Dahlen Fermatic User Manual

Product presentation

Fermatic

The fermatic Prover, Retarder-Prover

and Freezer-Prover range put an end to

those early and expensive, tiring hours

in the morning.

Start the next day´s bake during the af-

ternoon and evening, and roll in the racks

with the products straight into Fermatic.

The proving is then automatically con-

trolled so that you can have the nished

products exactly when you want them.

Prepare
baking in
no time

We have designed Fermatic with im-

maculate, simple lines so that it´s easier

to keep clean in and around the proving

room. Stainless steel both inside and out

makes Fermatic hard-wearing, reliable

and practically maintenance free.

User endly

The proving process is controlled by Sveba-Dahlen’s F-panel that is
very user friendly. The smooth panel is easy to keep clean.

The doors have ergonomic handles extending the full length of the door
sides. They are easy to open, and close themselves. Big windows and
interior lighting ensure the best possible overwiew and supervision of
the proving. The windows have insulated glass.

The proving process is controlled by Sveba-Dahlen’s
F-panel. This panel is very user friendly and gives clear indications
about times and temperatures during the entire proving process.

Efcient climator unit

The high capacity climator unit (for Retarder-prover and
Freezer-prover) works with a low air exchange. It ensures
reliable regulation of the temperature
during the impor tant ”rest phase”
between cooling and proving.
The cooling system is calculated
to achieve 0°C within one hour.
The cooling unit should be
placed separately.

Fermatic Options

Designed for function and quality

Fermatic is manufactured in stainless steel both inside and out for
maximum quality, for the longest servicelife and lowest maintenance
costs. The smooth surfaces are easy to clean.

Fermatic is designed as a module system, which makes installation
both quick and easy. Fermatic is available in three versions; prover,
retarder-prover and freezer-prover. The climator unit in the proving
cabinets has a high capacity for both humidity and heat, and the solid
insulation (80 mm thick) keeps the heat and the cold where it should be.
The door gaskets tightens effectively and the doors are self-closing.

The low ramp makes it easy to wheel in and out the racks. As a stan-

dard the Freezer-provers are delivered with heated oor, whereas this

is an option for the Provers and Retarder-provers.

Tunnel execution

Fermatic can be delivered in a tunnel execution for rational
handling of many racks. The Tunnel prover is loaded from
one side and unloaded from the other. The modular system
makes it easy to adjust the length of the prover according

to the requirements of the customer.

Stainless steel or

Heated oor

Standard execution for Fermatic Freezer-prover, optional
for Fermatic Prover and Retarder-prover.

2400

1000

1000, 1200,

1500 or 2000

2400

1500 1000, 1200,

or 1500

2400

1800

1000, 1200,

2100 or 2850

2400

2100

1000, 1500,

or 2400

Features & benets Fermatic

• Stainless steel exterior and interior

Maintains low temperature and is easy to keep clean.

• 80 mm polyurethane insulation.

Keeps the heat/cold inside the oven.

• F-panel for manual or pre-programmed control of the cooling,

freezing and proving processes.

The F-panel is easy to read and use.

• The design is based on a module system.

Makes installation rapid and simple.

• Insulation glass windows and interior light.

Good visibility through the doors.

• Automatic ush and drainage of steam generating unit.

Easy and convenient function.

• The doors have ergonomic handles extending the full length of the

door sides.

Easy to open, and self- closing.

• 34 mm heated oor.

For more effective proving.

• Temperature range +59° to -18°.

Covers most bakery products.

• Cooling agent R404.

Environmental friendly.

Panel

F-panel – electronic membrance foil panel.

Measurements

Function curve Fermatic Retarder-prover

0

+ 59

Start

Cooling Rest Prover
Process stage 1 Process stage 2 Process stage 3

0

- 18

Function curve Fermatic Freezer-prover

0

+ 59

Start

End
time

Time

End
time

- 18

The 100 cm wide provers are
equiped with one door. The 150,
180 and 210 cm wide provers are
equiped with two doors.

