INSTALLATION
MANUAL
R32 Split Series
Deutsch
Français
Models
3MXM40N2V1B
3MXM52N2V1B
3AMXM52M3V1B
3MXM68N2V1B
4MXM68N2V1B
4MXM80N2V1B
5MXM90N2V1B
Nederlands
Español
Italiano
Ελληνικά
Portugues
Русский
Türkçe
CE - ATITIKTIES-DEKLARACIJA
<A> DAIKIN.TCF.032C16/04-2017
<B> DEKRA (NB0344)
<C> 2159619.0551-EMC
<D> TCF-CZ16009-03
<E> VINÇOTTE nv (NB0026)
<F> D1
<G> 100379113/1115
<H>
II
CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - VYHLÁSENIE-ZHODY
CE - UYGUNLUK-BEYANI
CE - IZJAVA O SKLADNOSTI
CE - VASTAVUSDEKLARATSIOON
CE - ДЕКЛАРАЦИЯ-ЗА-ϹЪОТВЕТСТВИЕ
deklaruje na własną i wyłączną odpowiedzialność, że modele klimatyzatorów, których dotyczy niniejsza deklaracja:
declară pe proprie răspundere că aparatele de aer condiţionat la care se referă această declaraţie:
z vso odgovornostjo izjavlja, da so modeli klimatskih naprav, na katere se izjava nanaša:
kinnitab oma täielikul vastutusel, et käesoleva deklaratsiooni alla kuuluvad kliimaseadmete mudelid:
декларира на своя отговорност, че моделите климатична инсталация, за които се отнася тази декларация:
visiška savo atsakomybe skelbia, kad oro kondicionavimo prietaisų modeliai, kuriems yra taikoma ši deklaracija:
ar pilnu atbildību apliecina, ka tālāk uzskaitīto modeļu gaisa kondicionētāji, uz kuriem attiecas šī deklarācija:
vyhlasuje na vlastnú zodpovednosť, že tieto klimatizačné modely, na ktoré sa vzťahuje toto vyhlásenie:
m
r
o
x
b
t
v
17
18
19
20
CE - IZJAVA-O-USKLAĐENOSTI
CE - MEGFELELŐSÉGI-NYILATKOZAT
CE - DEKLARACJA-ZGODNOŚCI
CE - DECLARAŢIE-DE-CONFORMITATE
CE - ERKLÆRING OM-SAMSVAR
CE - ILMOITUS-YHDENMUKAISUUDESTA
CE - PROHLÁŠENÍ-O-SHODĚ
заявляет, исключительно под свою ответственность, что модели кондиционеров воздуха, к которым относится настоящее заявление:
erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:
deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna deklaration innebär att:
erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne deklarasjonen, innebærer at:
u
q
s
n
09
10
11
12
CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE
CE - DECLARAÇÃO-DE-CONFORMIDADE
CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ
CE - OVERENSSTEMMELSESERKLÆRING
CE - DECLARACION-DE-CONFORMIDAD
CE - DICHIARAZIONE-DI-CONFORMITA
CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ
declares under its sole responsibility that the air conditioning models to which this declaration relates:
erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung bestimmt ist:
déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente déclaration:
verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze verklaring betrekking heeft:
a
d
f
l
CE - DECLARATION-OF-CONFORMITY
Daikin Industries Czech Republic s.r.o.
CE - KONFORMITÄTSERKLÄRUNG
CE - DECLARATION-DE-CONFORMITE
CE - CONFORMITEITSVERKLARING
01
02
03
04
21
ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden mallit:
j
13
declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace referencia la declaración:
e
05
22
prohlašuje ve své plné odpovědnosti, že modely klimatizace, k nimž se toto prohlášení vztahuje:
c
14
dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:
i
06
23
izjavljuje pod isključivo vlastitom odgovornošću da su modeli klima uređaja na koje se ova izjava odnosi:
y
15
δηλώνει με αποκλειστική της ευθύνη ότι τα μοντέλα των κλιματιστικών συσκευών στα οποία αναφέρεται η παρούσα δήλωση:
g
07
k
24
teljes felelőssége tudatában kijelenti, hogy a klímaberendezés modellek, melyekre e nyilatkozat vonatkozik:
h
16
declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta declaração se refere:
p
08
tamamen kendi sorumluluǧunda olmak üzere bu bildirinin ilgili olduǧu klima modellerinin aşaǧıdaki gibi olduǧunu beyan eder:
w
25
.
a kladne
<D>
v súlade
Certifikátu <G>
<B>
) podľa
<F>
Direktive z vsemi spremembami.20Direktiivid koos muudatustega.21Директиви, с техните изменения.22Direktyvose su papildymais.23Direktīvās un to papildinājumos.24Smernice, v platnom znení.25Deǧiştirilmiş halleriyle Yönetmelikler.
19
съответстват на следните стандарти или други нормативни
документи, при условие, че се използват съгласно нашите
инструкции:22atitinka žemiau nurodytus standartus ir (arba) kitus norminius
dokumentus su sąlyga, kad yra naudojami pagal mūsų
nurodymus:23tad, ja lietoti atbilstoši ražotāja norādījumiem, atbilst sekojošiem
standartiem un citiem normatīviem dokumentiem:24sú v zhode s nasledovnou(ými) normou(ami) alebo iným(i)
normatívnym(i) dokumentom(ami), za predpokladu, že sa
používajú v súlade s našim návodom:25ürünün, talimatlarımıza göre kullanılması koşuluyla aşağıdaki
21
spełniają wymogi następujących norm i innych dokumentów
normalizacyjnych, pod warunkiem że używane są zgodnie z
naszymi instrukcjami:18sunt în conformitate cu următorul (următoarele) standard(e) sau
alt(e) document(e) normativ(e), cu condiţia ca acestea să fie
utilizate în conformitate cu instrucţiunile noastre:19skladni z naslednjimi standardi in drugimi normativi, pod
17
pogojem, da se uporabljajo v skladu z našimi navodili:20on vastavuses järgmis(t)e standardi(te)ga või teiste
standartlar ve norm belirten belgelerle uyumludur:
Direktiver, med senere ændringer.11Direktiv, med företagna ändringar.12Direktiver, med foretatte endringer.13Direktiivejä, sellaisina kuin ne ovat muutettuina.14v platném znění.15Smjernice, kako je izmijenjeno.16irányelv(ek) és módosításaik rendelkezéseit
10
normatiivsete dokumentidega, kui neid kasutatakse vastavalt
meie juhenditele:
Directives, as amended.02Direktiven, gemäß Änderung.03Directives, telles que modifiées.04Richtlijnen, zoals geamendeerd.05Directivas, según lo enmendado.06Direttive, come da modifica.07Οδηγιών, όπως έχουν τροποποιηθεί.08Directivas, conforme alteração em.09Директив со всеми поправками.
