing Connection)
φ 3/4” (19.1 mm) C1220T
(Brazing Connection)
φ 3/4” (19.1 mm) C1220T
(Brazing Connection)
Mass Lbs (kg) 730 (331 kg) 730 (331 kg) 730 (331 kg)
+3 Sound Level (Reference Value) dBA 58 58 60
Safety Devices
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
Defrost Method Deicer Deicer Deicer
Capacity Control % 20~100 14~100 14~100
Refrigerant
Refrigerant Name R-410A R-410A R-410A
Charge Lbs 22.7 23.4 23.8
Control Electronic Expansion Valve Electronic Expansion Valve Electronic Expansion Valve
Standard Accessories
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Drawing No. 4D058609 4D058610 4D058611
EDUS39-802A-R2 Specifications
REYQ-P Heat Recovery (208-230V) 3
Notes:
+1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), level difference: 0 ft.
+2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), level difference: 0 ft.
+3 BHFP26P90U is necessary for the connection.
Concerning about the piping connection for each outdoor unit to the main line as shown above, use REFNET.
+4 Anechoic chamber conversion value, measured under JISB8616 conditions. During actual operation,
these values are normally somewhat higher as a result of ambient conditions.
Model Name (Combination Unit) REYQ144PTJU REYQ168PTJU REYQ192PTJU
Model Name (Independent Unit) —
REMQ72PTJU
REMQ96PTJU
REMQ72PTJU
REMQ120PTJU
Power Supply 3 Phase 60Hz 208V-230V 3 Phase 60Hz 208V-230V 3 Phase 60Hz 208V-230V
+1 Cooling Capacity Btu / h 144,000 168,000 192,000
+2 Heating Capacity Btu / h 162,000 189,000 216,000
Casing Color Ivory White (5Y7.5/1) Ivory White (5Y7.5/1) Ivory White (5Y7.5/1)
Dimensions: (H×W×D) in (mm)
66-1/8 × 51-3/16 × 30-1/8”
(1680 x 1300 x 765 mm)
66-1/8 × 36-5/8 × 30-1/8”
(1680 x 930 x 765 mm) +
66-1/8 × 36-5/8 × 30-1/8”
(1680 x 930 x 765 mm)
66-1/8 × 36-5/8 × 30-1/8”
(1680 x 930 x 765 mm) +
66-1/8 × 36-5/8 × 30-1/8”
(1680 x 930 x 765 mm)
Heat Exchanger Cross Fin Coil Cross Fin Coil Cross Fin Coil
Comp.
Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type
Piston Displacement m
3
/h 16.90+16.90 16.90 + (10.53+13.34) 16.90 + (10.53+13.34)
Number of Revolutions r.p.m 7980, 7980 7980, (2900, 6300) 7980, (2900, 6300)
Motor Output×Number
of Units
kW (3.8+3.8) x 1 (4.7) × 1 + (2.2+4.5) × 1 (4.7) × 1 + (3.5+4.5) × 1
Starting Method Direct on Line Soft Start Soft Start
Fan
Type Propeller Fan Propeller Fan Propeller Fan
Motor Output kW 0.75 × 2 (0.75) × 1 + (0.75) × 1 (0.75) × 1 + (0.75) × 1
Air Flow Rate cfm 8,299 6,350+6,530 6,350+7,060
Drive Direct Drive Direct Drive3 Direct Drive
Connecting
Pipes
Liquid Pipe in (mm)
φ1/2” (12.7 mm) C1220T
(Brazing Connection)
φ5/8” (15.9 mm) C1220T
(Brazing Connection)
φ5/8” (15.9 mm) C1220T
(Brazing Connection)
Suction Gas Pipe in (mm)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
High and Low
Pressure Gas Pipe
in (mm)
φ 7/8” (22.2 mm) C1220T
(Brazing Connection)
φ 7/8” (22.2 mm) C1220T
(Brazing Connection)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
Pressure Equalizer
Tube
in (mm) —
φ 3/4” (19.1 mm) C1220T
(Brazing Connection)
φ 3/4” (19.1 mm) C1220T
(Brazing Connection)
Mass Lbs (kg) 747 lbs (229 kg) 450+560 lbs (204 + 254 kg) 450+560 lbs (204 + 254 kg)
+4 Sound Level (Reference Value) dBA 61 — —
Safety Devices
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
Defrost Method Deicer Deicer Deicer
Capacity Control % 10~100 9~100 7~100
Refrigerant
Refrigerant Name R-410A R-410A R-410A
Charge Lbs 24.5 18.1+19.8 18.1+20.1
Control Electronic Expansion Valve Electronic Expansion Valve Electronic Expansion Valve
Standard Accessories
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Drawing No. 4D058612 4D060122 4D060123
+3
+3
+3
+3
+3
+3
EDUS39-802A-R2_a
4 REYQ-P Heat Recovery (208-230V)
Notes:
+1 Indoor temp. : 80°FDB or 67°FWB / outdoor temp. : 95°FDB / Equivalent piping length : 25 ft (7.5 m), evel difference: 0 ft.
+2 Indoor temp. : 70°FDB / outdoor temp. : 47°FDB or 43°FWB / Equivalent piping length : 25 ft (7.5 m), evel difference: 0 ft.
+3 BHFP26P90U is necessary for the connection.
Concerning about the piping connection for each outdoor unit to the main line as shown above, use REFNET.
Model Name (Combination Unit) REYQ216PTJU REYQ240PTJU
Model Name (Independent Unit)
REMQ96PTJU
REMQ120PTJU
REMQ120PTJU
REMQ120PTJU
Power Supply 3 Phase 60Hz 208V-230V 3 Phase 60Hz 208V-230V
+1 Cooling Capacity Btu / h 216,000 240,000
+2 Heating Capacity Btu / h 243,000 270,000
Casing Color Ivory White (5Y7.5/1) Ivory White (5Y7.5/1)
Dimensions: (H×W×D) in (mm)
66-1/8 × 36-5/8 × 30-1/8” (1680 x 930 x 765 mm) +
66-1/8 × 36-5/8 × 30-1/8” (1680 x 930 x 765 mm)
66-1/8 × 36-5/8 × 30-1/8” (1680 x 930 x 765 mm) +
66-1/8 × 36-5/8 × 30-1/8” (1680 x 930 x 765 mm)
Heat Exchanger Cross Fin Coil Cross Fin Coil
Comp.
