Daikin 5MKS100LVMA, 3MKS58LVMA, 3MXS52LVMA, 3MXS68LVMA, 4MXS80LVMA Overview

Multi-Split Type Air Conditioners L series
With DC Inverter and Swing Compressor
Cooling Only & Heat Pump [50 Hz]

The Comfort and Luxury You Deserve

All rights reserved
09/12 DN

c

Dealer

Head Office:
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,
Kita-ku, Osaka, 530-8323 Japan

Tokyo Office:
JR Shinagawa East Bldg., 2-18-1, Konan,
Minato-ku, Tokyo, 108-0075 Japan

http://www.daikin.com/global_ac/

1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.

2. If the outdoor unit is to be installed close to the sea, direct exposure to sea breeze should be avoided. If you need to install
the outdoor unit close to the sea, contact your local distributor.

Cautions on product corrosion

Specifications, designs and other content appearing in this brochure are current as of September 2012 but subject to change without notice.

Daikin Australia

Pty Limited (ISO9001)

QEC23256 May 31, 2006

Sydney, Brisbane, Adelaide,

Melbourne, Newcastle,

Townsville, Perth, Auckland

Daikin Australia

Pty Limited (ISO14001)

CEM20437 October 27, 2006
Sydney, Brisbane, Melbourne,

Adelaide

Organization:
DAIKIN INDUSTRIES, LTD.
AIR CONDITIONING MANUFACTURING
DIVISION

Scope of Registration:
THE DESIGN/DEVELOPMENT AND
MANUFACTURE OF COMMERCIAL AIR
CONDITIONING, HEATING, COOLING,
REFRIGERATING EQUIPMENT, HEATING
EQUIPMENT, RESIDENTIAL AIR
CONDITIONING EQUIPMENT, HEAT
RECLAIM VENTILATION, AIR CLEANING
EQUIPMENT, COMPRESSORS AND VALVES.

Organization:
DAIKIN INDUSTRIES
(THAILAND) LTD.

Scope of Registration:
THE DESIGN/DEVELOPMENT
AND MANUFACTURE OF AIR
CONDITIONERS AND THE
COMPONENTS INCLUDING
COMPRESSORS USED FOR
THEM

All of the Daikin
Group’s business
facilities and
subsidiaries in Japan
are certified under the
ISO 14001
international standard
for environment
management.

Warning

Daikin products are manufactured for export to numerous countries throughout the world. Prior to
purchase, please confirm with your local authorised importer, distributor and/or retailer whether this
product conforms to the applicable standards, and is suitable for use, in the region where the product
will be used. This statement does not purport to exclude, restrict or modify the application of any local
legislation.

Ask a qualified installer or contractor to install this product. Do not try to install the product yourself.
Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion and
may have resultant impacts on warranty.

Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or
contractor to install those parts and accessories. Use of unauthorised parts and accessories or
improper installation of parts and accessories can result in water or refrigerant leakage, electrical
shock, fire or explosion.

Read the User's Manual carefully before using this product. The User's Manual provides important
safety instructions and warnings. Be sure to follow these instructions and warnings.

If you have any enquiries, please contact your local importer, distributor and/or retailer.

JQA-1452JMI-0107

PCRAU0644G

Contents

Air condition multiple rooms
in your home
with a single outdoor unit.

Air condition multiple rooms
in your home
with a single outdoor unit.

The Daikin Super Multi NX lets you build a highly efficient multi room air conditioning
system by connecting up to five indoor units to a single outdoor unit. The series includes a
wide variety of indoor units, so it is easy to select a model that blends in unobtrusively. A
single compact outdoor unit allows you to make more efficient use of available space in the
installation location, such as a balcony. The individual indoor units in different rooms—the
living room, study, and bedrooms, for example—can be controlled independently to match
your family’s lifestyle. Super Multi NX can make your home more comfortable.

Super Multi NX is the knowledgeable choice.

Concepts

Main features

Product lineup

Functions

Specifications

Options

Capacity tables

3

5

9

19

23

26

27

1

2

Concepts Concepts

Key concepts for Super Multi NX

Enjoy the comfort and luxury of your dreams.

In 1969, Daikin developed the first multi room air conditioning system in Japan that needed

just one outdoor unit. Over the ensuing 40 years, Daikin has built an enviable reputation
with the constant progress of its technology. Super Multi NX requires only a single outdoor
unit to maintain comfort in up to five rooms. Where outdoor unit installation space is limited,
it is the ideal choice. Air conditioner settings for each room can be controlled individually to

suit the preference of each person. While optimising personal comfort,

Super Multi NX uses DC inverter technology, making it energy efficient.

5MK(X)S series

The DC motor, swing compressor and other
advanced technologies make for energy-efficient
operation that achieves high COPs.