01
******
vastaavat seuraavien standardien ja muiden ohjeellisten
dokumenttien vaatimuksia edellyttäen, että niitä käytetään
ohjeidemme mukaisesti:14za předpokladu, že jsou využívány v souladu s našimi pokyny,
odpovídají následujícím normám nebo normativním
dokumentům:15u skladu sa slijedećim standardom(ima) ili drugim normativnim
dokumentom(ima), uz uvjet da se oni koriste u skladu s našim
uputama:16megfelelnek az alábbi szabvány(ok)nak vagy egyéb irányadó
13
dokumentum(ok)nak, ha azokat előírás szerint használják:
Machinery 2006/42/EC
Pressure Equipment 2014/68/EU
Electromagnetic Compatibility 2014/30/EU
соответствуют следующим стандартам или другим
нормативным документам, при условии их использования
согласно нашим инструкциям:10overholder følgende standard(er) eller andet/andre
retningsgivende dokument(er), forudsat at disse anvendes i
henhold til vore instrukser:11respektive utrustning är utförd i överensstämmelse med och
följer följande standard(er) eller andra normgivande dokument,
under förutsättning att användning sker i överensstämmelse med
våra instruktioner:12respektive utstyr er i overensstemmelse med følgende
standard(er) eller andre normgivende dokument(er), under
χρησιμοποιούνται σύμφωνα με τις οδηγίες μας:08estão em conformidade com a(s) seguinte(s) norma(s) ou
normatif(s), pour autant qu'ils soient utilisés conformément à nos
instructions:04conform de volgende norm(en) of één of meer andere bindende
outro(s) documento(s) normativo(s), desde que estes sejam
forutssetning av at disse brukes i henhold til våre instrukser:
ob upoštevanju določb:20vastavalt nõuetele:21следвайки клаузите на:22laikantis nuostatų, pateikiamų:23ievērojot prasības, kas noteiktas:24održiavajúc ustanovenia:25bunun koşullarına uygun olarak:
19
utilizados de acordo com as nossas instruções:
under iagttagelse af bestemmelserne i:11enligt villkoren i:12gitt i henhold til bestemmelsene i:13noudattaen määräyksiä:14za dodržení ustanovení předpisu:15prema odredbama:16követi a(z):17zgodnie z postanowieniami Dyrektyw:18în urma prevederilor:
10
documenten zijn, op voorwaarde dat ze worden gebruikt
overeenkomstig onze instructies:
following the provisions of:02gemäß den Vorschriften der:03conformément aux stipulations des:04overeenkomstig de bepalingen van:05siguiendo las disposiciones de:06secondo le prescrizioni per:07με τήρηση των διατάξεων των:08de acordo com o previsto em:09в соответствии с положениями:
01
EN60335-2-40
09
están en conformidad con la(s) siguiente(s) norma(s) u otro(s)
documento(s) normativo(s), siempre que sean utilizados de
acuerdo con nuestras instrucciones:06sono conformi al(i) seguente(i) standard(s) o altro(i)
documento(i) a carattere normativo, a patto che vengano usati in
conformità alle nostre istruzioni:07είναι σύμφωνα με το(α) ακόλουθο(α) πρότυπο(α) ή άλλο
05
are in conformity with the following standard(s) or other
normative document(s), provided that these are used in
3MXM40N2V1B, 3MXM52N2V1B, 3AMXM52M3V1B, 3MXM68N2V1B, 4MXM68N2V1B, 4MXM80N2V1B, 5MXM90N2V1B,
01
accordance with our instructions:02der/den folgenden Norm(en) oder einem anderen
έγγραφο(α) κανονισμών, υπό την προϋπόθεση ότι
Normdokument oder -dokumenten entspricht/entsprechen, unter
der Voraussetzung, daß sie gemäß unseren Anweisungen
eingesetzt werden:03sont conformes à la/aux norme(s) ou autre(s) document(s)
a pozitívne zistené
<A>
.
(Aplikovaný modul
.
z późniejszymi poprawkami.18Directivelor, cu amendamentele respective.
17
Low Voltage 2014/35/EU
<E>
osvedčením <C>
ako bolo uvedené v
s
posúdené
** ako je to stanovené v Súbore technickej konštrukcie
24 *
<E>
. Kategorija
v skladu
<B>
in odobreno s strani
certifikatom <G>
<D>
) v skladu s
in odobreno s strani
.
<F>
<A>
certifikatom <C>
s
kot je določeno v
(Uporabljen modul
** kot je določeno v tehnični mapi
19 *
prema
<B>
i pozitivno
<D>
) prema
<F>
(Primijenjen modul
i pozitivno ocijenjeno od strane
<E>
<A>
.
ocijenjeno od strane
kako je izloženo u
Certifikatu <C>
** kako je izloženo u Datoteci o tehničkoj konstrukciji
15 *
<E>
.
<H>
. Risikoklasse
i henhold tilPressure
og positivt vurderet af
<G>
<B>
<D>
.
Certifikat
Certifikat <C>
i henhold til
)
og positivt vurderet af
<F>
<A>
som anført i
som anført i den Tekniske Konstruktionsfil
Equipment 2014/68/EU
(Anvendt modul
**
10 *
secondo
<B>
e giudicato
<D>
applicato) secondo il
<F>
(Modulo
e giudicato positivamente da
.
<E>
<A>
Certificato <C>
positivamente da
il
delineato nel
** delineato nel File Tecnico di Costruzione
06 *
and judged
according to the
<D>
<B>
) according to the
<F>
and judged positively by
(Applied module
.
<E>
<A>
positively by
as set out in
Certificate <C>
** as set out in the Technical Construction File
01 *
. Viď tiež nasledovnú stranu.
<H>
Kategória nebezpečia
. Glejte tudi na naslednji strani.
<H>
tveganja
Također pogledajte
<H>.
. Kategorija opasnosti
Certifikatu <G>
Se også næste side.
. Fare riferimento
<H>
. Categoria di rischio
Certificato <G>
. Also refer to next page.
<H>
. Risk category
<G>
certificate
tarafından
<B>
göre
<C> Sertifikasına
’da belirtildiği gibi ve
olumlu olarak değerlendirildiği gibi.
25 * <A>
järgi
<B>
ja heaks kiidetud
<A>
.
sertifikaadile <C>
nagu on näidatud dokumendis
vastavalt
20 *
igazolta a megfelelést, a(z)
<B>
alapján, a(z)
<A>
na slijedećoj stranici.
a(z)
16 *
.
som positivt
<D>
Certifikatet <C>
enligt
<B>
och godkänts av
<A>
enligt
** i enlighet med den Tekniska Konstruktionsfilen
11 *
σύμφωνα
<B>
και κρίνεται θετικά από το
<A>
anche alla pagina successiva.
όπως καθορίζεται στο
07 *
positiv beurteilt gemäß
<B>
.
aufgeführt und von
<A>
wie in
Zertifikat <C>
02 *
)
<F>
<G> Sertifikasına
tarafından olumlu olarak (Uygulanan modül
<E>
Teknik Yapı Dosyasında belirtildiği gibi ve
<D>
göre
**
.
ja heaks kiidetud
<D>
sertifikaadile <G>
) vastavalt
<F>
järgi (lisamoodul
<E>
** nagu on näidatud tehnilises dokumentatsioonis
<E>
szerint.
műszaki konstrukciós dokumentáció alapján, a(z)
<D>
<C> tanúsítvány
** a(z)
) vilket också framgår av
. Se även nästa sida.
<F>
<H>
(Fastsatt modul
. Riskkategori
<E>
Certifikat <G>
intygats av
και
<D>
.
Πιστοποιητικό <C>
με το
** όπως προσδιορίζεται στο Αρχείο Τεχνικής Κατασκευής
aufgeführt und
<D>
) positiv ausgezeichnet gemäß
<F>
(Angewandtes Modul
<E>
von
** wie in der Technischen Konstruktionsakte
. Ayrıca bir sonraki
<H>
. Risk kategorisi
<G>
değerlendirilmiştir.
sayfaya bakın.