Type Hermetically Sealed Scroll Type Hermetically Sealed Scroll Type
Piston Displacement m
3
/h (10.53+13.34) × 2 (10.53+13.34) × 2
Number of Revolutions r.p.m (2900, 6300) × 2 (2900, 6300) × 2
Motor Output×Number
of Units
kW (2.2+4.5) × 1 + (3.5+4.5) × 1 (3.5+4.5) × 2
Starting Method Soft Start Soft Start
Fan
Type Propeller Fan Propeller Fan
Motor Output kW (0.75) × 1 + (0.75) × 1 (0.75) × 1 + (0.75) × 1
Air Flow Rate cfm 6,530+7,060 7,060+7,060
Drive Direct Drive Direct Drive
Connecting
Pipes
Liquid Pipe +3 in (mm)
φ5/8” (15.9 mm) C1220T
(Brazing Connection)
φ5/8” (15.9 mm) C1220T
(Brazing Connection)
Suction Gas Pipe +3 in (mm)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
φ1-3/8” (34.9 mm) C1220T
(Brazing Connection)
High and Low Pressure
Gas Pipe +3
in (mm)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
φ 1-1/8” (28.6 mm) C1220T
(Brazing Connection)
Pressure Equalizer
Tube
in (mm)
φ 3/4” ( 19.1 mm) C1220T
(Brazing Connection)
φ 3/4” (19.1 mm) C1220T
(Brazing Connection)
Mass Lbs (kg) 560+560 lbs (254 + 254 kg) 560+560 lbs (254 + 254 kg)
Safety Devices
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
High Pressure Switch,
Fan Driver Overload Protector,
Overcurrent Relay,
Inverter Overload Protector
Defrost Method Deicer Deicer
Capacity Control % 7~100 6~100
Refrigerant
Refrigerant Name R-410A R-410A
Charge Lbs 19.8+20.1 20.1+20.1
Control Electronic Expansion Valve Electronic Expansion Valve
Standard Accessories
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Installation Manual,
Operation Manual,
Connection Pipes, Clamps
Drawing No. 4D060124 4D060125
EDUS39-802A-R2 Dimensions
REYQ-P Heat Recovery (208-230V) 5
2. Dimensions
REYQ72, 96, 120, 144PTJU
[DETAIL FOR FRONT SIDE]
[DETAIL FOR BOTTOM SIDE]
*8-1/16
*9-1/2
*6-3/4
*7-7/8
*6-1/4
*2-13/16
*6-3/8
*8-5/16
*1
5-1/16
*6-9/16
*4-15/16
1-1/4
*1-7/16
*6-5/8
(Knock-out hole)
(Pitch of foundation bolt holes)
(Knock-out hole)
(Pitch of foundation bolt holes)
7-3/4
51-3/16
8-7/8
28-7/16~29
3-15/16
40-15/16
5-1/16
6-15/16
2-3/4
5-1/16
45°
5-11/16
45-3/4
66-1/8
(Foundation bolt hole)
4-9/16 × 7/8 Oblong holes
6-5/16
2-5/8 2-5/8
61-13/16
30-1/8
Notes)
1. For piping connection method (front and bottom sides), see the
installation manual.
2. High and low pressure gas pipe
φ 5/8 Brazing connection
...
REYQ72P
φ 3/4 Brazing connection
...
REYQ96, 120P
φ 7/8 Brazing connection
...
REYQ144PT
Gas pipe
φ 1-1/8 Brazing connection
...
RXYQ72PT
Suction gas pipe
φ 3/4 Brazing connection
...
REYQ72P
φ 7/8 Brazing connection
...
REYQ96P
φ 1-1/8 Brazing connection
...
REYQ120, 144PT
Liquid pipe
φ 3/8 Brazing connection
...
REYQ72, 96P
φ 1/2 Brazing connection
...
REYQ120, 144PT, RXYQ144PT
3. *shows the dimensions after fixing the accessory pipes.
7654321
No.
Pipe routing hole (bottom)
Pipe routing hole (front)
Power cord routing hole (front)
Grounding terminal
High and low pressure gas pipe connection port
Suction gas pipe connection port
Liquid pipe connection port
Parts name
See note 1.
See note 1.
φ 7/8
Inside of el. compo. box (M8)
See note 2.
See note 2.
See note 2.
Remarks
3D058618A
EDUS39-802A-R2_a
6 REYQ-P Heat Recovery (208-230V)
REMQ72, 96, 120PTJU
3
7
See note 2.
(Knock-out hole)
Suction gas pipe connection port
Power cord routing hole (front)
Pipe routing hole (bottom)
1
Liquid pipe connection port
Grounding terminal
(Pitch of foundation bolt holes)
Remarks
4
High and low pressure gas pipe connection port
9
(Pitch of foundation bolt holes)
2
See note 2.
5
φ 3/4 Brazing connection
8
Pressure equalizer pipe connection port
(Knock-out hole)
6
Parts name
See note 2.
No.
Pipe routing hole (front)
Pipe routing hole (bottom)
(Knock-out hole)
:
Pressure equalizer
pipe only.
6-5/16
6-15/16
45°
61-13/16
2-5/8
5-1/4
*7-13/16
*1-15/16
*5-13/16
*2-9/16
*6
*6-5/16
*1-7/8
*7-5/8
*9-1/2
[DETAIL FOR FRONT SIDE]
*1-15/16
*10-1/16
*7-1/8
6-5/16
2-3/4
8-7/8
31-3/16
*4-3/16
*2-11/16
*9-1/2
*4-7/16
*1-7/8
*11-1/16
*5-7/8
*4-7/16
*7-5/8
*13/16
[DETAIL FOR BOTTOM SIDE]
*7-13/16
8-7/16
66-1/8
3-15/16
29-3/8
7
26-3/8
28-7/16~29
5-1/16
36-5/8
4-9/16 × 7/8 Oblong holes
(Foundation bolt hole)
30-1/8
2-5/8
*6-1/8
Notes)
1. For piping connection method (front and bottom sides),
see the installation manual.
2. High and low pressure gas pipe
φ 3/4 Brazing connection
...
REMQ72P
φ 3/4 Brazing connection
...
REMQ96, 120P
Suction gas pipe
φ 3/4 Brazing connection
...
REMQ72P
φ 7/8 Brazing connection
...
REMQ96P
φ 1-1/8 Brazing connection
...
REMQ120P
Liquid pipe
φ 3/8 Brazing connection
...
REMQ72, 96P
φ 1/2 Brazing connection
...
REMQ120P
φ 1-15/16 See note 1.
See note 1.
See note 1.
φ 7/8
Inside of el. compo. box (M8)
3D058617
EDUS39-802A-R2 Dimensions
REYQ-P Heat Recovery (208-230V) 7
REYQ168, 192, 216, 240PTJU
Model Name
or more
Outdoor Unit 1
19-11/16
11-13/16 or more
< Suction side >
(Foundation bolt hole)
19-11/16 or more
59-1/16 h 2
< Front >
(Pitch of foundation
bolt holes)
(Pitch of foundation
bolt holes)
(Pitch of foundation
bolt holes)
Drawing No.
(Foundation bolt hole)
Outdoor Unit 2
Drawing No.
(Front)
3D058616
3D058616
3D058616
3D058617
3D058616
3D058617
3D058617
3D058617
3D058617
3D058617
3D058616
3D058616
3D058616
3D058616
3D058617
3D058617
3D058616
3D058617
RXYQ72PTJU
RXYQ96PYDN
REMQ120PYDN
REMQ72PTJU
REMQ120PTJU
RXYQ72PYDN
RXYQ120PYDN
RXYQ96PTJU
REMQ72PYDN
RXYQ72PTJU
REMQ96PYDN
REMQ72PTJU
RXYQ72PYDN
REMQ72PYDN
RXYQ120PTJU
REMQ72PYDN
RXYQ72PYDN
REMQ96PTJU
h 1
REMQ120PYDN
RXYQ120PTJU
RXYQ120PYDN
REMQ120PTJU
RXYQ72PYDN
RXYQ120PYDN
REMQ120PTJU
RXYQ120PTJU
RXYQ120PTJU
REMQ120PYDN
RXYQ96PYDN
REMQ72PYDN
REMQ96PTJU
REMQ96PYDN
REMQ120PYDN
RXYQ96PTJU
REMQ120PTJU
RXYQ120PYDN
REYQ216PYDN
REYQ240PTJU
RXYQ216PTJU
RXYQ168PTJU
REYQ168PYDN
RXYQ192PYDN
REYQ216PTJU
REYQ144PYDN
RXYQ192PTJU
REYQ192PYDN
REYQ240PYDN
RXYQ144PYDN
REYQ168PTJU
RXYQ240PYDN
RXYQ240PTJU
RXYQ168PYDN
REYQ192PTJU
RXYQ216PYDN
3D058616
3D058616
3D058616
3D058616
3D058616
3D058616
3D058616
3D058616
3D058616
3D058617
3D058617
3D058617
3D058617
3D058617
3D058617
3D058617
3D058617
3D058617
4-19/32×7/8-mm-Oblong holes
30-1/8
Outdoor Unit 1
36-5/8
25/32 or more
Outdoor Unit 2
25/32
66-1/8
31-3/16
Notes :
1. Heights of walls
Front : 59-1/16in
Suction side : 19-11/16in
Side : Height unrestricted
The installation space shown in this figure is based on the condition of cooling operation at the outdoor
air temperature of 95˚F.