The quiet operation mode helps create a more
pleasant living environment. DC inverter power
control provides comfortable temperature control.

The wide range of indoor unit options provides
ample choice. A single compact outdoor unit
reduces installation space requirements, while
long maximum piping lengths provide flexibility
for connections.

The individual indoor units in different rooms can
be controlled independently. The priority-room
setting function lets you specify a room to receive
preference in air conditioning operation.

Up to 5 indoor units can be connected.

4MK(X)S series

Up to 4 indoor units can be connected.

3MK(X)S series

Up to 3 indoor units can be connected.

Connect 5 indoor units to a single outdoor unit

New

New

3

4

5 6

2

1

3

What is COP?

An air conditioner's COP (coefficient of performance) indicates how
efficiently it uses energy. A high COP means high energy efficiency.

COP =

Capacity (W)

Power consumption (W)

Main features Main features

ntelligent
technologies

High energy efficiency through advanced

technologies delivers high COP.

deal
environment

Convenient features to create your

ideal environment

* During rated capacity operation of 5 indoor units
(2.0 + 2.0 + 2.0 + 2.0 + 2.0 kW class).

High energy efficiency

COP

4.583.65

Cooling operation Heating operation

5MXS100LVMA

Pulse Amplitude Modulation (PAM) control
reduces energy loss by controlling the amount
of switching on/off of the converter.

50

0 30 60 90 120

60

70

80

90

Small load Large load
Low capacity High capacity

Reluctance DC Motor

Conventional

DC motor

More than 20%

AC motor

Rotational speed (rps)

Motor efficiency (%)

Loss

Loss

Power supply

POWER

Power
factor

Converter
efficiency

Inverter
efficiency

Swing compressor

Reluctance DC motor

PAM control

Daikin energy-efficient technologies

The swing compressor can reduce
operational vibration and sound
because its piston moves smoothly
inside the compressor.

Swing bush

Integral piston of
blade and roller

Refrigerant gas

Reluctance DC motor

Swing compressor

Thanks to its smooth
rotation, the swing
compressor decreases
friction and vibration. It also
prevents the leakage of
refrigerant gas during
compression. These
advantages provide quiet
and efficient operation.

The use of a Reluctance DC motor with
neodymium magnets

*1

for our
compressors has improved motor
efficiency by more than 20% compared
to AC motors. The high torque

*2

and
stronger magnetic force produced is
beneficial particularly at low load
conditions.

*1. A neodymium magnet is approximately 10 times stronger than a standard ferrite

magnet.

*2. The torque created by the change in power between the iron and magnet parts.

Note: Data are based on studies conducted under

controlled conditions at a Daikin laboratory.

Neodymium magnets are used
in the pink-coloured area.

1

2

3

Indoor unit

During cooling operation

Set temp.

Temp.

Time

Starts

Too cool

Not cool

Non-inverter air conditioners can
only perform simple on/off
operation. They start operation
when the temperature rises and
stop when the room reaches the
set temperature and then switch to
low-capacity operation. As a result,
inverter air conditioners are more
energy efficient and comfortable
than non-inverter air conditioners.

Non-inverter type

DC inverter type

* This diagram is a representation for illustrative purposes only.

Quiet operation

Comfortable temperature control

Wide operation range

Outdoor unit

Rustling of leaves

Quiet library

Midnight in the suburbs Quiet office

22 dB (A) is so quiet you can even hear whispers

50403020

(dB(A))

22 dB (A)

Heat pump type 4MXS80

With Super Multi NX, cooling operation is possible even during lower
outdoor temperatures.

Note: This information is for heat pump type.

Super Multi NX achieves a quiet sound level of 43 dB (A) during Outdoor Unit Quiet Operation or Night Quiet
Mode of the 3MXS52 during cooling operation.

Note: Capacity may decrease when quiet functions are selected.

Super Multi NX offers the quiet sound level of 22 dB (A) during
Indoor Unit Quiet Operation of the FTXS20/25 during cooling
operation.

Note: Capacity may decrease when quiet functions are selected.

-10

0

10

20

30

40

50

-20

-10

0

10

20

15.5°C WB

Heating

46°C DB

Cooling

-10°C DB

–15°C WB

Outdoor temperature (°C DB)

Outdoor temperature (°C WB)

7

8

Only 240 mm is required above the
ceiling for installation.

The ample maximum piping length of 80 m permits
more freedom in the placement of air conditioner units
and facilitates the optimisation of interior space.

Max.
piping length

Total

For one room

25 m

3MKS58

3MXS52

50 m

3MKS68

3MXS68

60 m

4MKS80

4MXS80

70 m

5MKS100

5MXS100

80 m

30 m

The stylish panel design of the wall­mounted type provides an excellent
match for interiors.

