Daewoo ST200D User Manual

W O R T H

k n o w i n g

Please keep the video machine's guarantee card and receipt safe for warranty purposes.

Precautions

Read carefully through this manual to familiarize yourself with this high-quality video recorder.

Make sure the rating of your household electricity supply matches that shown on the back of the video recorder.

Refer to this chapter and the "Initial installation" chapter to help you install and adjust your video recorder.

Do not ...

... expose the video recorder to high levels of humidity and heat, to avoid the risk of fire and electric shock.

... open the video recorder. Have a qualified technician carry out repairs.

... connect the video recorder to the power supply if you have just moved it from a cold to warm environment. This can result in condensation inside the recorder and cause serious damage to the machine and cassettes. Wait around two hours to allow it to reach room temperature.

Make sure ...

... the recorder is placed on a steady, flat surface.

... the recorder should be placed at least 10cm apart from the other home appliances or the obstacles to get sufficient ventillation.

... you clean the recorder only with a soft, lint-free cloth; do not use aggressive or alcohol-based cleaning agents.

... you disconnect the power supply if the recorder appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have a qualified technician check the recorder.

... you disconnect the power supply and aerial if you will not be using the recorder for a long period or during a thunderstorm.

This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this apparatus.

For your own safety!

There are no components in this video recorder you can service or repair yourself.

Do not open the case of the video recorder. Only allow qualified personnel to repair or service your set.

This video recorder is designed for continuous operation. Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it.

Recording any copyright protected material may infringe a copyright.

Before doing anything with the machine, please read the chapter "Initial installation".

W O R T H

k n o w i n g

Contents

Controls

The remote control unit

The machine, On screen display

Initial installation

Connecting up the video recorder,

Setting up the video recorder

OSD (On Screen Display) ON & OFF

Playing cassettes

Playing back

Still, Variable picture search, Variable

Accessing new recordings (index scan),

Recording cassettes

Simple recording

One touch recording (OTR)

More functions

Normal timer recording

Timer Review – changing and erasing,

Clock/Counter display, Remaining time

Accessing counter zero position,

Menu languages, Child lock, Cassettes,

Tuning in new stations

Tuning

Station names

Sorting programme locations, Clearing

Connections and copying

To the TV via antenna cable (if you are

Copying, Assembling

Appendix

Brief instruction for experienced users

Before you ask a specialist

Index, Technical data

On the following pages, the pictures show the buttons you press on the remote control to perform the function, and what you should see in the On Screen Display or machine display (if present).

C O N T R O L S

max. 7 m.

30° 30°

The buttons to use are marked on the following pages.

The remote control is the principle means of control, but the main playback and record functions are also available on the front of the machine.

Press any button to turn on the power.

The remote control unit

power on/off

this button is not available for this set

number buttons to select programmes (stations) or to type in numbers

this button is not available for this set

a button for selecting input sources for recording: TV stations – input sockets

You can select the external line by using “00”, “AV”, or “PR+/-“ button. (refer to page 20)

clock/counter on-screen display

CM skip button to cue the tape for 30 seconds

pause (record), still (playback)

playback start

playback stop

rewinding/fast forwarding a cassette from stop, or picture search backwards/forwards from playback mode

the record or OTR button

(One Touch Recording means: each time you press the button recording is extended by 30 minutes)

to eject the cassette

a button that doubles the maximum recording time for very long recordings

the variable slow motion button

the menu controls, programme (station) selection (PR +/–)

to search the beginnings of records (index)

this button is not available for this set

Press any button to turn on the power.

The machine

C O N T R O L S

STANDBY/ON

playback stop and ejecting the cassette

front input sockets for connecting a camcorder

programme (station) selection

recording or OTR

(One Touch Recording means: each time you press the button recording is extended by 30 minutes)

rewinding / fast forwarding a cassette from Stop, or picture search backwards / forwards from playback mode.

playback start

On screen display

MAIN MENU

TIMER PROGRAM

PR PRESET

VCR SETUP

TAPE CONTROL

PR+/-:SELECT

OK:CONFIRM MENU:END

The video’s menu system gives you easy-to-understand access to the less used functions such as tuning to stations, clock setting and more.