и
съгласно
<D>
<B>
и оценено положително от
<A>
. Vaadake ka järgmist lehekülge.
.
<H>
Сертификата <C>
Riskikategooria
* както е изложено в
** както е заложено в Акта за техническа конструкция
21
.
<H>
<B>
), a(z)
<F>
, pozytywną opinią
<A>
szerint. Veszélyességi kategória
Lásd még a következő oldalon.
<G> tanúsítvány
zgodnie z dokumentacją
igazolta a megfelelést (alkalmazott modul:
17 *
<B>
og
) ifølge
<D>
<F>
(Anvendt modul
<E>
og gjennom positiv bedømmelse av
<A>
.
Sertifikat <C>
gjennom positiv bedømmelse av
ifølge
som det fremkommer i
** som det fremkommer i den Tekniske Konstruksjonsfilen
12 *
)
<F>
<B>
. Κατηγορία επικινδυνότητας
e com o parecer positivo de
(Χρησιμοποιούμενη υπομονάδα
<A>
<E>
Πιστοποιητικό <G>
. Ανατρέξτε επίσης στην επόμενη σελίδα.
<H>
tal como estabelecido em
σύμφωνα με το
κρίνεται θετικά από το
08 *
et jugé
<D>
<B>
.
. Siehe auch nächste Seite.
<H>
et évalué positivement par
<A>
Certificat <C>
. Risikoart
Zertifikat <G>
tel que défini dans
conformément au
** tel que stipulé dans le Fichier de Construction Technique
03 *
) съгласно
<F>
. Вижте също на
<H>
(Приложен модул
<E>
. Категория риск
Сертификат <G>
оценено положително от
следващата страница.
<D>
) zgodnie
<F>
(Zastosowany moduł
.
<E>
Świadectwem <C>
i pozytywną opinią
i
** zgodnie z archiwalną dokumentacją konstrukcyjną
on hyväksynyt
<B>
. Se også neste side.
ja jotka
<H>
<A>
mukaisesti.
. Risikokategori
Sertifikat <G>
jotka on esitetty asiakirjassa
Sertifikaatin <C>
13 *
<D>
) de acordo
<F>
.
(Módulo aplicado
<E>
Certificado <C>
e com o parecer positivo de
de acordo com o
** tal como estabelecido no Ficheiro Técnico de Construção
) conformément au
. Se reporter également
<F>
<H>
(Module appliqué
<E>
. Catégorie de risque
positivement par
à la page suivante.
Certificat <G>
<E>
pagal
ir patvirtinta
<B>
<D>
ir kaip teigiamai nuspręsta
.
<A>
kaip nustatyta
Sertifikatą <C>
** kaip nurodyta Techninėje konstrukcijos byloje
22 *
în conformitate
. Patrz
<B>
<H>
şi apreciat pozitiv de
<A>
. Kategoria zagrożenia
Świadectwem <G>
aşa cum este stabilit în
także następna strona.
ze
18 *
on
mukaisesti.
<E>
ja jotka
<D>
Sertifikaatin <G>
)
<F>
. Katso myös seuraava sivu.
<H>
Vaaraluokka
hyväksynyt (Sovellettu moduli
** jotka on esitetty Teknisessä Asiakirjassa
<B>
. Consultar também
<H>
. Categoria de risco
и в со ответствии с полож ительным решение м
<A>
Certificado <G>
как указано в
com o
a página seguinte.
09 *
en in orde
<D>
<B>
.
en positief beoordeeld door
<A>
Certificaat <C>
overeenkomstig
zoals vermeld in
** zoals vermeld in het Technisch Constructiedossier
04 *
. Rizikos kategorija
<G>
) pagal pažymėjimą
<F>
. Taip pat žiūrėkite ir kitą puslapį.
<H>
(taikomas modulis
<D>
.
Certificatul <C>
cu
** conform celor stabilite în Dosarul tehnic de construcţie
v souladu
<B>
a pozitivně zjištěno
.
<A>
osvědčením <C>
s
jak bylo uvedeno v
14 *
и в соответствии
<D>
.
Свидетельству <C>
согласно
** как указано в Досье технического топкования
) overeenkomstig
<F>
. Zie ook de volgende pagina.
<H>
(Toegepaste module
. Risicocategorie
<E>
Certificaat <G>
bevonden door
.
pozitīvajam
<E>
sertifikāts <G>
, atbilstoši
<D>
pozitīvajam vērtējumam saskaņā
), ko apliecina
<B>
<F>
.
un atbilstoši
<A>
sertifikātu <C>
lēmumam (piekritīgā sadaĮa:
ar
kā norādīts
** kā noteikts tehniskajā dokumentācijā
23 *
) în conformitate
. Consultaţi de asemenea
<F>
<H>
(Modul aplicat
<E>
. Categorie de risc
Certificatul <G>
şi apreciate pozitiv de
pagina următoare.
cu
.
a pozitivně
<D>
osvědčením <G>
) v souladu s
<F>
. Viz také následující strana.
<H>
(použitý modul
<E>
Kategorie rizik
zjištěno
** jak bylo uvedeno v souboru technické konstrukce
) согласно
<F>
. Также смотрите
<H>
(Прикладной модуль
<E>
. Категория риска
с положительным решением
следующую страницу.
Свидетельству <G>
<B>
<D>
) según
<F>
.
(Modulo aplicado
<E>
y es valorado positivamente por
<A>
Certificado <C>
de acuerdo con el
y juzgado positivamento por
como se establece en
** tal como se expone en el Archivo de Construcción Técnica
05 *
je pooblaščen za sestavo datoteke s tehnično mapo.
on volitatud koostama tehnilist dokumentatsiooni.
е оторизирана да състави Акта за техническа конструкция.
yra įgaliota sudaryti šį techninės konstrukcijos failą.
#
#
#
#
#
DICz
DICz
DICz
DICz
19 ***
20 ***
21 ***
22 ***
. Skat. arī nākošo lappusi.
<H>
Riska kategorija
má oprávnění ke kompilaci souboru technické konstrukce.
#
jogosult a műszaki konstrukciós dokumentáció összeállítására.
#
on valtuutettu laatimaan Teknisen asiakirjan.
je ovlašten za izradu Datoteke o tehničkoj konstrukciji.
#
#
#
DICz
Společnost DICz
DICz
A DICz
13 ***
14 ***
15 ***
16 ***
уполномочена составить Комплект технической документации.
#
είναι εξουσιοδοτημένη να συντάξει τον Τεχνικό φάκελο κατασκευής.
está autorizada a compilar a documentação técnica de fabrico.
#
#
er autoriseret til at udarbejde de tekniske konstruktionsdata.
#
#
Η DICz
A DICz
Компания DICz
DICz
07 ***
08 ***
09 ***
10 ***
. Consulte también
<H>
. Categoría de riesgo
is authorised to compile the Technical Construction File.
hat die Berechtigung die Technische Konstruktionsakte zusammenzustellen.
est autorisé à compiler le Dossier de Construction Technique.
is bevoegd om het Technisch Constructiedossier samen te stellen.
#
#
#
#
#
DICz
DICz
DICz
DICz
01 ***
02 ***
03 ***
Certificado <G>
la siguiente página.
el
2P427092-11H
04 ***
je oprávnená vytvoriť súbor technickej konštrukcie.
#
ir autorizēts sastādīt tehnisko dokumentāciju.
