Daewoo FRS-280IAL User Manual

Be sure to keep for safety !

Read these safety instructions thoroughly and carefully before using. Please keep this user guide at hand for future reference.

Indicates the possibility of danger of	Indicates the possibility of risk of personal injury
	or material damage

CAUTION

Other Signs

DO NOT remove or disassemble!	NO., DO NOT...
Be sure to unplug from receptacle(outlet/mains)!	Be sure to keep and follow!

Caution

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

WARNING

Never let the power cord be crushed	Do not plug several appliances into the same
by the refrigerator itself or other (heavy) objects.	wall outlet (receptacle).
Never bend power cord excessively.
If the cord is damaged or peeled, it can be a	It can be a cause of overheating and/or fire.
cause of fire and electric shock.	Use an exclusive grounding receptacle for the
	refrigerator.

Never hold the power cord or plug with wet	Never use a damaged power cord or plug,
hands.	or loose main socket.
There is a risk of electric shock.	There is a risk of fire, electric shock or serious
	injury.

Be sure to ground. Check if your wall outlet is	Never unplug by pulling only the power cord
grounded (earthed).	wire. Always grip the plug firmly.

There is a risk of electric shock hazards.

1

		WARNING
	Let the cord from the plug				a wet floor or
	directed Downwards.				moisture.
	If it is directed up, the cord near the		Electric insulation gets weakened, resulting in
	bent and can be damaged, which can		a risk of electric shock hazards.
	electric shock or fire.
	Never let the power cord touch or				wall outlet.
	heating appliances.				resulting in
	Power cord can be damaged, resulting
			a risk of electric shock hazards.
	risk of electric shock hazards.
	Never pour or spray water into the
	refrigerator (both interior and exterior)
			Water can be poured into the refrigerator and
	Electric insulation gets weakened,		can cause electric shock hazards or damage.
	a risk of electric shock hazards.
	Do not let children hang on the			move or remove compartment
	doors.		shelves/pockets while foods and containers
				them.
	Refrigerator can fall and do harm to		Hard container (of glass, metal etc.) can fall to
			hurt you and can break shelf glass and interior
			parts.
	Never repair or disassemble or amend		Never store any flammable gas or liquid
	refrigerator on your own		in the refrigerator.
	There is a risk of personal injury or
	the refrigerator. It is recommanded
	service be carried out by a qualified
	Never use flammable
	gasoline, spray etc		in the kitchen, ventilate it immediately without
	There is a risk of fire, explosion and personal		touching power plug or refrigerator.
	injury or damage.

		WARNING
	Do not store medicine,		Never insert fingers or hands into the bottom
	samples which require		of refrigerator, especially into the bottom back.
	control in the refrigerator		You can be hurt by sharp metal edges or can
			receive an electric shock.
	Do not change fuse or light bulb on		When you find the power cord damaged or
	own. Call the service agent to change them.		cut, call the service agent immediately.

When you get rid of your old refrigerator, be sure to remove the door packings first.

Children can be entrapped and	in an
abandoned refrigerator.
Leave it just a few days! is very	.

CAUTION

	Be sure to unplug	is not	Never touch foods and containers especially
	used for a long time		of metal with wet hands in the freezer
			compartment.
			You can be hurt by chilblains or cold bum.
	Never eat any decayed or	food at all.	Never place bottles and containers of glass in
			the freezer compartment.
	Foods stored too long in the refrigerator can be		Glass containers and bottles can be broken so
	decayed or deteriorated .
			can hurt you.
	When moving the	or	Be sure to turn up the wheel first before
	tilted), more than	to	moving the refrigerator.
	hold it.		The wheels can damage or scratch the floor.
	( One to hold top back handles, the other,
	bottom holder. )		If you move it a long distance, never forget to
			fasten the interior parts tightly with tapes.
	If other parts gripped, it is very dangerous
	and likely to slip.		The parts can collide and break each other.

3

Installation Guide

Control Panel

Optical Sensor

FILTER

NORMAL

CHANGE

If you fill the refrigerator with much foods or in case of frequent door openings, Speed Mode starts automatically to maintain optimal condition of temperature.

Optical Sensor in the top center of the panel senses the amount of light surrounding the refrigerator.

-When it decides that it is dark (night), Silence Mode starts. Refrigerator works on in minimum operation condition, so it makes little or less working noise.

-[Notice] Do not let the Optical Sensor be covered by memo sheet (Post-it) etc.

It shows that the digital control system is working the refrigerator. (The icon is always on while the refrigerator is working.)

As long as the refrigerator is working deodorization is always on.

