Daewoo DWD-FT1081, DWD-FT1082, DWD-FT1083, DWD-FT1281, DWD-FT1282 Service Manual

...

Service Manual

Washing Machine

Model: DWD-FT1081/FT1082/FT1083

DWD-FT1281/FT1282/FT1283

DAEWOO ELECTRONICS CORP.

S/M No. :

http : //svc.dwe.co.kr May. 2011

✔ Caution

: In this Manual, some parts can be changed for improving,

their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr).

AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER

WASHING MACHINE

Contents

1. SPECIFICATIONS....................................................................................................................2

2. INSTALLATION .......................................................................................................................3

Transit bolts.......................................................................................................................3

Removing transit bolts ......................................................................................................3

Installation place requirement...........................................................................................4

BS Plug Safety Details (For U.K. User)............................................................................4

Connecting inlet hose .......................................................................................................5

Installation of drain hose...................................................................................................6

Level adjustment...............................................................................................................7

3. MAINTENANCE....................................................................................................................... 8

Cleaning your washer .......................................................................................................8

Cold condition ...................................................................................................................8

Cleaning the water inlet filter ............................................................................................9

Cleaning the drain pump filter...........................................................................................9

Cleaning the detergent case...........................................................................................10

Cleaning the washing drum ............................................................................................10

4. DIRECTION FOR DISASSEMBLY........................................................................................11

5. EXPLODE VIEW AND PARTS LIST.....................................................................................14

6. FUNCTIONS OF THE CONTROL PANEL............................................................................23

7. FUNCTIONS OF THE CONTROLLER..................................................................................24

8. FUNCTION OF THE CONVENIENT SERVICE.....................................................................27

9. TROUBLESHOOTING GUIDE..............................................................................................28

10. WIRING DIAGRAM..............................................................................................................32

1. SPECIFICATIONS

SPECIFICATIONS

■

Accessories

DETERGENT CASE

INLET HOSE

HOT

(OPTION)

COLD

DOOR

LOWER COVER

ADJUSTABLE LEG

HOSE DRAIN

CONTROL PANEL

POWER CORD

Dimension (mm)

Maximum mass of texile (kg)

Unit Weight (kg)

Standard Water Consumption

Spin Speed (RPM)

Operating Water Pressure

595 x 590 x 850 (W x D x H)

7.0 / 8.0

49(Net) / 52(Gross)

50~60ℓ

400 / 800 / 1000 or 1200

0.03MPa ~ 0.8MPa (0.3kgf/cm

~ 8kgf/cm2)

MODEL DWD-FT1081/FT1082/FT1083

DWD-FT1281/FT1282/FT1283

Inlet hose Manual Cap holder(3EA)

2. INSTALLATION

INSTALLATION

■ Transit bolts

The appliance is fitted with transit bolts to prevent internal damage during transport.

■ Removing transit bolts

1. To prevent internal damage during transport, the special 3 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs.

• If they are not removed, it may cause heavy

vibration, noise and malfunction.

2. Unscrew the 3 bolts with the spanner supplied, and take out the 3 bolts with the rubber bungs. Keep the 3 bolts and the spanner for future use.

• Whenever the appliance is transported, the

transit bolts must be refitted.

3. Close the holes with the caps supplied.

INSTALLATION

■ Installation place requirement

■ BS Plug Safety Details (For U.K. User)

Level floor :

Allowable slope under entire washer is 1°.

Power outlet :

Must be with 1.5 meters of entire side of location of washer. Do not overload the outlet with more than one appliance.

Additional Clearance :

For wall, door and floor modeling is required. (10cm : rear / 2cm : right & left side)

Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured Green or Green and Yellow. The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red. If a 13 amp (BS 1363) plug is used, fit a 13amp BS 1362 fuse.

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

GREEN AND YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

This appliance must be earthed

INSTALLATION

FOR ORDINARY TAP

6 Connect the inlet hose

adapter of the hose to the water inlet of the washer by turning it clockwise to be fixed tightly.

• Please check the rubber packing present inside the inlet hose adapter of the hose.

1 Pull down the collar

of the inlet hose to separate it from the water tap adapter.

2 Loosen the four

screws properly in order to fit into

water tap.

4 Remove the tape,

and screw connector B into connector A tightly.

5 Connect the inlet hose to the water tap adapter by pulling down the collar of the hose end.

3 Fit the water tap adapter into

the water tap and tighten the four screws evenly while pushing up the adapter so that

the rubber packing can stick to the water tap tightly.

■ Connecting inlet hose

In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the cold water inlet valve.

Option : Be careful not to confuse hot water inlet and cold water inlet.

FOR SCREW-SHAPED TAP

Connect the inlet hose adapter

to the water inlet of the washer

and turn it to be fixed.

• Check the packing in the inlet.

1 Connect the inlet hose

to the water tap adapter by pulling down the collar of the hose end.

Connect the connector- inlet supplied if necessary.