Teknik Yapı Dosyasını derlemeye yetkilidir.
#
DICz
Spoločnosť DICz
DICz
23 ***
24 ***
25 ***
ma upoważnienie do zbierania i opracowywania dokumentacji konstrukcyjnej.
este autorizat să compileze Dosarul tehnic de construcţie.
#
DICz
DICz
17 ***
18 ***
är bemyndigade att sammanställa den tekniska konstruktionsfilen.
har tillatelse til å kompilere den Tekniske konstruksjonsfilen.
#
DICz
DICz
11 * **
12 ***
está autorizado a compilar el Archivo de Construcción Técnica.
è autorizzata a redigere il File Tecnico di Costruzione.
#
DICz
DICz
DICz = Daikin Industries Czech Republic s.r.o.
05 ***
06 ***
#
CE - ATITIKTIES-DEKLARACIJA
<K> PS 41.7 bar
<L> TSmin -35 °C
<M> TSmax 63.8 °C
<N> R32
<P> 41.7 bar
<Q> VINÇOTTE nv
JAN OLIESLAGERSLAAN, 35
1800 VILVOORDE, BELGIUM
CE - ATBILSTĪBAS-DEKLARĀCIJA
CE - VYHLÁSENIE-ZHODY
CE - UYGUNLUK-BEYANI
CE - IZJAVA O SKLADNOSTI
CE - VASTAVUSDEKLARATSIOON
CE - ДЕКЛАРАЦИЯ-ЗА-ϹЪОТВЕТСТВИЕ
CE - IZJAVA-O-USKLAĐENOSTI
CE - MEGFELELŐSÉGI-NYILATKOZAT
CE - DEKLARACJA-ZGODNOŚCI
CE - DECLARAŢIE-DE-CONFORMITATE
ankstesnio puslapio tęsinys:
t
22
nadaljevanje s prejšnje strani:
o
19
nastavak s prethodne stranice:
y
15
iepriekšējās lappuses turpinājums:
v
23
eelmise lehekülje järg:
x
20
folytatás az előző oldalról:
h
16
pokračovanie z predchádzajúcej strany:
k
24
продължение от предходната страница:
b
21
ciąg dalszy z poprzedniej strony:
m
17
önceki sayfadan devam:
w
25
Deklaratsiooni alla kuuluvate mudelite disainispetsifikatsioonid:21Проектни спецификации на моделите, за които се отнася декларацията:22Konstrukcinės specifikacijos modelių, kurie susiję su šia deklaracija:23To modeļu dizaina specifikācijas, uz kurām attiecas šī deklarācija:24Konštrukčné špecifikácie modelu, ktorého sa týka toto vyhlásenie:25Bu bildirinin ilgili olduğu modellerin Tasarım Özellikleri:
20
continuarea paginii anterioare:
r
18
Tätä ilmoitusta koskevien mallien rakennemäärittely:14Specifikace designu modelů, ke kterým se vztahuje toto prohlášení:15Specifikacije dizajna za modele na koje se ova izjava odnosi:16A jelen nyilatkozat tárgyát képező modellek tervezési jellemzői:17Specyfikacje konstrukcyjne modeli, których dotyczy deklaracja:18Specificaţiile de proiectare ale modelelor la care se referă această declaraţie:19Specifikacije tehničnega načrta za modele, na katere se nanaša ta deklaracija:
13
(bar)
<K>
• Maximálny povolený tlak (PS):
24
(bar)
<K>
• Maksimalni dovoljeni tlak (PS):
19
(bar)
<K>
• Najveći dopušten tlak (PS):
15
• Minimálna/maximálna povolená teplota (TS*):
• Minimalna/maksimalna dovoljena temperatura (TS*):
• Najniža/najviša dopuštena temperatura (TS*):
(°C)
<L>
* TSmin: Minimálna teplota na nízkotlakovej strane:
* TSmax: Nasýtená teplota korešpondujúca s maximálnym
(°C)
<L>
* TSmax: Nasičena temperatura, ki ustreza maksimalnemu
* TSmin: Minimalna temperatura na nizkotlačni strani:
(°C)
<L>
* TSmin: Najniža temperatura u području niskog tlaka:
* TSmax: Standardna temperatura koja odgovara najvećem
(°C)
<M>
povoleným tlakom (PS):
(°C)
<M>
dovoljenemu tlaku (PS):
(°C)
<M>
dopuštenom tlaku (PS):
<N>
• Chladivo:
<N>
• Hladivo:
<N>
• Rashladno sredstvo:
(bar)
<P>
• Nastavenie tlakového poistného zariadenia:
(bar)
<P>
• Nastavljanje varnostne naprave za tlak:
(bar)
<P>
• Postavke sigurnosne naprave za tlak:
• Výrobné číslo a rok výroby: nájdete na výrobnom štítku modelu
• Tovarniška številka in leto proizvodnje: glejte napisno ploščico
• Proizvodni broj i godina proizvodnje: pogledajte natpisnu pločicu
(bar)
<K>
• İzin verilen maksimum basınç (PS):
• İzin verilen minimum/maksimum sıcaklık (TS*):
25
(bar)
<K>
• Maksimaalne lubatud surve (PS):
• Minimaalne/maksimaalne lubatud temperatuur (TS*):
20
(bar)
<K>
modela
• Legnagyobb megengedhető nyomás (PS):
16
(°C)
<L>
* TSmin: Düşük basınç tarafındaki minimum sıcaklık:
(°C)
<L>
* TSmin: Minimaalne temperatuur madalsurve küljel:
• Legkisebb/legnagyobb megengedhető hőmérséklet (TS*):
(°C)
<M>
sıcaklığı:
* TSmax: İzin verilen maksimum basınca (PS) karşı gelen doyma
(°C)
<M>
temperatuur:
* TSmax: Maksimaalsele lubatud survele (PS) vastav küllastunud
(°C)
<L>
oldalon:
* TSmin: Legkisebb megengedhető hőmérséklet a kis nyomású
(bar)
<P>
<N>
• Soğutucu:
• Basınç emniyet düzeninin ayarı:
(bar)
<P>
<N>
• Surve turvaseadme seadistus:
• Jahutusaine:
(°C)
<M>
telítettségi hőmérséklet:
* TSmax: A legnagyobb megengedhető nyomásnak (PS) megfelelő
• İmalat numarası ve imalat yılı: modelin ünite plakasına bakın
(bar)
<K>
• Максимално допустимо налягане (PS):
• Минимално/максимално допустима температура (TS*):
• Tootmisnumber ja tootmisaasta: vaadake mudeli andmeplaati
21
(bar)
<P>
<N>
• Gyártási szám és gyártási év: lásd a berendezés adattábláján
• A túlnyomás-kapcsoló beállítása:
• Hűtőközeg:
* TSmin: Минимална температура от страната на ниското
(bar)
<K>
• Maksymalne dopuszczalne ciśnienie (PS):
17
(°C)
<L>
налягане:
• Minimalna/maksymalna dopuszczalna temperatura (TS*):
(°C)
<M>
максимално допустимото налягане (PS):
* TSmax: Температура на насищане, съответстваща на
<L>
(°C)
* TSmin: Minimalna temperatura po stronie niskociśnieniowej:
(bar)
<P>
<N>
•Охладител:
• Настройка на предпазното устройство за налягане:
(°C)
<M>
dopuszczalnemu ciśnieniu (PS):
* TSmax: Temperatura nasycenia odpowiadająca maksymalnemu
на модела
• Фабричен номер и година на производство: вижте табелката
(bar)
<P>
<N>
• Czynnik chłodniczy:
• Nastawa ciśnieniowego urządzenia bezpieczeństwa:
(bar)
<K>
• Maksimalus leistinas slėgis (PS):
22
• Numer fabryczny oraz rok produkcji: patrz tabliczka znamionowa
(°C)
<L>
* TSmin: Minimali temperatūra žemo slėgio pusėje:
• Minimali/maksimali leistina temperatūra (TS*):
(bar)
<K>
modelu
• Presiune maximă admisibilă (PS):
18
<Q>
ı ve adresi:
<Q>
ş kuruluşun ad
ı
ğerlendirilen Onaylanm
Názov a adresa certifikačného úradu, ktorý kladne posúdil zhodu