The installation space of suction side shown above must be expanded in the following case.
· Design outdoor temperature becomes over 95˚F.
· Operating over Max. operating load (In case of causing a heavy heating load at indoor unit side)
2. If the above wall heights are exceeded then h2/2 and h1/2 should be added to the
front and suction side service spaces respectively as shown in the following figure.
3. When installing the units the most appropriate pattern should be selected from those shown above
in order to obtain the best fit in the space available always bearing in mind the need to leave enough room
for a parson to pass between units and wall and for the air to circulate freely.
(If more units are to be installed than are catered for in the above patterns your layout should take account
of the possibility of short circuits. )
4. The units should be installed to leave sufficient space at the front for the on site refrigerant piping work
to be carried out comfortably.
36-5/8
13/32 or more
28-7/16 ~ 29-1/32
4-19/32 × 7/8-mm-Oblong holes
31-3/16
13/32 or more
3D059677
EDUS39-802A-R2_a
8 REYQ-P Heat Recovery (208-230V)
3. Service Space
REYQ72, 96, 120, 144, 168, 192, 216, 240PTJU
3D058620
EDUS39-802A-R2 Piping Diagrams
REYQ-P Heat Recovery (208-230V) 9
4. Piping Diagrams
REYQ72, 96, 120PTJU
3D058639A
EDUS39-802A-R2_a
10 REYQ-P Heat Recovery (208-230V)
REYQ144PTJU
3D058640
EDUS39-802A-R2 Piping Diagrams
REYQ-P Heat Recovery (208-230V) 11
REMQ72PTJU
3D058637A
EDUS39-802A-R2_a
12 REYQ-P Heat Recovery (208-230V)
REMQ96, 120PTJU
3D058638A
EDUS39-802A-R2 Wiring Diagrams
REYQ-P Heat Recovery (208-230V) 13
5. Wiring Diagrams
REYQ72, 96, 120PTJU
N=2Z4C
BS4
NOTE) 4
RED
M
Y3S
NOTE) 4
X5A
A2
K11R
X4A
BLU
F1U
R4T
A2P
A6P
P<
K11R
K1M
X3A
X2A
GRE
X9A
K2R
RED
WHT
BS2
208-230V 3~60Hz
5
K4R
R502
X16A
X1M
K3R
R14T
A4P
X8A
A6P
5
X28A
X2A
(BACK)
X3A
X1M
U
X31A
-
Q1RP
X6A
t˚
Z1C
N=4
5
TO
OUT/D UNIT
5
Y3E
F2
X21A
P1
3
BLU
K5R
5
X30A
t˚
K1R
BLK
WHT
X1A
X26A
X20A
t˚
M
M
H6P
U
V2R
BLK
H7P
t˚
X4A
H8P
L1R
X3A
K2M
M1C
LAYOUT OF M1C, M2C, M1F, M2F
F1U
P2
R10T
Y4S
R9T
M
K2M
BLK
V1CP
X15A
L1
Y10S
E2HC
X5A
Q1RP
X7A
P3
X37A
H1P
M1F
WHT
+
K7R
BLU
t˚
F1U
L3
X7A
K5R
R6T
X1M
K2M
t˚
5
K5R
WHT
Y6S
A5P
TO
MULTI UNIT
TO
MULTI UNITTOIN/D UNIT
A4P
WHT
X23A
X15A
RED
X29A
X8A
A3P
Y1E
M2F
X1A
R1T
Y4E
X7A
X3A
BLK
X1A
H4P
NOTE) 5
Y2S
X9A
HAP
WHT
F1
F2U
BLK
Y8S
H5P
t˚
BLK
V1R
R8T
S2NPL
X9A
X6A
RED
S1PH
R1
X1A
R2
R32T
X1A
outdoor
(F1)(F2)
WHT
RED
BLK
WHT
P<
F1U
Q1
S2PH
V
N3
F1
X11A
X7A
M2C
L1
K2M
X9A
M
3~
BLU
F1U
X3A
K3R
MS
3~
MS
3~
MS
3~
Y9S
RED
BLU
TERMINAL
OF M1C, M2C
X9A
HAP
A1
EL. COMPO. BOX(2)
A7P
A1P
Q2
t˚
T2A
N=1
5
HAP
F2
X8A
X22A
X2A
X1M
Z6C
N=4
L2
X1M
H3P
X4A
L2
+
t˚
R11T
RED
t˚
R12T
WHT
K84R
BLU
BS3
X21A
1
BLK
X37A
BS5
M
H2P
X5A
X3A
X4A
V1R
WHT
T1A
POWER SUPPLY
+
R15T
t˚
R13T
K8R
RED
BLU
WHT
(FRONT)
R1T
A5P
A7P
Y5E
indoor
(F1)(F2)
V
+
NOTE) 4
t˚
BS1
R7T
-
X12A
X18A
F2U
6
A2P
X2A
X1A
S1NPH
6
Y1S
t˚
X2A
E1HC
X10A
Q1
X18A
L1R
X30A
W
t˚
X15A
RED
X29A
X11A
642
X4A
X5A
EL. COMPO. BOX (1)
RED
BLU
RED
K1M
K8R
K6R
K5R
K5R
K3R
L1R
K4R
K11R
K5R
K84R
K11R
K7R
K3R
M1C, M2C
K2M
K1R
K2M
K2R
K1R
X1M
A3P
A1P
CONNECTOR FOR OPTIONAL PARTS
X7A
X9A
X37A
X6A
REDRED
R112
BLU
R2T
N=3Z3C
5
L3
ELECTRONIC EXPANSION VALVE (MAIN 2) (A3P)
THERMISTOR (SUB COOL HEAT EXC. GAS 2) (A3P)
SAFETY DEVICES INPUT (A1P) (A3P)
CURRENT SENSOR (A6P)
TERMINAL STRIP (POWER SUPPLY)
PRESSURE SWITCH (HIGH) (A3P)
CONNECTOR
ELECTRONIC EXPANSION VALVE (MAIN 1) (A1P)
CURRENT SENSOR (A7P)
PRESSURE SENSOR (LOW) (A1P)
POWER MODULE (A5P)
PRESSURE SENSOR (HIGH) (A1P)
POWER MODULE (A4P)
THERMISTOR (LIQUID 2) (A3P)
ELECTRONIC EXPANSION VALVE (SUBCOOL 1) (A1P)
PRESSURE SWITCH (HIGH) (A1P)
THERMISTOR (HEAT EXC. DEICER 2) (A3P)
THERMISTOR (HEAT EXC.LIQUID 2) (A3P)
TERMINAL STRIP (CONTROL) (A1P) (A3P)
DIODE BRIDGE (A4P)
