Daewoo DWD-WD1363RC User Manual [nl]
IMPORTANT SAFETY GUIDE .............................................................. 2
PARTS AND FEATURES ....................................................................... 3
INSTALLATION INSTRUCTIONS .......................................................... 4
INSTALLATION OF ACCESSORIES .................................................... 8
TO USE AUTOMATIC DETERGENT DISPENSER ............................. 9
OPERATING YOUR WASHER ............................................................ 10
THE FUNCTION OF CONTROL PANEL ............................................ 12
WASHING PROGRAM ........................................................................14
WASHING PROCEDURE AND SELECTION .................................... 16
GUIDE FOR OTHER USEFUL PROGRAMS ..................................... 17
MAINTENANCE ...................................................................................21
HOW TO CLEAN THE FILTER ............................................................ 22
REMOVING STAINS ............................................................................ 23
TROUBLE SHOOTING ........................................................................24
SPECIFICATION .................................................................................. 25
CONTACT INFORMATION
Website : http://www.e-daewoo.com
Call : 1-877-393-7823(1-877-DWESVC3)
■ Economic wash system
With artificial intelligence, the washer uses minimum energy and water by
selecting optimal water level and washing time.
■ Low noise system
The washer minimizes the washing and spinning noises by sensing the
amount of laundry.
■ Child-Lock
The Child-Lock system is adopted to prevent children from pressing any
button to change the program during operation.
■ Automatic Liquid Detergent Inlet
The washer offers convenience by automatic supply system of detergent
CONTENTS Page
A NOTE TO YOU
Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer property and safely.
Please read it carefully.
Featur es
Washing Machine OWNER'S Manual
DWD-WD1353WC/SC/RC, DWD-WD1363WC/SC/RC
As an E
NERGYSTAR
® partner,
DAEWOO has determined that
this product meets the E
NERGY
2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
OPERATION INSTRUCTIONS
"WARNING - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance." This statement is omitted when the operating instructions are preceded by the safety instructions and are
included in the same manual.
Understanding your responsibilities when using the washer.
1. Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same wash. Hazardous fumes can form.
2. Unplug power supply cord before attempting to service your washer.
3. Do not wash fiberglass material. small particles can stick to fabrics washed in following loads and cause skin irritation.
4. Do not spray water on the control panel of the washer. It could cause fire or an electric shock.
5. In case of the dual valve model, if you connect only cold water inlet valve, while water temperature is selected as hot or warm, there
can be water leakage form unconnected water inlet valve.
IMPORTANT SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
SAVE THESE INSTRUCTIONS
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury, or loss of life
WARNING! - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions,
including the following :
1. Read all instructions before using the appliance.
2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning
solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.
3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near
children.
4. Before the appliance is removed from service or discarded, remove the door.
5. Do not reach into the appliance if the drum is moving.
6. Do not install or store this appliance where it will be exposed to the weather.
7. Do not tamper with controls
8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the usermaintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances
give off vapors that could ignite or explode.
10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing
machine, turn on all hot water faucets and let the water flow from each for several minutes.
This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
WARNING! - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified
electrician
3
PARTS AND FEATURES
NOTE
The drawings in the book may vary from your washer model.
They are designed to show the different features of all models covered by this book,
so your model may not include all the features.
Accessories
The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer.
INLET HOSE
(HOT, OPTION)
INLET HOSE
(COLD)
POWER PLUG
DRAIN HOSE
ADJUSTABLE LEG
PUMP COVER
DOOR
CONTROL PANEL
Owner’s Manual Cap holder (4EA) Pedestal (OPTION)
Drain hose Inlet hose Spanner Wrench UNIT LEVELER AS
∗ Design of
pedestals is
subject to
change without
manufacturers
notice.
4
INSTALLATION INSTRUCTIONS
Removing transit bolts
1. Before operating the washer,
remove the transit bolts(4ea)
along with the rubber.
• If the bolts are not removed, it
may cause heavy vibration,
noise and malfunction.
2. Unscrew the 4 bolts with the
spanner wrench supplied. Keep
the 4 bolts and spanner wrench
for future use.
• Whenever the appliance is
transported, the transit bolts
must be installed.
3. Close holes with supplied cap
holders.
Location of your washer
• Check location where the washer will be installed. Make sure you have everything necessary for correct installation.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Do not place or store laundry products on top of washer at any time.
• Install the washer on a solid floor. If the washer is installed on an unsuitable floor,
it could make considerable noise, vibrate severely and cause a malfunction.