so smernicou pre tlakové zariadenia:
Basınçlı Teçhizat Direktifine uygunluk hususunda olumlu olarak
de
24
25
<Q>
с Директивата за оборудване под налягане:
Nazwa i adres Jednostki notyfikowanej, która wydała pozytywną
17
<Q>
Atsakingos institucijos, kuri davė teigiamą sprendimą pagal
slėginės įrangos direktyvą pavadinimas ir adresas:
22
<Q>
opinię dotyczącą spełnienia wymogów Dyrektywy dot. Urządzeń
Ciśnieniowych:
<Q>
Sertifikācijas institūcijas, kura ir devusi pozitīvu slēdzienu par
atbilstību Spiediena lekārtu Direktīvai, nosaukums un adrese:
23
<Q>
Denumirea şi adresa organismului notificat care a apreciat pozitiv
conformarea cu Directiva privind echipamentele sub presiune:
18
(°C)
<L>
(bar)
(bar)
<K>
• Maksimālais pieļaujamais spiediens (PS):
23
(bar)
<P>
• Reglarea dispozitivului de siguranţă pentru presiune:
• Minimālā/maksimālā pieļaujamā temperatūra (TS*):
• Numărul de fabricaţie şi anul de fabricaţie: consultaţi placa de
(°C)
<M>
<N>
pieļaujamo spiedienu (PS):
* TSmax: Piesātinātā temperatūra saskaņā ar maksimālo
* TSmin: Minimālā temperatūra zemā spiediena pusē:
• Dzesinātājs:
identificare a modelului
<P>
(°C)
<N>
<M>
(PS):
<L>
* TSmin: Temperatură minimă pe partea de presiune joasă:
plokštelę
• Gaminio numeris ir pagaminimo metai: žiūrėkite modelio pavadinimo
• Apsauginio slėgio prietaiso nustatymas:
• Šaldymo skystis:
(°C)
<M>
<N>
(°C)
admisibile (PS):
* TSmax: Temperatură de saturaţie corespunzând presiunii maxime
• Agent frigorific:
* TSmax: Prisotinta temperatūra, atitinkamti maksimalų leistiną slėgį
• Temperatură minimă/maximă admisibilă (TS*):
(bar)
<P>
izgatavotājuzņēmuma plāksnītie
• Spiediena drošības ierīces iestatīšana:
• Izgatavošanas numurs un izgatavošanas gads: skat. modeļa
Ime in naslov organa za ugotavljanje skladnosti, ki je pozitivno
19
Název a adresa informovaného orgánu, který vydal pozitivní
14
<Q>
ocenil združljivost z Direktivo o tlačni opremi:
<Q>
posouzení shody se směrnicí o tlakových zařízeních:
Teavitatud organi, mis hindas Surveseadmete Direktiiviga
20
Naziv i adresa prijavljenog tijela koje je donijelo pozitivnu
15
<Q>
ühilduvust positiivselt, nimi ja aadress:
Наименование и адрес на упълномощения орган, който
се е произнесъл положително относно съвместимостта
21
<Q>
<Q>
prosudbu o usklađenosti sa Smjernicom za tlačnu opremu:
A nyomástartó berendezésekre vonatkozó irányelvnek való
megfelelőséget igazoló bejelentett szervezet neve és címe:
16
fortsettelse fra forrige side:
jatkoa edelliseltä sivulta:
pokračování z předchozí strany:
n
j
CE - ERKLÆRING OM-SAMSVAR
CE - ILMOITUS-YHDENMUKAISUUDESTA
CE - PROHLÁŠENÍ-O-SHODĚ
CE - DECLARAÇÃO-DE-CONFORMIDADE
CE - ЗАЯВЛЕНИЕ-О-СООТВЕТСТВИИ
CE - OVERENSSTEMMELSESERKLÆRING
CE - DECLARACION-DE-CONFORMIDAD
CE - DICHIARAZIONE-DI-CONFORMITA
CE - ΔHΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ
CE - DECLARATION-OF-CONFORMITY
CE - KONFORMITÄTSERKLÄRUNG
CE - DECLARATION-DE-CONFORMITE
12
continuação da página anterior:
p
CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE
08
continuación de la página anterior:
e
05
continuation of previous page:
a
CE - CONFORMITEITSVERKLARING
01
13
продолжение предыдущей страницы:
u
09
continua dalla pagina precedente:
i
06
Fortsetzung der vorherigen Seite:
d
02
c
14
fortsat fra forrige side:
q
10
συνέχεια από την προηγούμενη σελίδα:
g
07
suite de la page précédente:
f
03
fortsättning från föregående sida:
s
11
vervolg van vorige pagina:
l
04
Προδιαγραφές Σχεδιασμού των μοντέλων με τα οποία σχετίζεται η δήλωση:08Especificações de projecto dos modelos a que se aplica esta declaração:09Проектные характеристики моделей, к которым относится настоящее
заявление:10Typespecifikationer for de modeller, som denne erklæring vedrører:11Designspecifikationer för de modeller som denna deklaration gäller:12Konstruksjonsspesifikasjoner for de modeller som berøres av denne deklarasjonen:
07
Design Specifications of the models to which this declaration relates:02Konstruktionsdaten der Modelle auf die sich diese Erklärung bezieht:03Spécifications de conception des modèles auxquels se rapporte cette déclaration:04Ontwerpspecificaties van de modellen waarop deze verklaring betrekking heeft:05Especificaciones de diseño de los modelos a los cuales hace referencia esta
01
declaración:06Specifiche di progetto dei modelli cui fa riferimento la presente dichiarazione:
(bar)
<K>
• Maks. tilladt tryk (PS):
10
(bar)
<K>
• Pressione massima consentita (PS):
06
(bar)
<K>
• Maximum allowable pressure (PS):
01
(bar)
<P>
• Inställning för trycksäkerhetsenhet:
• Tillverkningsnummer och tillverkningsår: se modellens namnplåt
(°C)
<M>
επιτρεπόμενη πίεση (PS):
<N>
•Ψυκτικό:
(Bar)
<P>
<N>
• Einstellung der Druck-Schutzvorrichtung:
• Kältemittel:
(bar)
<K>
• Maksimalt tillatt trykk (PS):
12
(bar)
<P>
• Ρύθμιση της διάταξης ασφάλειας πίεσης:
• Herstellungsnummer und Herstellungsjahr: siehe Typenschild
(°C)
<L>
(°C)
<M>
<N>
(PS):
* TSmin: Minimumstemperatur på lavtrykkssiden:
* TSmax: Metningstemperatur i samsvar med maksimalt tillatt trykk
• Minimalt/maksimalt tillatt temperatur (TS*):
• Kjølemedium:
(°C)
<L>
(bar)
<K>
* TSmin: Temperatura mínima em baixa pressão:
αναγνώρισης του μοντέλου
• Temperaturas mínima e máxima permitidas (TS*):
• Pressão máxima permitida (PS):
• Αριθμός κατασκευής και έτος κατασκευής: ανατρέξτε στην πινακίδα
08
(°C)
<L>
(bar)
<K>
* TSmin: température minimum côté basse pression:
* TSmax: température saturée correspondant à la pression
des Modells
• Température minimum/maximum admise (TS*):
• Pression maximale admise (PS):
03
(bar)
<P>
• Innstilling av sikkerhetsanordning for trykk:
* TSmax: Temperatura de saturação correspondente à pressão
(°C)
<M>
maximale admise (PS):
• Produksjonsnummer og produksjonsår: se modellens merkeplate
(°C)
<M>
máxima permitida (PS):
<N>
• Réfrigérant:
(bar)
<K>