SOLENOID VALVE (RMTO) (A2P)
SOLENOID VALVE (EV BYPASS 1) (A2P)
SOLENOID VALVE (RMTL) (A1P)
NOISE FILTER (WITH SURGE ABSORBER) (A4P)
SOLENOID VALVE (RMTT) (A2P)
ELECTRONIC EXPANSION VALVE (CHARGE) (A3P)
SOLENOID VALVE (HOT GAS) (A2P)
SOLENOID VALVE (RMTG) (A1P)
SOLENOID VALVE (EV BYPASS 2) (A3P)
SOLENOID VALVE (4 WAY VALVE) (PIPE) (A3P)
ELECTRONIC EXPANSION VALVE (SUBCOOL 2) (A3P)
SOLENOID VALVE (4 WAY VALVE) (HEAT EXC. 2) (A3P)
NOISE FILTER (FERRITE CORE)
SOLENOID VALVE (4 WAY VALVE) (HEAT EXC. 1) (A1P)
POWER SUPPLY (ADAPTOR) (A3P)
POWER SUPPLY (ADAPTOR) (A2P)
OPERATION OUTPUT (A2P)
X23A
Y2E
R31T
-
X12A
V1CP
X3A
X4A
V3R
WHT
t˚
t˚
X32A
X4A
WHT
X1A
Y5S
K1R
X5A
t˚
C1
Q2
MAGNETIC RELAY (M2C)
MAGNETIC RELAY (Y1S) (A1P)
MAGNETIC RELAY (Y9S) (A3P)
MAGNETIC RELAY (E2HC) (A3P)
MAGNETIC RELAY (Y3S) (A1P)
MAGNETIC RELAY (K2M) (A3P)
MAGNETIC RELAY (Y2S) (A1P)
MAGNETIC RELAY (Y4S) (A2P)
MAGNETIC RELAY (E1HC) (A1P)
MAGNETIC RELAY (Y6S) (A2P)
MAGNETIC RELAY (A4P)
MAGNETIC CONTACTOR (M1C) (A4P)
MOTOR (COMPRESSOR)
MAGNETIC RELAY (FOR OPTION) (A2P)
MAGNETIC RELAY (Y7S) (A2P)
MAGNETIC RELAY (CURRENT LIMITING) (A4P)
MAGNETIC RELAY (Y5S) (A2P)
MAGNETIC RELAY (Y10S) (A3P)
MAGNETIC RELAY (Y8S) (A3P)
REACTOR
X8A
K6R
F1U
E1HC
F1U, F2U
F1U
E2HC
C1
BS1~5
HAP
A6P
A3P
A7P
A5P
A1P
A2P
A4P
H1P~8P
R5T
Y7S
X7A
PHASE REVERSAL DETECT CIRCUIT (A1P) (A3P)
THERMISTOR (FIN) (A4P)
MOTOR (FAN)
THERMISTOR (LIQUID 1) (A2P)
THERMISTOR (HEAT EXC. GAS 1) (A1P)
RESISTOR (CURRENT LIMITING) (A4P)
SWITCHING POWER SUPPLY (A1P, A3P, A4P)
RESISTOR (CURRENT SENSOR) (A4P)
THERMISTOR (SUB COOL HEAT EXC. GAS 1) (A1P)
RESISTOR (CURRENT SENSOR) (A4P)
THERMISTOR (AIR) (A1P)
THERMISTOR (HEAT EXC. LIQUID 1) (A1P)
THERMISTOR (SUB COOL HEATE XC.LIQUID 1) (A1P)
THERMISTOR (HEAT EXC. DEICER 1) (A1P)
THERMISTOR (M1C DISCHARGE) (A1P)
THERMISTOR (SUCTION 2) (A3P)
THERMISTOR (M2C DISCHARGE) (A3P)
THERMISTOR (SUCTION 1) (A2P)
RESISTOR (CURRENT SENSOR) (A5P)
THERMISTOR (HEAT EXC. GAS 2) (A3P)
W
R32T
R31T
R4T
R8T
R502
Q1RP
R1
M1F, M2F
R1T
R5T
R7T
R6T
R2T
R2
PS
R11T
R10T
R1T
R9T
R112
WHT
PRINTED CIRCUIT BOARD (MAIN)
PRINTED CIRCUIT BOARD (SUB)
PRINTED CIRCUIT BOARD (INV, FAN)
PILOT LAMP (SERVICE MONITOR : ORANGE) (A1P)
[H2P] PREPARE, TEST-------------------FLICKERING
MALFUNCTION DETECTION---LIGHT UP
PRINTED CIRCUIT BOARD (CURRENT SENSOR)
PRINTED CIRCUIT BOARD (ELB)
FUSE (16A, DC450V) (A4P) (A5P)
PRINTED CIRCUIT BOARD (FAN)
FUSE (T, 3.15A, 250V) (A2P)
CAPACITOR
CRANKCASE HEATER (A1P)
FUSE (T, 3.15A, 250V) (A1P) (A3P)
PRINTED CIRCUIT BOARD (MAIN)
CRANKCASE HEATER (A3P)
PUSH BUTTON SWITCH
(MODE, SET, RETURN, TEST, RESET) (A1P)
PILOT LAMP (SERVICE MONITOR-GREEN) (A1P) (A2P) (A3P)
Y3S
Y6S
Y4E
Y5E
Y1S
Y8S
Y10S
Z1C~6C
Y9S
Y5S
Y2S
Y7S
Z1F
Y4S
S1NPH
V2R, V3R
Y3E
V1R
V1CP
R14T
T1A
S1PH
S2NPL
X1M
V1R
Y1E
R12T
R15T
X1A~X9A
S2PH
X1M
Y2E
T2A
R13T
L3A
X504A
X5A
X501A
1 1
P1
X2A
Z1F
PS
X1A
1 1
N1
E1
X502A
L1A
M2F
THIS DWG.
M1F
M2C
BOX (2)
BOX (1)
M1C
CASING
Z5C
L2A
Z2C
U
W
V
U
VW
PS
PS
NOTES)
1. THIS WIRING DIAGRAM IS APPLIED ONLY TO THE
OUTDOOR UNIT.
2. : FIELD WIRING.
3. : TERMINAL STRIP : CONNECTOR : TERMINAL
: PROTECTIVE EARTH (SCREW)
4. WHEN USING THE OPTIONAL ADAPTOR, REFER TO THE
INSTALLATION MANUAL OF THE OPTIONAL ADAPTOR.
5. FOR CONNECTION WIRING TO INDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-MULTI
TRANSMISSION Q1 · Q2, REFER TO THE INSTALLATION
MANUAL.
6. HOW TO USE BS1~5 AND DS1 · 2 SWITCH, REFER TO
"SERVICE PRECAUTION" LABEL ON EL. COMPO. BOX
COVER.
7. WHEN OPERATING, DON' T SHORTCIRCUIT THE
PROTECTION DEVICE (S1, 2PH).
8. , , SYMBOLS INDICATE COLORS OF EACH
PARTS AS SHOWN BELOW.
: IS CONNECTOR COLOR FOR PRINTED CIRCUIT
BOARD.
: IS CONNECTOR COLOR FOR COMPONENT.
: IS IDENTIFICATION COLOR FOR COMPONENT
LEAD WIRE.
9. COLORS BLK : BLACK RED : RED BLU : BLUE
WHT : WHITE.