Inlet Hose

Connector D

Rubber˜

Packing

Connector C

Connector˜

Inlet˜

Rubber˜ Packing

Connector D

Connector C

Hose

TAPE

Connector B

Connector A

INSTALLATION

■ Installation of drain hose

• When installing the drain hose in sink, secure it tightly with a string.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• The drain hose should not be placed higher than 100cm above the floor.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force back in to the washer. This will cause abnormal noise.

■ Installation of drain hose

INSTALLATION

■ Level adjustment

1. The level adjustment of the washing machine prevents excessive noise and vibration. Install the washing machine on a solid and even floor surface, if possible, in a corner of the room.

Note: The wooden floor may cause excessive

vibration.

2. If the floor is uneven, adjust the adjustable leg as

the following. (Do not insert pieces of wood etc. under legs.)

• Please check whether there is any gap between four adjustable legs and the floor.

• Turn adjustable legs by the enclosed spanner in order to adjust the level of the washing machine.

• Make it sure that there is no swaying of the washing machine and check that the washing machine is even completely. (use a spirit level)

• After the level adjustment is finished, turn fixing nuts up tightly so that the washing machine maintains the adjustment.

leg

Fixing Nut

❈ Diagonal Check

When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all. (Please, check both of two directions) If machine rocks when pushing the machine top plate diagonally, adjust legs again.

3. MAINTENANCE

MAINTENANCE

❈ Before cleaning the washer interior, unplug the electrical power cord avoid electrical shock hazards.

■ Cleaning your washer

1. Exterior

Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.

• Do not use methylated spirits, diluents or similar products.

2. Interior

Dry around the washer door opening, flexible gasket and door glass. Run washer through a complete cycle using hot water. Repeat process if necessary.

• Remove hard water deposits using only cleaners labeled as washer safe.

■ Cold condition

If the washer is stored in an area where freezing may occur or moved in freezing temperature, follow these instructions to prevent damage to the washer.

1. Turn off water supply tap.

2. Disconnect hoses from water supply and drain water from hoses.

3. Plug electrical cord into a properly grounded electrical outlet.

4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into empty wash drum. Close the door.

5. Set spin cycle and let washer spin for 1minute to drain out all water.

6. Unplug eletrical power cord, dry the drum interior, and close the door.

7. Remove detergent case and dry excessive water from the compartments.

8. Store washer in an upright position.

9. To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent. Do not add wash load.

MAINTENANCE

■ Cleaning the water inlet filter

• "IE" error message will blink on the control panel when water does not enter the detergent drawer.

• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.

• It is therefore a good idea to clean it from time to time.

■ Cleaning the drain pump filter

• The drain filter collects threads and small objects left in the laundry.

• Check regularly that the filter is clean to ensure smooth running of your machine.

CAUTION Be careful when draining if the water is hot.

1. Turn off the water tap.

2. Unscrew the water inlet hose.

3. Clean the filter using a had bristle brush.

4. Tighten up the inlet hose.

1. Open the lower cover(1) by

using a coin. Turn the cap hose(2) to pull out the hose. Pull out the hose maximally. (About 13~14cm.)

Unplug the cap hose(2), allowing the water to flow out. At this time use a vessel to prevent water flowing on to the floor. When water does not flow any more, turn the pump filter(3) open to the left.

3. Remove any foreign material

from the pump filter(3). After cleaning, turn the pump filter clockwise and insert the cap hose(2) to the original place. Close the lower cover.

100

about 13~14cm

about

13~14cm

■ Cleaning the water inlet filter

• "IE" error message will blink on the control panel when water does not enter the detergent drawer.

• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.

• It is therefore a good idea to clean it from time to time.

MAINTENANCE

■ Cleaning the washing drum

• If you live in a hard water area, limescale may continuously build up in places where it cannot be seen and thus

not easily removed.

• Over time the build up of scale clogs appliances, and if it is not kept in check these may have to be replaced.

• Although the washing drum is made of stainless steel, specks of rust can be caused by small metal articles (paper

clips, safety pins) which have been left in the drum.

• The washing drum should be cleaned from time to time.

• If you use descaling agents, dyes or bleaches, make sure they are suitable for washing machine use.

❈Descaler may contain chemicals that may damage part of your washing machine. ❈Remove any spots with a stainless steel cleaning agent. ❈Never use steel wool.

■ Cleaning the detergent case

• In case of residual detergents or fabric softeners have accumulated ;

- It should be cleaned with a jet of running water.

- If necessary, it can be removed completely from the washing machine.

• Detergents can be also accumulate the inside cavity. In this case, the inside cavity should be cleaned with a brush.

• After cleaning, replace the detergent case and run Rinse cycle without laundry.

Push point

1 Pull-out

2 Push and pull again

+ 24 hidden pages

Daewoo DWD-FT1081, DWD-FT1082, DWD-FT1083, DWD-FT1281, DWD-FT1282 Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual