Daewoo FRS-2021IAL User Manual

Be sure to keep for safety !
Read this safety instructions thoroughly and carefully before using. Please keep this user guide
at hand for future reference.
1
WARNING CAUTION
Indicates the possibility of danger of death or serious injury
DO NOT remove or disassemble!
Be sure to unplug from receptacle(outlet/mains)!
NO., DO NOT...
Be sure to keep and follow!
Other Signs
W ARNING
Do not plug several appliances into same wall outlet (receptacle).
It can be a cause of overheating and/or fire. Use an exclusive grounding receptacle for the
refrigerator.
Never let power cord be crushed by refrigerator itself or other (heavy) objects. Never bend power cord excessively.
If cord is damaged or peeled, it can be a cause of fire and electric shock.
Never use damaged power cord or plug, loose receptacle.
There is a risk of fire, electric shock or serious injury.
Never unplug by pulling only the power cord wire. Always grip the plug firmly.
Never hold the power cord or plug with wet hands.
There is a risk of electric shock.
Be sure to ground. Check if your wall outlet is grounding (earthed) one.
There is a risk of electric shock hazards.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a simmilary qualified person in order to avoid a hazard.
2
Do not install refrigerator on a wet floor or in a place with much humidity moisture.
Electric insulation gets weakened, resulting in a risk of electric shock hazards.
Let the cord from the plug outlet be directed Downwards.
If it directed up, the cord near the plug is bent and can be damaged, which can cause electric shock or fire.
Check if plug is loose from the wall outlet.
Electric insulation gets weakened, resulting in a risk of electric shock hazards.
Never let the power cord touch or pass over heating appliances.
Power cord can be damaged, resulting in a risk of electric shock hazards.
Do not place containers with water or liquid on top of refrigerator.
Water can be poured into the refrigerator and can cause electric shock hazards or damage.
Never pour or spray water into the refrigerator (both interior and exterior).
Electric insulation gets weakened, resulting in a risk of electric shock hazards.
Do not move or remove compartment shelves/pockets while foods and containers are on them.
Hard container (of glass, metal etc.) can fall to hurt you and can break shelf glass and interior parts.
Do not let children hang on the refrigerator doors.
Refrigerator can fall and do harm to them.
Never repair or disassemble or amend refrigerator on your own
There is a risk of personal injury or damage to the refrigerator. It is recommanded that any service be carried out by a qualified person.
Never store any flammable gas or liquid in the refrigerator.
Never use flammable gas, benzene, thinner, gasoline, spray etc. near the refrigerator.
There is a risk of fire, explosion and personal injury or damage.
If a gas leak found near the refrigerator or in the kitchen, ventilate it immediately without touching power plug or refrigerator.
W ARNING
3
Do not store medicine, academic research samples which require strict temperature control in the refrigerator.
Never insert fingers or hands into the bottom of refrigerator, especially into the bottom back.
You can be hurt by sharp metal edges or can receive an electric shock.
Do not change fuse or light bulb on your own. Call the service agent to change them.
When you find the power cord damaged or cut, call the service agent immediately.
When you get rid of your old refrigerator, be sure to remove the door packings first.
Children can be entrapped and suffocated in an abandoned refrigerator. Leave it “just a few days!”is very dangerous.
Be sure to unplug when the refrigerator is not used for a long time.
Never touch foods and containers especially of metal with wet hands in the freezer compartment.
You can be hurt by chilblains or cold bum.
Never eat any decayed or deteriorated food at all.
Foods stored too long in the refrigerator can be decayed or deteriorated .
Be sure to turn up the wheel first before moving the refrigerator.
The wheels can damage or scratch the floor. If you move it a long distance, never forget to fasten the interior parts tightly with tapes.
The parts can shake to break each other.
When moving the refrigerator (layed or tilted), more than 2 persons are required to hold it. ( One to hold top back handles, the other, bottom holder. ) If other parts gripped, it is very dangerous and likely to slip.
Never place bottles and containers of glass in the freezer compartment.
Glass containers and bottles can be broken so can hurt you.
W ARNING
CAUTION
4
󱎲
Never install the refrigerator on a wet, watery floor or where water can easily gather.
󱎳
Check the following before power connection.
Connect power plug only to a grounding wall receptacle (an earthed mains).
Do not plug refrigerator power together with other appliances to a same receptacle(socket).
󱎴
Do not use an adapter plug or an extension cord.
󱎵
Do not let power cord be crushed down by other (heavy) objects .
If you hear strange noise or strong chemical odor or find smog etc. from the refrigerator after
power plugin, pull out the plug immediately and call the service.
Wait about 5 minutes before you plugin again in order to prevent any
damage to the compressor and electrical devices of refrigerator.
Wait 2~3 hours until the inside gets cold enough after first power plugin, then store foods in.