Model name

Stylish indoor units for elegant interiors

Compact outdoor units for a less obtrusive exterior look

Long piping lengths for installation flexibility

The system requires only a single
outdoor unit. The compact design
provides installation flexibility and
takes up less space, for a less
obtrusive exterior look.

The compact and simple design blends in with the
type of room.

Room C

Room B

Room A

Priority room

Living room

Power Up!

Priority room

Living room

Room A

Room B

Room C

Priority setting with Inverter Powerful Operation

Priority setting with Outdoor Unit Quiet Operation

When Inverter Powerful Operation is selected in the priority room, the indoor unit capacity in the priority room is
increased by shifting capacity from units in other rooms. After 20 minutes, all units automatically return to their
original settings.

Note: Capacity in other rooms may decrease slightly.

Priority-Room Setting also allows Outdoor Unit Quiet Operation to be selected by one command* from the
priority room.
* If Priority-Room Setting has not been set, the Outdoor Unit Quiet Operation button must be pushed on the
wireless remote controller of all indoor units operating at that time.

Convenient remote controllers

Preferential air conditioning

Priority setting with operation mode

The operation mode (cooling/heating) of the indoor unit in the priority room is given preference. When the
operation modes of the units in other rooms are different from the unit in the priority room, the units in the other
rooms wait on standby.

Note: Operation mode can not be changed from other rooms.

5-room centralised
controller

(option)

Central remote controller

(option)

Unified on/off
controller

(option)

Wired remote
controller

(option)

Wireless remote
controller

Initial setting required during installation

Priority-Room Setting delivers priority capacity to a prioritised room when using multi-split air conditioners.
After a priority room is selected, it receives preferential air-conditioning plus priority control over the 3 functions below.

1

2

3

A variety of convenient controller systems permit individual control of
settings such as temperature, airflow volume, and operation duration.

Wide range of choices to match
your interior

Individual control for each room to match
your family’s lifestyle

Main features Main features

nterior &
exterior
flexibility

ndividual
control

9

10

Outdoor unit

Indoor unit

Connectable to up to 3 indoor units

Wall-mounted type

Connectable to up to 4 indoor units

7.1 kW6.0 kW5.0 kW3.5 kW2.5 kW

Cooling only

Heat pump

FTKS35KVMA

FTXS35KVMA

FTKS25KVMA

FTXS25KVMA

FTKS20KVMA

FTXS20KVMA

Cooling only

Heat pump

FTKS71KAVMA

FTXS71KAVMA

FTKS60KAVMA

FTXS60KAVMA

FTKS50KAVMA

FTXS50KAVMA

Model name

Model

Capacity class

3MKS58LVMA

3MXS52LVMA

3MKS68LVMA

3MXS68LVMA

Cooling only

Heat pump

4MKS80LVMA

4MXS80LVMA

5.8 kW

Max. piping length

50 m

Max. height difference

15 m

5.2 kW

6.8 kW

6.8 kW

8.0 kW

8.0 kW

50 m

60 m

60 m

70 m

70 m

15 m

15 m

15 m

15 m

15 m

Cooling only

Heat pump

CDKS35EAVMA

CDXS35EAVMA

CDKS25EAVMA

CDXS25EAVMA

Cooling only

Heat pump

CDKS60CVMA

FDXS60CVMA

CDKS50CVMA

FDXS50CVMA

CDKS35CVMA

FDXS35CVMA

CDKS25CVMA

FDXS25CVMA

Heat pump

FVXS50KV1AFVXS35KV1AFVXS25KV1A

Heat pump

FLXS60GVMAFLXS50GVMAFLXS35GVMAFLXS25BVMA

Cooling only

Heat pump

FFQ60BV1B

FFQ60BV1B

FFQ50BV1B

FFQ50BV1B

FFQ35BV1B

FFQ35BV1B

FFQ25BV1B

FFQ25BV1B

Cooling only

Heat pump

Duct-connected type

Floor-standing type

Floor/ceiling-suspended dual type

Compact multi flow ceiling-mounted
cassette type

700 mm width

900/1,100 mm width

Cooling only

Possible combinations for indoor and outdoor units

Heat pump

Model

Capacity class

Model

Capacity class

Connectable to up to 5 indoor units

2.0 kW

7.1 kW6.0 kW

5.0 kW

3.5 kW2.5 kW2.0 kW

3MKS58L
3MKS68L
4MKS80L

3MXS52L
3MXS68L
4MXS80L

Option

5MKS100L

5MXS100L

Cooling only

Heat pump

5MKS100LVMA

5MXS100LVMA

10.0 kW

10.0 kW

80 m

80 m

15 m

15 m

An attractive match for large rooms with
refined interiors is provided by the stylish
panel design.

