Daewoo RC-400B User Manual

VACUUM CLEANER
OWNER'S MANUAL
READ AND KEEP THIS
• Thank you for purchasing this vacuum cleaner.
• For proper operation, please read this manual before using.
CONTENTS
•Names of parts and operation technique
.........
•Replacing the dust bag
.....................................
•Replacing the hepa filter
..................................
•Empty the dust box
..........................................
•Important safety instructions
............................
•Before asking for service
..................................
EXTENSION PIPE
32
NAMES OF PARTS AND OPERATION TECHNIQUE
• Turn the unit off(on) by pressing the ON/OFF switch button on the unit.
• Slide the knob to control the suction power.(RC-400B Series model)
• IF RED : Dust bag(or dust box) is full. Change bag or clean dust box.
• See the next page for instruction on replacing the dust bag or cleaning the dust box.
• Insert nozzle holder in the clip which is built onto the unit.
• Press the button in the direction shown by the arrows and pull(or push) the pipe.
• Rotate the pipes in the direction shown by the arrows and pull pipes(or floor nozzle) apart.
• If you slide the suction control on the hose, you can control the force required to push the floor nozzle.
• Select the appropriate setting of the pedal according to the surface to be cleaned.
Carpet Hard Floor
Press
Press
• Press the button and pull the hose adapter out of the unit.
Hose adapter Hose
Button
Lift
Pull
Motor protection filter
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Dust cover
Press
• Press the cord rewind button to rewind the cord.
Cord
Slide
Slide
Hose
Pipe
Pull(Press)
Button
Clip
Clip
Nozzle holder
Nozzle holder
Suction control
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
Press
• Lift the dust cover upward toward you and take out the motor protection filter.
• Shake the filter to remove the dust.
• Place the motor protection filter in the correct.
• Press the dust cover firmly.
HANDLE RELEASE BUTTONFLOOR NOZZLE
CORD REWIND
ON/OFF SWITCHDUST INDICATOR
CLEANING THE FILTER
PIPE/BRUSH CONNECTION
STORAGE
Loading...
+ 2 hidden pages