(There can be some peculiar smell of plastic parts at initial operation of refrigerator after plugin. The smell fades away as refrigerator works and doors are opened and closed.)
Precautions in installation and power connection
T o prevent fire, electric shock or leakage
Precautions in use
To prevent personal injury , fire, electric shock etc. read this user guide carefully before use and
keep it at hand for any reference.
Read these safety instructions carefully before use and follow precautions for your safety .
Egg case Egg cradle User guide
󱇲Accessories
Installation Guide
The LCD light turns on in the following case to help you control the panel easily ;
When the refrigerator is pluged in
When you push a button (The background light turns on first, then button mode is activated.)
When you open the door
If you push a button when the backlight is off, only the backlight turns on and it does not affect any other button mode.
The LCD light turns off in the following case to save energy consumption ;
1 minute after power plug in
10 seconds after the door is closed
No other button is pushed for more than 1 minute after button selection
When you look at LCD display from side or down, not from front, the display (letters, icons and signs) can look faded or dim.
Control Panel
5
Optical Sensor in the top center of the panel senses the amount of light surrounding the refrigerator. When it decides that it is dark (night), Silence Mode starts. Refrigerator works on in minimum operation condition, so it makes little or less working noise.
[Notice] Do not let the Optical Sensor be covered by memo sheet (Post-it) ect.
It shows that the digital control system is working the refrigerator. (The icon is always on while the refrigerator is working.)
As long as the refrigerator is working deodorization is always on.
Interior lights of refrigerator turn off when the doors are open for more than 10 minutes.
In case either freezer or refrigerator door is open for more than a minute, door alarm rings for 5 minutes with
1 minute interval.
Children may push any button on the panel for fun, resulting in disorder of temperature and function of refrigerator. Press this button to lock out this case and to keep temperature and function setting.
Push Lock button again for more than a second to stop it.
If you fill the refrigerator with much foods or in case of frequent door openings, Speed Mode starts automatically to maintain optimal condition of temperature.
If you need total silence from the refrigerator just push sleep button. This mode works for maximum 12 hours and then it returns to the previously set mode. When you want to stop the mode, just push the button again and it also returns to the previously set mode
LCD Background Light
Optical Sensor
6
Temperature Control
When this refrigerator is first plugged in, the temperature mode is set to [Middle].
Push the FRZ SET. button and the setting temperature changes as the figure shows.
Push the REF SET. button and the setting temperature changes as the figure shows.
>>> Sequential Temperature Change <<< >>> Sequential Temperature Change <<<
Foods in the refrigerator can be frozen if the ambient temperature of refrigerator is below 5℃.
When you want faster freezing, push the SUPER FRZ. button, then
QUICK”icon turns on and the mode starts. Just push the button once again when you want to stop the mode.
Faster Freezing...
When you want faster refrigerating, push the SUPER REF. button, then “QUICK”icon turns on
and the mode starts. Just push the button once again when you want to stop the mode.
Faster Cooling or Refrigeration
The inside temperature can varies according to door
openings, amount of foods, surrounding temperature etc.
The mode ends automatically and it returns to the
previously set mode.
For example) The refrigerator is working on [LOW Mode]. -->
[SUPER FRZ.] starts and ends. --> Returns to [LOW Mode] again.
The inside temperature can varies according to door openings, amount of foods, surrounding temperature etc.
The mode ends automatically and it returns to the previously set mode.
For example) The refrigerator is working on [LOW Mode].
--> [SUPER REF.] starts and ends. --> Returns to [LOW Mode] again.
Freezer Compartment Refrigerator Compartment
Optical Sensor
7
How to use interior parts
The first case or drawer of the refrigerator compartment can be used either as a vegetable case or as a chilled case for your convenience.
The temperature in the chilled case is somewhat lower than the vegetable one, so you can keep food more fresh.
If you store vegetables and fruits in the chilled room mode, they can be frozen.
If you store fish in the chilled room mode for a long time, it can deteriorate. Store it in the freezer compartment.
Do not place foods close to the cold air spout, for it can weaken cold air circulation.
Pull out ice cubes maker and fill with pure water.
When ice cubes are ready , turn the handle clockwise to separate.
If ice cubes are not to fall easily, turn it to the end several times.
Do not turn the separation handle if the ice cubes are not ready, for they gets sticky on the ice tray and case.
Do not use ice cubes case to make big ice block, for it can be broken.
Pull out the case, clean and dry it if not used (for a long time).
Do not pour water too much, for the ice cubes made get sticky and do not to separate easily.
Keep in mind not to go beyond the water line with an arrow mark when filling with water.
󱇲For Vegetable Case 󱇲Be sure to check the handle bar direction󱇲For Chilled Case
󱇲Vegetable Case & Chilled Case
󱇲Ice Cubes Maker
Loading...
+ 15 hidden pages