0

Time

Subject to alteration without notice

Technical information

Technical information Fermatic Prover/Retarder/Prover

Drawing Model External size Internal size Number of racks, max. rack size Cooling Heating
type mm mm power power
700x550 760x535 800x660 1040x760 kW kW

A
A
A
A
B
B
B

C

C
C
C
D
D

D

HiJ 100x100
HiJ 100x120
HiJ 100x150
HiJ 100x200 1000 x 2000 720 x 1750 3 3 2 – 6
HiJ 150x100
HiJ 150x120
HiJ 150x150
HiJ 180x100
HiJ 180x120
HiJ 180x210
HiJ 180x285
HiJ 210x100
HiJ 210x150
HiJ 210x240

1000 x 1000 720 x 750 1 1 – 3
1000 x 1200 720 x 950 1 1 1 – 3
1000 x 1500 720 x 1250 2 2 1 – 6

1500 x 1000 1240 x 750 2 2 1 – 6
1500 x 1200 1240 x 950 2 2 1 1 – 6
1500 x 1500 1240 x 1250 4 2 1 1 – 9
1800 x 1000 1540 x 750 2 2 2 1 – 6
1800 x 1200 1540 x 950 2 2 2 1 – 6
1800 x 2100 1540 x 1840 6 6 4 2 – 9
1800 x 2850 1540 x 2600 8 8 6 4 – 12
2100 x 1000 1840 x 1750 3 3 2 1 – 6
2100 x 1500 1840 x 1250 3 4 2 2 – 12
2100 x 2400 1840 x 2150 9 8 6 4 – 12

Fermatic Retarder/Prover

Drawing Model External size Internal size Number of racks, max. rack size Cooling Heating
type mm mm power power
700x550 760x535 800x660 1040x760 kW kW

A

HiK 100x100 1000 x 1000 720 x 750 1 1 1.0 3

A
A
A
B
B
B

C

C
C
C
D
D

D

HiK 100x120
HiK 100x150
HiK 100x200 1000 x 2000 720 x 1750 3 3 2 2.1 6
HiK 150x100
HiK 150x120
HiK 150x150
HiK 180x100 1800 x 1000 1540 x 750 2 2 2 1 1.7 6
HiK 180x120
HiK 180x210
HiK 180x285 1800 x 2850 1540 x 2600 8 8 6 4 4.3 12
HiK 210x100
HiK 210x150
HiK 210x240

1000 x 1200 720 x 950 1 1 1 1.0 3
1000 x 1500 720 x 1250 2 2 1 1.4 6

1500 x 1000 1240 x 750 2 2 1 1.7 6
1500 x 1200 1240 x 950 2 2 1 1 1.7 6
1500 x 1500 1240 x 1250 4 2 1 1 2.1 9

1800 x 1200 1540 x 950 2 2 2 1 2.1 6
1800 x 2100 1540 x 1840 6 6 4 2 3.3 9

2100 x 1000 1840 x 1750 3 3 2 1 2.1 6
2100 x 1500 1840 x 1250 3 4 2 2 3.3 12
2100 x 2400 1840 x 2150 9 8 6 4 4.3 12

Fermatic Freezer/Prover

Drawing Model External size Internal size Number of racks, max. rack size Cooling Heating
type mm mm power power
700x550 760x535 800x660 1040x760 kW kW

A
A
A
A
B
B
B

C

C
C
C
D
D

D

HiF 100x100
HiF 100x120
HiF 100x150
HiF 100x200 1000 x 2000 720 x 1750 3 3 2 2.4 6
HiF 150x100
HiF 150x120
HiF 150x150
HiF 180x100
HiF 180x120
HiF 180x210
HiF 180x285 1800 x 2850 1540 x 2600 8 8 6 4 4.1 12
HiF 210x100
HiF 210x150
HiF 210x240

1000 x 1000 720 x 750 1 1 1.2 3
1000 x 1200 720 x 950 1 1 1 1.2 3
1000 x 1500 720 x 1250 2 2 1 1.8 6

1500 x 1000 1240 x 750 2 2 1 1.8 6
1500 x 1200 1240 x 950 2 2 1 1 1.8 6
1500 x 1500 1240 x 1250 4 2 1 1 2.4 9
1800 x 1000 1540 x 750 2 2 2 1 1.8 6
1800 x 1200 1540 x 950 2 2 2 1 2.4 6
1800 x 2100 1540 x 1840 6 6 4 2 3.3 9

2100 x 1000 1840 x 1750 3 3 2 1 2.4 6
2100 x 1500 1840 x 1250 3 4 2 2 3.3 12
2100 x 2400 1840 x 2150 9 8 6 4 4.1 12

We have the oven

for your bakery!

Sveba-Dahlen develop, market and manufacture rack,

deck and tunnel ovens, proving chambers and

fermentation lines for professional baking.

We also supply supplementary bakery equipment which makes the

work more efcient in both large and small bakeries world wide.

Visit our website!

www.sveba-dahlen.se

Sveba-Dahlen AB, 518 32 Fristad

Tel: [phone], Fax: [phone], [e-mail]

1427-059/6

Scandinavian know-how – worldwide