Wall-mounted type

Fits in shallow ceiling recesses only 240 mm
deep thanks to the new slim and compact
design.

Duct-connected type

Unobtrusive and convenient with a floor­standing compact design.

Floor-standing type

Chose either ceiling-suspended or floor-level
installation for this attractive model with a
beautiful, rounded design.

Floor/ceiling-suspended dual type

Compact multi flow ceiling­mounted cassette type

The compact and flexible design is suited to
commercial spaces such as offices.

Product lineup Product lineup

A wide range of models to choose from that deliver comfort and convenience An array of indoor unit models with innovative and attractive designs make

it easy to find the ideal match for each room in your home.

New

New

11

12

Titanium Apatite
Photocatalytic
Air-purifying Filter

Air filter

Catches dust

Wall-Mounted Type

6.0 kW class

FTKS60KAVMA

FTXS60KAVMA

5.0 kW class

FTKS50KAVMA

FTXS50KAVMA

7.1 kW class

FTKS71KAVMA

FTXS71KAVMA

Cooling only

Heat pump

2.5 kW class

FTKS25KVMA

FTXS25KVMA

2.0 kW class

FTKS20KVMA

FTXS20KVMA

3.5 kW class

FTKS35KVMA

FTXS35KVMA

Cooling only

Heat pump

Flat panel can be cleaned
with just a single pass of a
cloth across its smooth
surface.

Indoor unit lineup Indoor unit lineup

Vertical and horizontal airflow is controlled
by Power-Airflow Dual Flaps and Wide­Angle Louvers working in tandem, realising
even distribution of air.

Uses a Titanium Apatite Photocatalytic Air-Purifying
Filter. Titanium apatite is a photocatalytic material
with high adsorption power. It effectively adsorbs
and removes bacteria.

These filters are not medical devices. Benefits such as the
adsorption and decomposition of bacteria are only effective for
substances that are collected on and in direct contact with the
Titanium Apatite Photocatalytic Air-Purifying Filter.

Bacteria Removal Test
Testing method: dropping method
Result certificate: No. 012553-1 and 012553-2
Testing organisation: Japan Spinners Inspecting Foundation

Evenly distributed air

3-D airflow

Comfort airflow mode

Clean air

Easy cleaning

Wall-mounted type indoor units achieve quiet sound
level of 22 dB (A) during Indoor Unit Quiet Operation.

During cooling operation

Quiet operation

Intelligent eye

Intelligent Eye with its infrared sensor automatically
controls air conditioner operation according to human
movement in a room. When there is no movement, it

adjusts the temperature by ± 2˚C for energy efficiency.

Econo mode

Econo Mode is a function that reduces the maximum
running current and the maximum power
consumption of the outdoor unit to the rated values.

This mode is useful for preventing circuit breakers
from being overloaded by the use of multiple air conditioners
and other electrical devices. The function is easily activated
from the remote controller by pushing the ECONO button.

• This diagram is a representation for illustrative purposes only.

•

Maximum capacity decreases during Econo Mode, requiring
more time to reach the set temperature.

Running current and power consumption

From start-up until set
temperature is reached

Maximum

Rated

Maximum during
normal operation

Time

Normal
operation

Econo
Mode

Maximum during
Econo Mode

Option

During cooling the Power-Airflow
Dual Flaps flatten out to deliver air
to the farthest corners of the room.

During heating the near-vertical flaps
direct air to the floor to quickly warm
the room.

*

* Heat pump only

3-D Airflow combines Vertical and Horizontal Auto­Swing to circulate air to every part of a room for
uniform cooling/heating of even large spaces.

Comfort Airflow Mode prevents uncomfortable drafts
from blowing directly on to your body. With this

function, when you press the COMFORT button
during cooling operation, the flap moves upward to prevent
direct cold drafts. During heating operation, it also moves
downward to prevent direct drafts and deliver warm air to the
floor.

Cooling operation Heating operation

When you are in the room.

When you go out.

A luminescent
material is
used for the
buttons on the
surface.

The LCD
panel with
backlight

Weekly Timer

operation button

The remote controller with a backlit liquid crystal
display and luminescent control buttons also

features a built-in Weekly Timer that can be
programmed to suit your lifestyle, with up to four actions per
day for each day of the week.
This controller not only allows you to programme on and off
times, but also the desired temperature during those times.
Furthermore, the ‘copy’ function enables any daily
programme to be replicated on any other day or days as
required.

Weekly timer

*

* Heat pump only

* Capacity may be affected.

FTXS25FTXS20 FTXS35

42/26/23 dB(A)

(H/L/SL)

38/25/22 dB(A)

Option