“Tape Control” Menu appears only when a tape is in the VCR.

	VCR
	CLOCK
	LANGUAGE
*	RF OUTPUT
	16:9 SET
	OSD
example	PR+/-:SELECT
example	OK:CONFIRM

The menus which button the next step

* Though the ”16:9 Set” is displayed on the screen,

I N S TA L L AT I O N

The buttons to use are marked on the following pages.

Place your video

horizontally on a flat, steady base so that air can circulate around it for ventilation.

away from humidity and heat, magnetic fields, such as those from loudspeakers etc., and with no heavy objects placed on top.

Connecting up the video recorder

Switch off all components when connecting or disconnecting cables.

AC 230 V,

50 Hz

Unplug the aerial cable from your TV and plug it into the "ANT. IN" socket of the video.

Plug the short coaxial cable provided into the "ANT.OUT" socket of the video and the aerial socket of the TV.

Plug a RCA cable into the "RCA” socket of the video and the AV socket on the TV if available.

This connection will provide best picture and sound quality. Ask your dealer for an appropriate cable if you do not have one.

Without a RCA cable, you need to follow the steps described under "If you are not using a RCA cable" (right page and page 19).

Make sure the rating of the household mains supply matches the rating shown on the back of the video.

Now plug in the mains lead. The display of the video should now light.

Fitting the remote control's batteries

–		Fit the batteries as
	–	Fit the batteries as
1.5 V (AAA)		shown by the
1.5 V (AAA)		pictures in the bay.
		pictures in the bay.

Protect your environment by returning used batteries to your dealer. Since batteries contain toxic substances they require special disposal methods.

Make sure the batteries are always of the same type and age, and remove them

from the remote control if you are not using it for a long period.

Switch the TV on.

You can also start "Auto Search" in the menu "PR Preset" "Auto Search".

To tune in new stations (manual tuning) and to enter station names see page 16-18.

Setting up the video recorder

LANGUAGE SET

ENGLISH

POLISH

CZECH

HUNGARIAN

PYCCKNZ

DEUTSCH

SLOVAK

PR+/-:SELECT

OK:CONFIRM MENU:END

AUTO SEARCH!

OK:CONFIRM MENU:END

AUTO SEARCH

PR03

V-L - - - - - - - - - - - - - -

76%

MENU:END

AUTO SEARCH

...

PLEASE WAIT...

I n i t i a l

INSTALLATION

I N S TA L L AT I O N

Setting up the video recorder (continued)

ONE OR MORE STATIONS ARE CLOSE TO THE VIDEO PICTURE. PLEASE SELECT ANOTHER.

CURRENT

PR 52

RECOMMENDED PR 54

0-9:SELECT (21-69) OK:CONFIRM MENU:END

IMPORTANT!

PLEASE CHANGE THE TV PR TO 54.

CLOCK SET

TIME - - : - -

DATE - - / - - /- - - -

0-9:SETUP (HOUR)

/ :CORRECT MENU:END

MANUAL SET

PR01 P-01	PR08 P-08
PR02 P-02	PR09 P-09
PR03 P-03	PR10 P-10
PR04 P-04	PR11 P-11
PR05 P-05	PR12 ----
PR06 P-06	PR13 ----
PR07 P-07	PR14 ----
PR+/-:SELECT
OK:CONFIRM	MENU:END

If other stations are positioned on near the current RF OUTPUT PR, the guide message appears automatically.

The VCR recommends the optimal RF OUTPUT PR number automatically.

Press the OK button to confirm the recommended PR.

Then type in the current time and date.

Should you wish the stations to have the same numbers as those used on the TV, follow the instructions in "Sorting programme locations" on page 20.

Else ...

exit the basic installation function and enjoy your video recorder.

If you don´t see this picture, because you don´t use a RCA cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual).

In case of interference problems on CH 52, type in an other transmission channel between 21 and 69 using the number buttons.