If the washer is not level, adjust leg up or down according to instructions below.
• Ventilation openings must not be obstructed by carpeting when the
washer is installed on a carpeted floor.
• Leave some space (right & left : 1 inch, rear : 4 inch).
• In case of built-in installation, the distance between top of the washer
and bottom of upper plate should be at least 0.11 inch(3mm).
Drain Hose
Washer
Laundry
Tu b
Approx.
1 inch
Level adjustment
① If the washer is installed on an unsuitable floor, it could make
considerable noise, vibrate and cause a malfunction.
② Adjust the level of washer using adjustable legs.
• Please check if there is any gap between the four adjustable legs and the floor.
• Install unit leveler and turn adjustable leg with the enclosed spanner wrench to adjust the level of washer and or
swaying of washer.
• After the adjustment is finished, turn the locking nuts up
tightly so that the washer maintains the adjustment.
③ Make it sure that the washer does not sway when
you press down the four corners of the washer’s top plate.
NOTE
There should be no swaying of washer and all the
adjustable legs should be firmly seated to the floor.
Fixing Nut
adjustable leg
5
Connecting water supply hose
• Water supply pressure must be between 4.5 and 145 PSI
(30~1000 kPa).
• Do not crossthread when connecting inlet hose to the valve. If
the water supply pressure is more than 145 PSI, a pressure
reducing device should be installed.
• Two Sealing washers are supplied with the water inlet hoses to
prevent water leaks.
• Check for leakage of washing machine connections by turning
the tap completely on.
• Periodically check the condition of the hose and replace the
hose if necessary.
• Make sure that there is no kink in the hose and that it is not
crushed.
• Be sure that the two water input ports are connected to the
correct water faucets. The connector for hot water is colored red.
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.
Do not install your washing machine in a room where temperatures below freezing may occur.
Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below the freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing, store the washing machine
at room temperature for a few hours before putting it into operation.
(Connect to the faucet)
(Connect to the water
valve of the washer)
Drain system
• Never forget to install drain hose before operating your
washer.
• Open the packing box, and there is a drain hose inside
the drum.
• Connect the drain hose to the drain outlet at the back
side of the washer.
• Top of laundry tub must be at least 24 inches high and
no higher than 40 inches from bottom of washer.
• When installing the drain hose to tub(sink), secure it tightly with a string.
• Proper securing of the drain hose will protect the floor from damage due to water leakage.
• When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise.
Electrical connection
• Do not use an extension cord or double adaptor.
• If the cold water supply is damaged, it must be replaced by a qualified person in order to avoid a hazard.
• If the machine will not be used for an extended time, unplug it and shut off the water supply.
• Connect the machine to a grounded outlet in occordance with current wiring regulations.
• The appliance must be positioned so that the plug is easily accesible.
min. 24inch
max. 40inch
min. 24inch
max. 40inch
min. 24inch
max. 40inch
6
Installation Clearances
• Washer dimensions
• The location must be large enough to fully open the
washer door.
• Most installations require a minimum clearance.
Sides - 1 in(2.5cm)
Rear - 4 in(10.2cm)
Top - 32 in(81.3cm)
• Additional spacing should be considered for
installation and servicing.
• Companion appliance spacing should also be
considered.
Minimum clearances for closet
installation
• Closet installations require a minimum clearance.
Sides - 1 in(2.5cm)
Rear - 1 in(10.2cm)
Top - 32 in(81.3cm)
27"
(68.6 cm)
31.8
(80.9cm)
40.1
(102cm)
40.9"
(104cm)
32"
(81.3cm)
1"
(2.5 cm)
1"
(2.5 cm)
27"
(68.6 cm)
48 in.
2*
(310 cm2)
24 in.
2*
(155 cm2)
3"
(7.6cm)
3"
(7.6cm)
[Front view]
[Closet Ventilation]
7
Level floor
• Allowable pitch of the floor must not exceed 1".
•Tominimizenoiseandvibration,thewasher
MUST be installed on a solidly constructed
floor.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or weakly
supported structure
NOTE:Afirm,solidfloorisevenmorecriticaltoa
front-loading washer than to a top-loader.
If your floor is wood and/or frame
construction,youmayneedtoreinforceit.
Front-loaders use substantially faster spin
speedsthantop-loaders,causinggreater
vibration.Ifthefloorisnotsolid,your
washer will vibrate. You will hear and feel the
vibration throughout your house.
Power outlet
• Must be within 60 in. (1.5 m) of either side of the
washer. Do not overload the outlet with more than
one appliance.