*
*
*
*
*
*
***
3D058533D
EDUS39-802A-R2_a
14 REYQ-P Heat Recovery (208-230V)
REYQ144PTJU
X1A
X3A
F1U
A6P
X5A
X6A
L3A
X6A
K3R
A2P
Y2E
R2T
BLU
Q1
R502
(BACK)
M1C
Y3E
TERMINAL
OF M1C, M2C
BS3
(FRONT)
A2P
X5A
L2
M
L3
Z2C
X2A
C1
Y7S
-
BLU
L2A
X2A
Z5C
X37A
A5P
BLK
C1
M
X1M
6
K2M
A1P
X8A
K4R
Y6S
Z1C
N=4
BLK
P2
M
K5R
5
V
E1
S2PH
X4A
S2NPL
X501A
5
H4P
K1R
X3A
-
R1
M1F
Y8S
V1CP
K5R
X4A
R31T
R1T
RED
MS3~MS
3~
MS3~MS
3~
H1P
RED
R6T
X8A
TO
OUT/D UNIT
Q2
(BACK)
BS4
X5A
X11A
X6A
X4A
X2A
V2R
X2A
EL. COMPO. BOX (1)
X15A
Y2S
L1A
EL. COMPO. BOX (2)
t˚ t˚ t˚ t˚ t˚ t˚
t˚
F1U
X1M
POWER SUPPLY
5
R5T
Q1
X1A
t˚
X21A
X9A
R7T
X32A
X28A
Q2
K2R
BLU
X37A
+
A2
H2P
X4A
X20A
X1A
NOTE) 5
M
K1M
X9A
X7A
X501A
V1R
W
5
R10T
BS1
R15T
X8A
HAP
F1U
H6P
R1
K6R
Y5E
Y3S
A5P
L3
R1T
X20A
+
t˚
P<
outdoor
(F1) (F2)
P2
X23A
Y1S
X11A
X30A
Z4C
N=4
X1A
E1HC
R1T
R11T
A1P
Z3C
N=3
M2C
WHT
WHT
X29A
F1
X23A
indoor
(F1) (F2)
U
S1NPH
X2M
A4P
A3P
R12T
X2A
X15A
BLU
Y4E
RED
t˚
U
A3P
L1R
V2R
F1
BLK
L2
+
5
K1M
L1
X3A
R32T
5
X7A
Z6C
N=3
+
L3A
F1U
BLU
TO
MULTI UNIT
TO
MULTI UNIT
L2A
K3R
Y1E
A1
HAP
X29A
X7A
L1
X1M
BLK
WHT
RED
L3
BS5
X1M
X3A
X6A
L2R
X8A
WHT
BLK
F2
X28A
H5P
X21A
NOTE) 4
X7A
RED
X4A
NOTE) 4
R8T
V1CP
X9A
V3R
X9A
K84R
K2M
M2F
t˚
X5A
Y9S
R9T
X7A
X1M
L1A
-
5
X1M
P<
V
WHT
HAP
GRE
Y10S
BLK
X10A
X4A
M
K2M
R13T
F2
L2R
T2A
N=1
X16A
X3A
WHT
NOTE) 4
+
X2M
K7R
V
U
BLK
WHT
RED
W
V
U
BLK
WHT
RED
W
P1
E1
X9A
V3R
X30A
K7R
GRE
W
BLU
WHT
BLU
WHT
BLU
H7P
X502A
A6P
H8P
X22A
RED
R112
BLU
H3P
X15A
K1M, K2M
A4P, A5P
A6P
A2P
HAP
F1U
F1U
F1U, F2U
H1P~8P
BS1~5
K1R
E1HC, E2HC
C1
A1P
A3P
X18A
WHT
-
X7A
X1A
K6R
K2R
K7R
K3R
Q1RP
K5R
K5R
K5R
K11R
M1F, M2F
PS
M1C, M2C
K7R
K4R
K11R
K3R
L1R, L2R
R14T
208-230V 3~60Hz
F2U
K5R
+
Y4S
WHT
BLU
RED
X31A
BLK
R112
E2HC
R4T
L1R
L2
S1PH
X12A
X4A
Q1RP
K84R
Q1RP
K11R
TO
IN/D UNIT
F1U
X502A
R14T
R10T
R1T
R11T
R2T
R112, R502
R1T
R32T
R31T
R8T
R9T
R1
R4T
R7T
R5T
R12T
R13T
X3A
P1
R502
K1R
L1
Y5S
X1A
t˚ t˚ t˚ t˚ t˚ t˚ t˚
WHT
(FRONT)
RED
X11A
X18A
V1R
6
K11R
BS2
PUSH BUTTON SWITCH
(MODE, SET, RETURN, TEST, RESET)
CRANKCASE HEATER (A1P) (A3P)
PRINTED CIRCUIT BOARD (SUB 1)
PRINTED CIRCUIT BOARD (INV)
CAPACITOR (A4P) (A5P)
PILOTLAMP (SERVICE MONITOR : ORANGE)
[H2P] PREPARE, TEST-------------------FLICKERING
MALFUNCTION DETECTION---LIGHT UP
MAGNETIC RELAY (Y4S) (A2P)
PILOT LAMP (SERVICE MONITOR-GREEN) (A1P, A2P, A3P)
MAGNETIC RELAY (M1C) (M2C) (A4P) (A5P)
FUSE (16A, DC450V) (A4P) (A5P)
FUSE (T, 3.15A, 250V) (A2P)
PRINTED CIRCUIT BOARD (MAIN)
PRINTED CIRCUIT BOARD (ELB)
FUSE (T, 3.15A, 250V) (A1P) (A3P)
PRINTED CIRCUIT BOARD (SUB 2)
MAGNETIC RELAY (Y3S) (A1P)
K84R MAGNETIC RELAY (CURRENT LIMITING) (A4P) (A5P)
MAGNETIC RELAY (FOR OPTION) (A2P)
MOTOR (FAN)
MAGNETIC RELAY (Y10S) (A3P)
MAGNETIC RELAY (E1HC) (A1P)
MAGNETIC RELAY (Y5S) (A2P)
MAGNETIC RELAY (Y8S) (A3P)
PHASE REVERSAL DETECT CIRCUIT (A1P) (A3P)
MOTOR (COMPRESSOR)
SWITCHING POWER SUPPLY (A1P, A3P, A4P, A5P)
MAGNETIC RELAY (Y2S) (A1P)
MAGNETIC RELAY (Y6S) (A2P)
MAGNETIC RELAY (Y1S) (A1P)
REACTOR (A4P) (A5P)
MAGNETIC RELAY (Y7S) (A2P)
MAGNETIC RELAY (E2HC) (A3P)
MAGNETIC RELAY (Y9S) (A3P)
F2U
RED
BLU
WHT
S2NPL
V1R
Y2E
Y1S
Y4E
Y1E
V2R, V3R
V1CP
X1M
Y3E
X1M
R15T
X1A~X9A
T2A
S1PH, S2PH
S1NPH
Y5E
X2M
A4P
Y9S
Y7S
Y6S
Y4S
X37A
Y2S
Y8S
Y5S
Y10S
Z1C~6C
X7A
CONNECTOR FOR OPTIONAL PARTS
Y3S
X9A
SOLENOID VALVE (EV BYPASS 1)
SOLENOID VALVE (4 WAY VALVE-HEAT EXC. 1)
SOLENOID VALVE (RMTT)
POWER SUPPLY (ADAPTER) (A3P)
POWER SUPPLY (ADAPTER) (A2P)
SOLENOID VALVE (RMTL)
SOLENOID VALVE (EV BYPASS 2)
SOLENOID VALVE (HOT GAS)
SOLENOID VALVE (4 WAY VALVE-PIPE)
SOLENOID VALVE (RMTO)
NOISE FILTER (FERRITE CORE)
OPERATION OUTPUT (A2P)
Z1F NOISE FILTER (WITH SURGE ABSORBER) (A4P) (A5P)
SOLENOID VALVE (4 WAY VALVE-HEAT EXC. 2)
THERMISTOR (M1C DISCHARGE) (A1P)
THERMISTOR (SUB COOL HEAT EXC. GAS 1)
THERMISTOR (FIN) (A4P) (A5P)
THERMISTOR (HEAT EXC. LIQUID 1) (A1P)
THERMISTOR (HEAT EXC. DEICER 2) (A3P)
THERMISTOR (HEAT EXC. GAS 2) (A3P)
THERMISTOR (SUCTION 1) (A2P)
THERMISTOR (M2C DISCHARGE) (A2P)
THERMISTOR (SUB COOL HEAT EXC. GAS 2)
R6T THERMISTOR (SUB COOL HEAT EXC. LIQUID) (A1P)
THERMISTOR (AIR) (A1P)
THERMISTOR (LIQUID 1) (A2P)
RESISTOR (CURRENT SENSOR) (A4P) (A5P)
THERMISTOR (LIQUID 2) (A3P)
THERMISTOR (HEAT EXC. GAS 1) (A1P)
THERMISTOR (HEAT EXC. DEICER 1) (A1P)
RESISTOR (A4P) (A5P)
THERMISTOR (SUCTION 2) (A3P)
PRESSURE SENSOR (HIGH) (A1P)
SOLENOID VALVE (RMTG)
PRESSURE SENSOR (LOW) (A1P)
POWER MODULE (A4P) (A5P)
ELECTRONIC EXPANSION VALVE (SUBCOOL 2)
ELECTRONIC EXPANSION VALVE (CHARGE)
ELECTRONIC EXPANSION VALVE (SUBCOOL 1)
TERMINAL STRIP (CONTROL) (A1P) (A3P)
ELECTRONIC EXPANSION VALVE (MAIN 1)
TERMINAL STRIP (RELAY)
ELECTRONIC EXPANSION VALVE (MAIN 2)
THERMISTOR (HEAT EXC. LIQUID 2) (A3P)
CONNECTOR
DIODE BRIDGE (A4P) (A5P)
TERMINAL STRIP (POWER SUPPLY)
PRESSURE SWITCH (HIGH) (A1P) (A3P)
SAFETY DEVICES INPUT (A1P) (A3P)
CURRENT SENSOR (A6P)
Z1F
W
U
V
CASING
BOX (1)
M1C
THIS DWG.