• Suurin sallittu paine (PS):
• Pienin/suurin sallittu lämpötila (TS*):
13
(bar)
<P>
<N>
• Regulação do dispositivo de segurança da pressão:
• Refrigerante:
(bar)
<P>
• Réglage du dispositif de sécurité de pression:
• Numéro de fabrication et année de fabrication: se reporter à la
(°C)
<L>
(°C)
<M>
<N>
kyllästyslämpötila:
* TSmax: Suurinta sallittua painetta (PS) vastaava
* TSmin: Alhaisin matalapainepuolen lämpötila:
• Kylmäaine:
(бар)
<K>
da unidade
• Минимально/Максимально допустимая температура (TS*):
• Максимально допустимое давление (PS):
• Número e ano de fabrico: consultar a placa de especificações
09
(°C)
<L>
(bar)
<K>
* TSmin: Minimumtemperatuur aan lagedrukzijde:
plaquette signalétique du modèle
• Maximaal toelaatbare druk (PS):
• Minimaal/maximaal toelaatbare temperatuur (TS*):
04
(bar)
(bar)
<K>
<P>
• Valmistusnumero ja valmistusvuosi: katso mallin nimikilpi
• Varmuuspainelaitteen asetus:
• Maximální přípustný tlak (PS):
• Minimální/maximální přípustná teplota (TS*):
14
(°C)
<M>
(°C)
<L>
допустимому давлению (PS):
давления:
* TSmax: Температура кипения, соответствующая максимально
* TSmin: Минимальная температура на стороне низкого
(°C)
<M>
(bar)
<P>
<N>
maximaal toelaatbare druk (PS):
* TSmax: Verzadigde temperatuur die overeenstemt met de
• Koelmiddel:
• Instelling van drukbeveiliging:
(°C)
<L>
* TSmax: Saturovaná teplota odpovídající maximálnímu
* TSmin: Minimální teplota na nízkotlaké straně:
(бар)
<P>
<N>
• Настройка устройства защиты по давлению:
•Хладагент:
(bar)
<K>
• Fabricagenummer en fabricagejaar: zie naamplaat model
• Presión máxima admisible (PS):
05
(°C)
<M>
přípustnému tlaku (PS):
• Заводской номер и год изготовления: смотрите паспортную
• Temperatura mínima/máxima admisible (TS*):
<N>
• Chladivo:
табличку модели
(°C)
<L>
* TSmin: Temperatura mínima en el lado de baja presión:
(bar)
<P>
• Nastavení bezpečnostního tlakového zařízení:
* TSmax: Temperatura saturada correspondiente a la presión
• Výrobní číslo a rok výroby: viz typový štítek modelu
(°C)
<M>
máxima admisible (PS):
(bar)
<P>
<N>
• Ajuste del presostato de seguridad:
• Refrigerante:
• Número de fabricación y año de fabricación: consulte la placa
<Q>
<Q>
<Q>
<Q>
Navn og adresse på bemyndiget organ, der har foretaget en
positiv bedømmelse af, at udstyret lever op til kravene i PED
(Direktiv for Trykbærende Udstyr):
Namn och adress för det anmälda organ som godkänt
uppfyllandet av tryckutrustningsdirektivet:
Navn på og adresse til det autoriserte organet som positivt
bedømte samsvar med direktivet for trykkutstyr (Pressure
Equipment Directive):
Sen ilmoitetun elimen nimi ja osoite, joka teki myönteisen
10
11
<Q>
<Q>
Nome e indirizzo dell’Ente riconosciuto che ha riscontrato la
conformità alla Direttiva sulle apparecchiature a pressione:
Όνομα και διεύθυνση του Κοινοποιημένου οργανισμού που
απεφάνθη θετικά για τη συμμόρφωση προς την Οδηγία
Εξοπλισμών υπό Πίεση:
06
07
<Q>
<Q>
de especificaciones técnicas del modelo
Name and address of the Notified body that judged positively
on compliance with the Pressure Equipment Directive:
Name und Adresse der benannten Stelle, die positiv unter
Einhaltung der Druckanlagen-Richtlinie urteilte:
Nom et adresse de l’organisme notifié qui a évalué positivement
01
03
02
12
Nome e morada do organismo notificado, que avaliou
08
<Q>
la conformité à la directive sur l’équipement de pression:
<Q>
favoravelmente a conformidade com a directiva sobre
equipamentos pressurizados:
<Q>
Naam en adres van de aangemelde instantie die positief geoordeeld
heeft over de conformiteit met de Richtlijn Drukapparatuur:
04
13
Название и адрес органа технической экспертизы,
09
Nombre y dirección del Organismo Notificado que juzgó
05
päätöksen painelaitedirektiivin noudattamisesta:
принявшего положительное решение о соответствии
Tetsuya Baba
Managing Director
<Q>
Директиве об оборудовании под давлением:
<Q>
positivamente el cumplimiento con la Directiva en materia de
Equipos de Presión:
2P427092-11H
Pilsen, 2nd of May 2017
(°C)
(bar)
<P>
• Indstilling af tryksikringsudstyr:
(bar)
<P>
• Impostazione del dispositivo di controllo della pressione:
(bar)
<P>
• Setting of pressure safety device:
• Produktionsnummer og fremstillingsår: se modellens fabriksskilt
• Numero di serie e anno di produzione: fare riferimento alla targhetta
• Manufacturing number and manufacturing year: refer to model
<L>
(bar)
<K>
* TSmin: Minimumtemperatur på lågtryckssidan:
* TSmax: Mättnadstemperatur som motsvarar maximalt tillåtet tryck
• Min/max tillåten temperatur (TS*):
• Maximalt tillåtet tryck (PS):
11
(bar)
<K>
del modello
* TSmin: Ελάχιστη θερμοκρασία για την πλευρά χαμηλής πίεσης:
• Mέγιστη επιτρεπόμενη πίεση (PS):
• Ελάχιστη/μέγιστη επιτρεπόμενη θερμοκρασία (TS*):
07
(°C)
<L>
(Bar)
<K>
* TSmin: Mindesttemperatur auf der Niederdruckseite:
nameplate
• Minimal/maximal zulässige Temperatur (TS*):
• Maximal zulässiger Druck (PS):
02
(°C)
<M>
<N>
(PS):
• Köldmedel:
(°C)
<L>
* TSmax: Κορεσμένη θερμοκρασία που αντιστοιχεί με τη μέγιστη
(°C)
<M>
(PS) entspricht:
* TSmax: Sättigungstemperatur die dem maximal zulässigen Druck
(°C)
<L>
(°C)
<N>
<M>
* TSmax: Mættet temperatur svarende til maks. tilladte tryk (PS):
* TSmin: Min. temperatur på lavtrykssiden:
• Kølemiddel:
• Min./maks. tilladte temperatur (TS*):
(°C)
<L>
(°C)
<M>
<N>
massima consentita (PS):
* TSmin: temperatura minima nel lato di bassa pressione:
* TSmax: temperatura satura corrispondente alla pressione
• Temperatura minima/massima consentita (TS*):
• Refrigerante:
(°C)
<L>
(°C)
<M>
<N>
allowable pressure (PS):
* TSmin: Minimum temperature at low pressure side:
* TSmax: Saturated temperature corresponding with the maximum
• Minimum/maximum allowable temperature (TS*):
• Refrigerant:
Safety precautions
Read the precautions in this manual
carefully before operating the unit.