• Time-delay fuse or circuit breaker is
recommended.
NOTE: It is the personal responsibility and
obligation of the customer to have a proper
outlet installed by a qualified electrician.
31.8"
(80.9cm)
1"
(2.5 cm)
1"
(2.5 cm)
[Side view]
8
*Please be sure to read and follow the installation operation manual. (Pedestal Model : P-W151W)
Consumers safety is the first priority.
There are many safety particulars in the guidebook and
product. Therefore, please be sure to read and abide by all
safety particulars.
1. Please take out the height-high shelf and its installation
manual from the wrapped box.
2. Please untie 4 horizontal adjustment legs of the washer
and dryer.
3. Please turn and insert 4 horizontal adjustment legs in the
lower part of adjustable cases.
4. Please place the washer on the pedestal.
The washer is heavy it will require more than one person
to lift it. If your washer was previously installed, please turn
off the hot and cold water supply valves. Disconnect the
hot and cold water hoses from the water supply inlets.
Please make sure the water is completely drained from all
hoses.
5. Open the draw you will find a accessory bag containing 4
bolts, 4 lock washers and 4 flat washers.
Place the lock washer and flat washer into the bolt in that
order. To secure the washer on the pedestal, with the draw
opened, insert the 2 front bolts into each hole of the
pedestal. The holes are located on the top on the pedestal.
Please make sure you tighten the
bolts with a socket wrench.
If not the washer will vibrate.
6. In order for the washer to operate properly the
combination of the washer and pedestal must be leveled.
Please refer to page 4 Level Adjustment the same
principle applies.
7. After installing the rear bolts, attach the back cover to rear
of the pedestal with the screws provided.
8. After transferring the washer into the desired location, try
to operate the washer and check whether there are any
mechanial noises and vibration.
If you hear any noises, please check to make sure you
have removed the 4 shipping bolts. If the unit is vibrating or
rocking the unit is not properly leveled or not installed on
proper flooring.
INSTALLATION OF ACCESSORIES
CAUTION : The installation should ONLYbe preformed by an experienced electrician and/or plumber.
Excessive load is dangerous.
In case of installing and carrying the adjustable cases of
the washer and dryer, more than two persons should
do it together. Please let children not play on the cases.
Installation methods
9
TO USE AUTOMATIC DETERGENT DISPENSER
About detergent About bleach
Your DAEWOO washer is designed to use only High Efficiency (HE)detergents.
HE detergents are formulated specifically for Automatic liquid detergent dispenser washers and contain suds
reducing components.
HE detergents make less suds, improve washing and rinsing performance, and help to keep the interior of your
DAEWOO washer clean. If a regular detergent is used, it may cause oversudsing and unsatisfactory performance.
For the best washing and rinsing performance, low-sudsing HE detergents are strongly recommended.
And this is also designed to use only bleach for HE-Washer and 'safe for all loads'.
If a regular bleach is used, it may cause discoloration.
Designed specially to use only
HE(High Efficiency) detergent
'For HE-Washer'
& 'Safe for all loads'
Concentration Level
This dispenser can use any liquid HE (High Efficiency) detergent, regardless of its concentration level.
Many liquid HE (High Efficiency) detergents can be found in a concentrated form, meaning that it has more active
ingredients in each drop, taking up less space as it uses less fluid per wash.
•
The concentration level can usually be found on the label or cap of the liquid HE (High Efficiency) detergent bottle.
• You can select the concentration of your detergent every time. Detergent concentration consists of 3 level
types(C1 : Regular, C2 : Concentrated X2, C3 : Concentrated X3). Softener/Bleach concentration consists of 2
level types(S1/B1 : Regular, S2/B2 : Concentrated X2). All default concentration are set for X2.
• If the concentration is not explicitly identified on the bottle, select “X2” as the concentration level when setting the
automatic detergent dispenser options.
Concentration Level Setting
Detergent levels can be changed according to the following instructions.
The default setting for detergent is set for C2. Which is Concentrated X2. If any other type is used, you MUST
change the default setting to match the detergent.
Step 1. Press Delay Wash button and Power button for three seconds to select liquid HE(High Efficiency)
detergent.
Step 2. Set the detergent concentration by pressing the following buttons.
Step 3. Press the Power button to confirm detergent concentration.
After confirming, it will power off by itself.
+
(X2) (X3) (X1) (X2)
Main-Liquid
(X2) (X1) (X2)
Softener
(X2) (X1) (X2)
Bleach
Loading...