BOX (2)
M2C
M2F M1F
1
PS
Z1F
1 1
1
PS
PS
PS
LAYOUT OF M1C, M2C, M1F, M2F
NOTES)
1. THIS WIRING DIAGRAM IS APPLIED ONLY TO THE
OUTDOOR UNIT.
2. : FIELD WIRING.
3. : TERMINAL STRIP : CONNECTOR : TERMINAL
: PROTECTIVE EARTH (SCREW)
4. WHEN USING THE OPTIONAL ADAPTOR, REFER TO THE
INSTALLATION MANUAL OF THE OPTIONAL ADAPTOR.
5. FOR CONNECTION WIRING TO INDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-MULTI
TRANSMISSION Q1 · Q2, REFER TO THE INSTALLATION
MANUAL.
6. HOW TO USE BS1~5 AND DS1 · 2 SWITCH, REFER TO
"SERVICE PRECAUTION" LABEL ON EL. COMPO. BOX
COVER.
7. WHEN OPERATING, DON' T SHORTCIRCUIT THE
PROTECTION DEVICE (S1, 2PH).
8. , , SYMBOLS INDICATE COLORS OF EACH
PARTS AS SHOWN BELOW.
: IS CONNECTOR COLOR FOR PRINTED CIRCUIT
BOARD.
: IS CONNECTOR COLOR FOR COMPONENT.
: IS IDENTIFICATION COLOR FOR COMPONENT
LEAD WIRE.
9. COLORS BLK : BLACK RED : RED BLU : BLUE
WHT : WHITE.
*
*
*
*
*
*
***
3D060077A
EDUS39-802A-R2 Wiring Diagrams
REYQ-P Heat Recovery (208-230V) 15
REMQ72PTJU
C1
5
K2M
+
X4A
A2P
F2U
WHT
V1CP
-
F1U
A3P
BLU
+
X504A
C1
X7A
5
RED
-
X2A
X1A
A1P
V2R
A4P
+
X28A
L2
L3
X1M
L1
Z1F
PS
PS
POWER SUPPLY
208-230V 3~60Hz
L1L2L3
WHT
RED
BLU
T2A
N=1
GRNWHTRED BLU
L1A L3A E1L2A
K1M
X2A
X3A
X1A
K84R
R1
R1T
V1R
t˚
t˚ t˚
t˚ t˚ t˚ t˚ t˚ t˚
BLK
BLK
L1R
P1
P2
F1UR112
X6A
V3R
X4A
R502
X502A
X501A
UWV
UWV
Z1C
N=4
RED
BLK
WHT
X1A
Z2C
RED
BLK
WHT
MS
3~
MS
3~
M1FM1C
Z3C
N=3
R9TR8T
X16A
X12AX11A
NOTE) 4
Y5S
NOTE) 4
Y8S
Y6S
Y7S
X9A
X1A
F1U
X7A
X8A
X4A
X5A
X3A K1R
K5R
K3R
K6R
K2R
X20A
X37A
X10A
X15A
HAP
Q1RP
X3A
X2A
K11R
K5R
K3R
K4R
K7R
X7A X9AX8A X11A X15A
Y2S Y3SY1S
E1HC
Y4S
: * IS CONNECTOR COLOR FOR PRINTED CIRCUIT BOARD.
: * IS CONNECTOR COLOR FOR COMPONENT.
: * IS DISCRIMINATION COLOR FOR COMPONENT LEAD WIRE.
***
R31T R2T R6TR5T R7TR4T
X30AX29A
1 1
H1P H2P H3P H4P H5P H6P H7P H8P
BS1 BS2 BS3 BS4 BS5
HAP
Q2F1 F2
TO
IN/D
UNIT
TO
OUT/D
UNIT
F1
X1M
TO
MULTI
UNIT
NOTE) 5
Q1
outdoor
(Q1) (Q2)
outdoor
(F1) (F2)
indoor
(F1) (F2)
F2
X3A
S2NPL
X18A
Y1E
M
X31A
5
t˚
R1T
X21A
S1NPH
X32A
X23A
5
BLU
WHT WHT
M
BLU
Y3E Y2E
5
BLK
X22A
M
BLK
LAYOUT OF M1C, M2C, M1F
V
U
TERMINAL OF M1C, M2C
W
M1F
EL. COMPO. BOX
CASING
M1C
(FRONT)
X2A
(BACK)
X1A
A2P A1P
A3P
X1M
A4P
L1R
X3A
X1M
EL. COMPO. BOX
NOTES)
1. THIS WIRING DIAGRAM IS APPLIED ONLY TO THE
OUTDOOR UNIT.
2. : FIELD WIRING.
3. : TERMINAL STRIP : CONNECTOR : TERMINAL
: PROTECTIVE EARTH (SCREW)
4. WHEN USING THE OPTIONAL ADAPTOR, REFER TO THE
INSTALLATION MANUAL OF THE OPTIONAL ADAPTOR.
5. FOR CONNECTION WIRING TO INDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-MULTI
TRANSMISSION Q1 · Q2, REFER TO THE INSTALLATION
MANUAL.
6. HOW TO USE BS1~5, REFER TO "SERVICE PRECAUTION"
LABEL ON EL. COMPO. BOX COVER.
7. WHEN OPERATING, DON' T SHORTCIRCUIT THE
PROTECTION DEVICE (S1PH, S2PH).
8. COLORS BLK : BLACK RED : RED BLU : BLUE
WHT : WHITE GRN : GREEN.