This appliance is filled with R32.
WARNING
The unit is accompanied with the label below. Please read the following instructions carefully.
WARNING
1)
2)
3) 4) 5)
• When the refrigeration circuit has a leak, do not execute pump down with the compressor.
• Use recovery system into separate cylinder.
• Warning, explosive hazard exists when executing pump down.
• Pump down with compressor can lead to self-combustion due to air entering during pump
down.
Used symbols:
1)
Warning sign (ISO 7010 – W001)
2)
Warning, Explosive material (ISO 7010 – W002)
3)
Read Operator’s manual (ISO 7000 – 0790)
4)
Operator’s manual; operating instructions (ISO 7000 – 1641)
5)
Service indicator; read technical manual (ISO 7000 – 1659)
• The precautions described herein are classified as WARNING and CAUTION. They both contain important
information regarding safety. Be sure to observe all precautions without fail.
• Meaning of WARNING and CAUTION notices
WARNING .... Failure to follow these instructions properly may result in personal injury or loss of life.
CAUTION .....Failure to observe these instructions properly may result in property damage or personal injury, which
may be serious depending on the circumstances.
• The safety marks shown in this manual have the following meanings:
Be sure to follow the instructions. Be sure to establish an earth connection. Never attempt.
• After completing installation, conduct a trial operation to check for faults and explain to the customer how to operate
the air conditioner and take care of it with the aid of the operation manual.
• The original instructions are written in English. All other languages are translations of the original instructions.
WARNING
• Ask your dealer or qualified personnel to carry out installation work.
Do not attempt to install the air conditioner yourself. Improper installation may result in water leakage, electric shocks or fire.
• Install the air conditioner in accordance with the instructions in this installation manual.
Improper installation may result in water leakage, electric shocks or fire.
• Only use accessories, optional equipment and spare parts made or approved by Daikin.
Failure to use the specified parts may result in the unit falling, water leakage, electric shocks or fire.
• Install the air conditioner on a foundation strong enough to withstand the weight of the unit.
A foundation of insufficient strength may result in the equipment falling and causing injury.
• Electrical work must be performed in accordance with relevant local and national regulations and with instructions
in this installation manual. Be sure to use a dedicated power supply circuit only.
Insufficiency of power circuit capacity and improper workmanship may result in electric shocks or fire.
• Use a cable of suitable length.
Do not use tapped wires or an extension lead, as this may cause overheating, electric shocks or fire.
• Make sure that all wiring is secured, the specified wires are used, and that there is no strain on the terminal
connections or wires.
Improper connections or securing of wires may result in abnormal heat build-up or fire.
• When wiring the power supply and connecting the wiring between the indoor and outdoor units, position the wires
so that the service cover can be securely fastened.
Improper positioning of the service cover may result in electric shocks, fire or over heating terminals.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• If refrigerant gas leaks during installation, ventilate the area immediately.
Toxic gas may be produced if the refrigerant gas comes into contact with fire.
1 English
Safety precautions
• After completing installation, check for refrigerant gas leakage.
Toxic gas may be produced if the refrigerant gas leaks into the room and comes into contact with a source of fire, such as a fan heater,
stove or cooker.
• When installing or relocating the air conditioner, be sure to bleed the refrigerant circuit to ensure it is free of air,
and use only the specified refrigerant (R32).
The presence of air or other foreign matter in the refrigerant circuit causes abnormal pressure rise, which may result in equipment damage
and even injury.
• During installation, attach the refrigerant piping securely before running the compressor.
If the refrigerant pipes are not attached and the stop valve is open when the compressor is run, air will be sucked in, causing abnormal
pressure in the refrigeration cycle, which may result in equipment damage and even injury.
• During pump-down, stop the compressor before removing the refrigerant piping.
If the compressor is still running and the stop valve is open during pump-down, air will be sucked in when the refrigerant piping is removed,
causing abnormal pressure in the refrigeration cycle, which may result in equipment damage and even injury.
• Be sure to earth the air conditioner.
Do not earth the unit to a utility pipe, lightning conductor or telephone earth lead. Imperfect earthing may result in electric shocks.
• Be sure to install an earth leakage breaker.
Failure to install an earth leakage breaker may result in electric shocks or fire.
• Do not use means to accelerate the defrosting process or to clean, other than those recommended by the
manufacturer.
• The appliance must be stored in a room without continuously operating ignition sources (for example: open
flames, an operating gas appliance or an operating electric heater).
• Do not pierce or burn.
• Be aware that refrigerants may not contain an odour.
• This appliance must be installed, operated and stored in a room larger than the minimum required floor area.
• Comply with national gas regulations.
CAUTION
• Do not install the air conditioner at any place where there is a danger of flammable gas leakage.
In the event of a gas leakage, build-up of gas near the air conditioner may cause a fire to break out.
• While following the instructions in this installation manual, install drain piping to ensure proper drainage
and insulate piping to prevent condensation.
Improper drain piping may result in indoor water leakage and property damage.
• Tighten the flare nut according to the specified method such as with a torque wrench.
If the flare nut is too tight, it may crack after prolonged use, causing refrigerant leakage.
• Make sure to provide for adequate measures in order to prevent that the outdoor unit be used as a shelter by small
animals.
Small animals making contact with electrical parts can cause malfunctions, smoke or fire. Please instruct the customer to keep the area around
the unit clean.
• The temperature of refrigerant circuit will be high, please keep the inter-unit wire away from copper pipes that are
not thermally insulated.
• This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for
commercial and household use by lay persons.
• Sound pressure level is less than 70 dB(A).
• Provide a logbook and machine card.
In accordance with the applicable legislation, it may be necessary to provide a logbook with the equipment containing at least: info on maintenance, repair work, results of tests, stand-by periods, …
• The following information shall be provided at an accessible place of the system:
-instructions for shutting down the system in case of an emergency
-name and address of fire department, police and hospital
-name, address and day & night telephone numbers for obtaining service.
In Europe, EN378 provides the necessary guidance for this logbook.
English 2
Accessories
CAUTION
● Construct a large canopy
● Construct a pedestal
Install the unit high enough off the
ground to prevent burying in snow.
Accessories supplied with the outdoor unit:
Installation Manual + R32 Manual
A Drain plugB
Reducer assembly
C
1
1
1
It is on the bottom of the packing case.
E Screw bag
Refrigerant charge label
F Drain cap (1) G Drain cap (2)H
Multilingual fluorinated greenhouse gases label
It is on the bottom of the packing case.