The NORMAL (Green LED) is ON for 6 months after the first installation of the refrigerator.

-When the time comes to change the filter or RESET, press the [ICE MAKER LOCK] for 3 seconds or more while pressing the [LOCK] button, then the LED will change to NORMAL(Green).

Children may push any button on the panel for fun, resulting in disorder of temperature and function of refrigerator.

-Press this button to lock out this case and to keep temperature and function setting.

-Push Lock button again for more than a second to stop it.

WATER

WATER / ICE

ICE MAKER

LOCK

CUBED ICE CRUSHED ICE

For your convenience you can select WATER / CUBED ICE or CRUSHED ICE.

A rectangle line around the icon lights up to indicate your selection is ON.

To obtain the water or ice, push the pad smoothly with your cup and your selection will come out 1~2 seconds later.

-Try to avoid placing the rim of your glass near the bottom of the pad, otherwise Water or Icecubes may spill or splash.

-You will hear a snap sound 2 seconds after the icecubes come out. This is from the shut off ice-out valve.

-Wait 2~3 seconds after pushing the pad to get all the available water or ice cubes.

If you need total silence from the refrigerator just push sleep button.

This mode works for maximum 12 hours and then it returns to the previously set mode.

When you want to stop the mode, just push the button again and it also returns to the previously set mode.

When cleaning the icecubes case assembly or when you do not use for a long period of time, remove the icecubes in the ice storage case and press the button to stop making icecubes.

Interior lights of refrigerator turn off when the doors are open for more than 10 minutes.

In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with 1 minute interval.

LCD Background Light

The LCD light turns on in the following case to help you control the panel easily ;

When the refrigerator is pluged in

When you push a button (The background light turns on first, then button mode is activated.)

When you open the door

					If you push a button when the backlight is off, only the backlight turns on and it does not affect any other button mode.
Egg case	Egg cradle	Filter Box	Water supply Kit	User guide	The LCD light turns off in the following case to save energy consumption ;

1 minute after power plug in

10 seconds after the door is closed

No other button is pushed for more than 1 minute after button selection

When you look at LCD display from side or down, not from front, the display (letters, icons and signs) can look faded or dim.

4

5

Temperature Control

When this refrigerator is first plugged in, the temperature mode is set to [Middle].

Optical Sensor

WATER

CUBED ICE CRUSHED ICE

Freezer Compartment	Refrigerator Compartment
Push the FREEZER SET. button and the setting	Push the REFRIGERATOR SET. button and the
temperature changes as the figure shows.	setting temperature changes as the figure shows.
>>> Sequential Temperature Change <<<	>>> Sequential Temperature Change <<<

	Faster Freezing...	Faster Cooling or
		Refrigeration
	When you want faster freezing, push the SUPER	When you want faster refrigerating, push the
	FREEZER. button, then QUICK icon turns on and	SUPER REFRIGERATOR. button, then QUICK
	the mode starts. Just push the button once again	icon turns on and the mode starts. Just push the
	when you want to stop the mode.	button once again when you want to stop the mode.

LOCK		CUBED ICE CRUSHED ICE
ON / OFF	WATER	CUBED ICE

The inside temperature varies according to door

openings, amount of foods, surrounding temperature

etc.

The mode ends automatically and it returns to the previously set mode.

For example) The refrigerator is working on [LOW Mode]. --> [SUPER FREEZER.] starts and ends. --> Returns to [LOW Mode] again.

Notice

The inside temperature varies according to door openings, amount of foods, surrounding temperature etc.

The mode ends automatically and it returns to the previously set mode.

For example) The refrigerator is working on [LOW Mode]. --> [SUPER REFRIGERATOR.] starts and ends. --> Returns to [LOW Mode] again.

Foods in the refrigerator can be frozen if the ambient temperature of the refrigerator is below 5.

How To change the lnterior Light Bulb

The lamp shall be replaced only by a service agent or similarly qualified person.

Change of Freezer Lights

Hold the bottom of the light	Change the light bulb.
cover and pull forward to	Follow the reverse order
remove.	of disassembing after
	changing the light

Change of Refrigerator Lights

Refrigerator Top Lights

the screw caps	Remove the screws	Hold the botton of the light	Change the light bulbs.
at the bottom of the	retaining the light cover.	cover and pull forward to	Follow the reverse order
with a small tip		remove.	of disassembing when
driver.			assembling back.

Refrigerator Bottom Lights

out the bottom hook	Hold down the light cover to	Change the light bulb.
light cover with a flat	pull out.	Follow the reverse order after
driver.		changing the light.

6

7