CONNECTOR FOR OPTIONAL PARTS
R6T
R9T
R7T
S2NPL
S1PH
R5T
R31T
R4T
T2A
R2T
R8T
S1NPH
V2R, V3R
V1CP
X1M
X3A
X1A, X2A
V1R
X9A
X7A
PRESSURE SENSOR (HIGH) (A1P)
PRESSURE SWITCH (HIGH) (A1P)
THERMISTOR (LIQUID) (A2P)
THERMISTOR (HEAT EXC. DEICER) (A1P)
THERMISTOR (HEAT EXC. LIQUID) (A1P)
THERMISTOR (SUB COOL HEAT EXC. LIQUID) (A1P)
PRESSURE SENSOR (LOW) (A1P)
CURRENT SENSOR (A4P)
THERMISTOR (SUB COOL HEAT EXC. GAS) (A1P)
THERMISTOR (SUCTION) (A2P)
THERMISTOR (HEAT EXC. GAS) (A1P)
THERMISTOR (M1C, M2C DISCHARGE) (A1P)
SAFETY DEVICES INPUT (A1P)
CONNECTOR (Y1E)
POWER MODULE (A3P)
TERMINAL STRIP (POWER SUPPLY)
POWER MODULE (A3P)
CONNECTOR (M1F)
OPERATION OUTPUT (A2P)
POWER SUPPLY (ADAPTOR) (A2P)
Z1F
Y5S
Z1C~3C
Y1S
Y4S
Y1E
Y3S
Y7S
Y6S
Y2E
Y8S
X1M
Y3E
Y2S
NOISE FILTER (WITH SURGE ABSORBER) (A3P)
ELECTRONIC EXPANSION VALVE (CHARGE) (A1P)
ELECTRONIC EXPANSION VALVE (MAIN) (A1P)
ELECTRONIC EXPANSION VALVE (SUBCOOL) (A1P)
SOLENOID VALVE (HOT GAS) (A2P)
SOLENOID VALVE (RMTL) (A1P)
SOLENOID VALVE (RMTG) (A1P)
TERMINAL STRIP (CONTROL) (A1P)
SOLENOID VALVE (RMTO) (A2P)
SOLENOID VALVE (EV BYPASS) (A2P)
NOISE FILTER (FERRITE CORE)
SOLENOID VALVE (4 WAY VALVE) (PIPE) (A1P)
SOLENOID VALVE (4 WAY VALVE) (HEAT EXC. ) (A1P)
SOLENOID VALVE (RMTT) (A2P)
MAGNETIC RELAY (Y3S) (A1P)
MAGNETIC RELAY (Y1S) (A1P)
MAGNETIC RELAY (Y8S) (A2P)
MAGNETIC RELAY (Y2S) (A1P)
MOTOR (COMPRESSOR)
MAGNETIC RELAY (FOR OPTION) (A2P)
REACTOR (A3P)
MAGNETIC RELAY (E1HC) (A1P)
MOTOR (FAN)
MAGNETIC RELAY (CURRENT LIMITING) (A3P)
MAGNETIC RELAY (Y4S) (A1P)
RESISTOR (A3P)
RESISTOR (CURRENT SENSOR) (A3P)
SWITCHING POWER SUPPLY (A1P, A3P)
PHASE REVERSAL DETECT CIRCUIT (A1P)
THERMISTOR (FIN) (A3P)
THERMISTOR (AIR) (A1P)
MAGNETIC RELAY (Y7S) (A2P)
A1P
A2P
A3P
A4P
BS1~5C1E1HC
F1U, F2U
F1U
F1U
H1P~8P
HAP
K1M, K2M
K1R
K2R
PRINTED CIRCUIT BOARD (MAIN)
PRINTED CIRCUIT BOARD (SUB)
PRINTED CIRCUIT BOARD (INV, FAN)
PRINTED CIRCUIT BOARD (ELB)
PUSH BUTTON SWITCH
(MODE, SET, RETURN, TEST, RESET) (A1P)
CAPACITOR
CRANKCASE HEATER (A1P)
FUSE (T, 3.15A, 250V) (A1P)
FUSE (T, 3.15A, 250V) (A2P)
FUSE (16A, DC450V) (A3P)
PILOT LAMP (SERVICE MONITOR : ORANGE) (A1P)
[H2P] PREPARE, TEST-------------------FLICKERING
MALFUNCTION DETECTION---LIGHT UP
PILOT LAMP (SERVICE MONITOR-GREEN) (A1P) (A2P)
MAGNETIC RELAY (M1C) (A3P)
MAGNETIC RELAY (Y5S) (A2P)
MAGNETIC RELAY (Y6S) (A2P)
K3R
K3R
K4R
K5R
K5R
K6R
K7R
K11R
K84R
L1R
M1C
M1FPSQ1RP
R1
R112, R502
R1T
R1T
P<
S1PH
3D058614
EDUS39-802A-R2_a
16 REYQ-P Heat Recovery (208-230V)
REMQ96, 120PTJU
A4P
Z4C
N=4
+
LAYOUT OF M1C, M2C, M1F
Y5S
V2R
A2P
X3A
WHT
Y2S
(FRONT)
X7A
X3A
K2M
V
Z1C
N=4
S2NPL
X1A
Y3S
X9A
X26A
X2A
X6A
(BACK)
R9T
X18A
WHT
Q2
X2A
T2A
N=1
X1A
M
3~
A5P
RED
MS
3~
MS
3~
R1T
X3A
P<
P<
Z3C
N=3
5
K2M
X20A
X7A
A2P
Y1E
P1
A3P
K1R
X1A
C1
F1
Y4S
K84R
5
K5R
M1F
X5A
K3R
M
X8A
F2
X31A
TO
IN/D
UNIT
TO
OUT/D
UNIT
X16A
6
M1C
X37A
S2PH
V1R
X4A
WHT
RED
BLU
A1
F1
RED
F1U
t˚
t˚ t˚ t˚
t˚
t˚ t˚ t˚ t˚
X10A
X15A
F2U
A1P
K2M
-
X1M
U
NOTE) 4
HAP
NOTE) 4
R1
A4P
+
P2
A2
V3R
K6R
K1M
A1P
TERMINAL OF M1C, M2C
A3P
+
M2C
X1M
X5A
BLK
TO
MULTI
UNIT
K2R
K2M
S1PH
WHT
Y8S
T1A X1A
X28A
X1A
R1T
X21A
-
K1R
A5P
V
3
WHT
4
X30A
E1HC
X4A
X2A
E2HC
X3A
Y6S
GRN
L1R
BLK
W
X3A
RED
Y1S
X1M
BLU
RED
U
2
1
R32TR31T R2T R6TR5T R7TR4T
BLK
Q1RP
X4A
t˚
X12A
F1U
X504A
W
BLK
5
6
F1UR112
R502
M1F
S1NPH
NOTE) 5
X1A
X32A
V1CP
R8T
X29A
Q1
outdoor
(Q1) (Q2)
outdoor
(F1) (F2)
indoor
(F1) (F2)
F2
L1R
X7A X9A X14AX8A X12AX11A X15A
EL. COMPO. BOX
X11A
K11R
K5R
K3R
K4R
K10R
K7R
K8R
NOTE) 4
BLU
Y7S
WHT
X2A
Z2C
RED
U
U
X502A
Z1F
L1A
EL. COMPO. BOX
1 1
X501A
W
BLK
W
L3A
H1P H2P H3P H4P H5P H6P H7P H8P
BS1 BS2 BS3 BS4 BS5
HAP
X23A
5
BLU
WHT WHT
M
BLU
Y3E
WHT
V
V
Y2E
5
BLK
X22A
M
BLK
X1M
L3L1L2
E1
CASING
M1C
M2C
PS
L2A
PS
POWER SUPPLY
208-230V 3~60Hz
L1L2L3
RED
NOTES)
1. THIS WIRING DIAGRAM IS APPLIED ONLY TO THE
OUTDOOR UNIT.
2. : FIELD WIRING.
3. : TERMINAL STRIP : CONNECTOR : TERMINAL
: PROTECTIVE EARTH (SCREW)
4. WHEN USING THE OPTIONAL ADAPTOR, REFER TO THE
INSTALLATION MANUAL OF THE OPTIONAL ADAPTOR.
5. FOR CONNECTION WIRING TO INDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-OUTDOOR
TRANSMISSION F1 · F2, OUTDOOR-MULTI
TRANSMISSION Q1 · Q2, REFER TO THE INSTALLATION
MANUAL.
6. HOW TO USE BS1~5, REFER TO "SERVICE PRECAUTION"
LABEL ON EL. COMPO. BOX COVER.
7. WHEN OPERATING, DON' T SHORTCIRCUIT THE
PROTECTION DEVICE (S1PH, S2PH).