It is on the bottom of the packing case.
D
(For fixing electrical wire anchor bands)
1
It is on the bottom of the packing case.
1
1
6
3
Precautions for selecting the location
1) Choose a place solid enough to bear the weight and vibration of the unit, where the operation noise will not be amplified.
2) Choose a location where the hot air discharged from the unit or the operation noise will not cause a nuisance to the neighbours of
the user.
3) Avoid places near a bedroom and the like, so that the operation noise will cause no trouble.
4) There must be sufficient spaces for carrying the unit into and out of the site.
5) There must be sufficient space for air passage and no obstructions around the air inlet and the air outlet.
6) The site must be free from the possibility of flammable gas leakage in a nearby place.
7) Install units, power cords and inter-unit wire at least 3m away from television and radio sets. This is to prevent interference to
images and sounds. (Noises may be heard even if they are more than 3m away depending on radio wave conditions.)
8) In coastal areas or other places with salty atmosphere of sulfate gas, corrosion may shorten the life of the air conditioner.
9) Since water will flow from the drain of the outdoor unit, do not place under the unit anything which must be kept away from moisture.
NOTE
Cannot be installed hanging from ceiling or stacked.
When operating the air conditioner in a low outdoor ambient
temperature, be sure to follow the instructions described below.
• To prevent exposure to wind, install the outdoor unit with its suction
side facing the wall.
• Never install the outdoor unit at a site where the suction side may be
exposed directly to wind.
• To prevent exposure to wind, it is recommended to install a baffle
plate on the air discharge side of the outdoor unit.
• In heavy snowfall areas, select an installation site where the snow
will not affect the unit.
3 English
Indoor/outdoor unit
CAUTION
Caulk
pipe hole
gap
with putty.
Cut thermal insulation
pipe to an appropriate
length and wrap it with
tape, making sure that no
gap is left in the insulation
pipe’s cut line.
Wrap the insulation
pipe with the finishing
tape from bottom to top.
250mm from wall
Allow space for piping
and electrical servicing.
If there is the danger of the unit falling
or overturning, fix the unit with
foundation bolts, or with wire or other
means.
If the location does not have good
drainage, place the unit on a level
mounting base (or a plastic pedestal).
Install the outdoor unit in a level
position. Failure to do so may result in
water leakage or accumulation.
Level mounting
base (optional parts)
(Foot bolt-
hole centres)
600
Clamping material
Insulation tube
Service cover
Tape
Also insulate the connection on the outdoor unit.
Use tape or insulating material on all connections
to prevent air from getting in between the copper
piping and the insulation tube.
Be sure to do this if the outdoor unit is installed
above.
(Foot bolt-hole
centres)
353
Stop valve cover
Allow 300mm of
work space below
the ceiling surface.
unit: mm
Max. allowable refrigerant charge amount
3MXM40* 2.2kg
3(A)MXM52* 2.2kg
3MXM68* 2.4kg
4MXM68* 2.6kg
4MXM80* 3.2kg
5MXM90* 3.3kg
Refrigerant piping must be kept to
a minimum.
3MXM40* 4.7m
2
3(A)MXM52* 4.7m
2
3MXM68* 5.5m
2
4MXM68* 6.5m
2
4MXM80* 9.8m
2
5MXM90* 10.4m
2
Minimum floor area for installation
Refrigerant piping must
be protected from
physical damage.
Install a plastic cover or
equivalent.
installation drawings
For installation of the indoor units, refer to the installation manual which was provided with the units.
(The diagram shows a wall-mounted indoor unit.)
• Do not connect the embedded branch piping and the outdoor unit when only carrying out piping work without connecting the
indoor unit in order to add another indoor unit later.
Make sure no dirt or moisture gets into either side of the embedded branch piping.
See “6. Refrigerant piping work” on page 11 for details.
• It is impossible to connect the indoor unit for one room only. Be sure to connect at least 2 rooms.
NOTE:
The DHW generator for Multi or the Hybrid for Multi are considered as one room connection.
For the correct combination see the combination table and the installation manual of the DHW generator for Multi or the Hybrid
for Multi.
English 4
Installation
: Use a reducer to connect pipes.
: Use No. 2 and 4 reducers.
: Use No. 5 and 6 reducers.
: Use No. 1 and 3 reducers.
Refer to “How to Use Reducers” on page 12 for information on reducer numbers and their shapes.
• Install the unit horizontally.
• The unit may be installed directly on a concrete verandah or a solid place if drainage is good.
• If the vibration may possibly be transmitted to the building, use a vibration-proof rubber (field supply).
1. Connections (connection port)
Install the indoor unit according to the table below, which shows the relationship between the class of indoor unit and the
corresponding port.
The total indoor unit class that can be connected to this unit:
Heat pump type: 3MXM40* - Up to 7.0 kW 4MXM68* - Up to 11.0 kW
3MXM52* - Up to 9.0 kW 4MXM80* - Up to 14.5 kW
3AMXM52* - Up to 9.0 kW 5MXM90* - Up to 15.6 kW
3MXM68* - Up to 11.0 kW
NOTE:
• For the DHW generator for Multi use the same reducer as for the 20 class indoor unit.
• For the Hybrid for Multi see the indoor installation manual for a correct capacity class and the applicable reducer.
5 English
Precautions on installation
20
Wall facing one side
Side view
More than 100
Direction
of air
More than 350
1200
or less
Walls facing two sides
Top view
More than 50 More than 50
More
than 100
More
than 350
unit: mm
Walls facing three sides
Top view
More than 50
More than 100
More than 350
• Check the strength and level of the installation ground so that the unit will not cause any operating vibration or noise after installed.
• In accordance with the foundation drawing in fix the unit securely by means of the foundation bolts. (Prepare 4 sets of M8 or M10
foundation bolts, nuts and washers each which are available on the market.)
• It is best to screw in the foundation bolts until their ends are 20mm from the foundation surface.
Outdoor unit installation guideline
• Where a wall or other obstacle is in the path of outdoor unit’s inlet or outlet airflow, follow the installation guidelines below.
• For any of the below installation patterns, the wall height on the exhaust side should be 1200mm or less.
English 6
Selecting a location for installation of the Indoor units
• The maximum allowable length of refrigerant piping, and the maximum allowable height difference between the outdoor and
indoor units, are listed below.
(The shorter the refrigerant piping, the better the performance. Connect so that the piping is as short as possible. Shortest allow-
able length per room is 3m.)
Outdoor unit capacity class
Piping to each indoor unit 25 m max. 25 m max. 25 m max. 25 m max. 25 m max. 25 m max.
Total length of piping between all units 50 m max. 50 m max. 50 m max. 60m max. 70m max. 75m max.
Indoor Unit
Level
difference:
15m max.
Level
difference:
7.5m max.
3MXM40*
Outdoor Unit
3MXM52*
3AMXM52*
Level
difference:
15m max.
3MXM68* 4MXM68* 4MXM80* 5MXM90*
Level
difference:
7.5m max.
Outdoor Unit
Indoor Unit
If the outdoor unit is positioned higher than the
indoor units.
If the outdoor unit is positioned otherwise.
(If lower than one or more indoor units)
NOTE:
For the DHW generator for Multi and the Hybrid for Multi see the indoor installation manual to confirm the specific installation
requirements for the allowable length and the maximum allowable height difference.
7 English
Loading...