8. COLORS BLK : BLACK RED : RED BLU : BLUE
WHT : WHITE GRN : GREEN.
CONNECTOR FOR OPTIONAL PARTS
R6T
R9T
R7T
V2R, V3R
V1CP
S2NPL
X1M
X3A
R1T
S1PH, S2PH
R5T
R31T, R32T
R4T
T1A
R2T
X1A, X2A
T2A
R8T
S1NPH
V1R
X9A
X7A
Z1F
Y5S
Z1C~4C
Y1S
Y4S
Y1E
Y3S
Y7S
Y6S
Y2E
Y8S
X1M
Y3E
Y2S
PRESSURE SENSOR (HIGH) (A1P)
SAFETY DEVICES INPUT (A1P)
PRESSURE SWITCH (HIGH) (A1P)
CONNECTOR (Y1E)
DIODE BRIDGE (A3P)
THERMISTOR (LIQUID) (A2P)
THERMISTOR (HEAT EXC. DEICER) (A1P)
THERMISTOR (FIN) (A3P)
TERMINAL STRIP (POWER SUPPLY)
THERMISTOR (HEAT EXC. LIQUID) (A1P)
THERMISTOR (SUB COOL HEAT EXC. LIQUID) (A1P)
PRESSURE SENSOR (LOW) (A1P)
CURRENT SENSOR (A5P)
CURRENT SENSOR (A4P)
THERMISTOR (SUB COOL HEAT EXC. GAS) (A1P)
THERMISTOR (SUCTION) (A2P)
THERMISTOR (HEAT EXC. GAS) (A1P)
THERMISTOR (M1C, M2C DISCHARGE) (A1P)
POWER MODULE (A3P)
CONNECTOR (M1F)
OPERATION OUTPUT (A2P)
POWER SUPPLY (ADOPTER) (A2P)
NOISE FILTER (WITH SURGE ABSORBER) (A3P)
ELECTRONIC EXPANSION VALVE (CHARGE) (A1P)
ELECTRONIC EXPANSION VALVE (MAIN) (A1P)
ELECTRONIC EXPANSION VALVE (SUBCOOL) (A1P)
SOLENOID VALVE (HOT GAS) (A2P)
SOLENOID VALVE (RMTL) (A1P)
SOLENOID VALVE (RMTG) (A1P)
TERMINAL STRIP (CONTROL) (A1P)
SOLENOID VALVE (RMTO) (A2P)
SOLENOID VALVE (EV BYPASS) (A2P)
NOISE FILTER (FERRITE CORE)
SOLENOID VALVE (4 WAY VALVE) (PIPE) (A1P)
SOLENOID VALVE (4 WAY VALVE) (HEAT EXC. ) (A1P)
SOLENOID VALVE (RMTT) (A2P)
MAGNETIC RELAY (Y3S) (A1P)
MAGNETIC RELAY (Y1S) (A1P)
MAGNETIC RELAY (Y8S) (A2P)
MAGNETIC RELAY (Y2S) (A1P)
MAGNETIC RELAY (CURRENT LIMITING) (A3P)
RESISTOR (CURRENT SENSOR) (A3P)
MAGNETIC RELAY (FOR OPTION) (A2P)
MAGNETIC RELAY (Y4S) (A1P)
SWITCHING POWER SUPPLY (A1P, A3P)
MAGNETIC RELAY (E1HC) (A1P)
REACTOR (A3P)
MAGNETIC RELAY (FOR OPTION) (A3P)
MAGNETIC RELAY (E2HC) (A1P)
MOTOR (FAN)
PHASE REVERSAL DETECT CIRCUIT (A1P)
THERMISTOR (AIR) (A1P)
RESISTOR (CURRENT SENSOR) (A3P)
MAGNETIC RELAY (Y7S) (A2P)
MOTOR (COMPRESSOR)
MAGNETIC RELAY (Y6S) (A2P)
A1P
A2P
A3P
A4P
A5P
BS1~5
C1
E1HC, E2HC
F1U, F2U
F1U
F1U
H1P~8P
HAP
K1M, K2M
K2M
K1R
K1R
PRINTED CIRCUIT BOARD (MAIN)
PRINTED CIRCUIT BOARD (SUB)
PRINTED CIRCUIT BOARD (INV, FAN)
PRINTED CIRCUIT BOARD (CURRENT SENSOR)
PRINTED CIRCUIT BOARD (ELB)
PUSH BUTTON SWITCH
(MODE, SET, RETURN, TEST, RESET) (A1P)
CAPACITOR
CRANKCASE HEATER (A1P)
FUSE (T, 3.15A, 250V) (A1P)
FUSE (T, 3.15A, 250V) (A2P)
FUSE (16A, DC450V) (A3P)
PILOT LAMP (SERVICE MONITOR : ORANGE) (A1P)
[H2P] PREPARE, TEST-------------------FLICKERING
MALFUNCTION DETECTION---LIGHT UP
PILOT LAMP (SERVICE MONITOR-GREEN) (A1P) (A2P)
MAGNETIC RELAY (M1C) (A3P)
MAGNETIC CONTACTOR (M2C)
MAGNETIC RELAY (K2M) (A1P)
MAGNETIC RELAY (Y5S) (A2P)
K2R
K3R
K3R
K4R
K5R
K5R
K6R
K7R
K8R
K10R
K11R
K84R
L1R
M1C, M2C
M1FPSQ1RPR1R112, R502
R1T
t˚
: * IS CONNECTOR COLOR FOR PRINTED CIRCUIT BOARD.
: * IS CONNECTOR COLOR FOR COMPONENT.
: * IS DISCRIMINATION COLOR FOR COMPONENT LEAD WIRE.
***
3D058512C
EDUS39-802A-R2 Field Wiring
REYQ-P Heat Recovery (208-230V) 17
6. Field Wiring
REYQ72, 96, 120, 144PTJU
L1
COOLING ONLY UNIT
L2
SWITCH
L2
L1
POWER SUPPLY
L1
FUSE
L1
POWER SUPPLY
L1
MAIN
SWITCH
L2
MAIN
SWITCH
L2
FUSE
SWITCH
FUSE
SWITCH
L2 L1
FUSE
SWITCH
L2
L3
L3
OUTDOOR UNITS
2 WIRES CABLE
(POWER LINE)
2 WIRES CABLE
(POWER LINE)
INDOOR UNITS
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(TRANSMISSION LINE)
2 WIRES CABLE
(POWER LINE)
L2L1
FUSE
SWITCH
2 WIRES CABLE
(POWER LINE)
L2L1
SWITCH
2 WIRES CABLE
(POWER LINE)
L2L1
FUSE
FUSE
SWITCH
2 WIRES CABLE
(POWER LINE)
L2L1
FUSE
SWITCH
2 WIRES CABLE
(POWER LINE)
L2L1
FUSE
SWITCH
2 WIRES CABLE
(POWER LINE)
BS UNITS
Notes 1) All wiring, components and materials to be
procured on the site must comply with the
applicable local and national codes.
2) Use copper conductors only.
3) As for details, see wiring diagram.
4) Install ground fault circuit interrupter for safety.
5) All field wiring and components must be provided by licensed electrician.
6) Unit shall be grounded in compliance with the applicable local and
national codes.
7) Wiring shown are general points-of-connection guides only and are not
intended for or to include all details for a specific installation.
8) Be sure to install the switch and the fuse to the power line of each
equipment.
9) Install the main switch that can interrupt all the power souces in an
integrated manner because this system consists of the equipment utilizing
the multiple power sources.
10) If there exists the possibility of reversed phase, lose phase, momentary
blackout or the power goes on and off while the product is operating,
attach a reversed phase protection circuit locally.
Running the product in reversed phase may break the compressor and
other parts.
3D058622
Loading...