Daewoo DWD-AD123'S, DWC-AD123'S, DWC-SD1232 Instruction Manual

Features

DWD-AD123'S

Washing Machine Instruction Manual

Economic wash system

Using artificial intelligence, the washer uses minimum

energy and water by selecting optimal water lever
and washing time.

Low noise system

The washer minimizes the washing and spinning

noises by sensing the amount of laundry.

Child-Lock

The Child-Lock system has been used to prevent

children from pressing any button to change the
program during operation.

Nano-silver sterilization washing(Option)

By applying very fine silver particles on essential

parts inside, the washer sterilizes up to 99.9% as is
done by boiling wash.

Air bubble washing(Option)

This is an advanced technology that generates

millions of air bubbles inside the drum on washing
sequence, and the bubbles dissolve the detergent
particles completely and cleanse all the soil in clothes
gently and neatly.

AUTO DETERGENT SYSTEM

No more prepare detergent before every washing

(only liquid detergent and fabric softener)

Smart Wash Auto Detergent System

You can wash easily like stocking,lingerie use smart

wash system.

Waist Care

Designed by the waist, and the

most comfortable angle eject
into the laundry is convenient
and easy to manipulate.

Self-Cleaning Course of

Drum.

Enable to Self-Cleaning of

Drum.

Digital Condensing Dry

System.

Condensing Dry System with

saveing energy.

PARTS AND FEATURES..................................................................................................................2

WASHER SAFETY ...........................................................................................................................3

INSTALLATION INSTRUCTIONS ....................................................................................................5

INLET HOSE CONNECTION ...........................................................................................................6

ELECTRICAL REQUIREMENTS .....................................................................................................7

OPERATING YOUR WASHER .........................................................................................................8

DIRECTIONS FOR USING INLET BOX .........................................................................................10

BUTTON FUNCTIONS ...................................................................................................................12

WASHING PROGRAM ...................................................................................................................13

WASHING PROCEDURE AND SELECTION .................................................................................14

MAINTENANCE .............................................................................................................................29

HOW TO CLEAN THE FILTER .......................................................................................................30

HOW TO CLEAN THE INLET BOX ................................................................................................31

REMOVING STAINS ......................................................................................................................33

TROUBLE SHOOTING ..................................................................................................................34

SPECIFICATION ............................................................................................................................35

A NOTE TO YOU

Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer property and safely.
Please read it carefully.

CONTENTS Page

Zahran Group/ Tel:[phone]

DWD-AD123'S(영)_요르단 ZHRN.indd 1 2017. 7. 11. 오후 2:00

2

PARTS AND FEATURES

The parts and features of your washer are illustrated on the page.
Become familiar with all parts and features before using your washer.

Accessories

NOTE
The drawings in the book may vary from your washer model.
They are designed to show the different features of all models coverd by this book,
Your model may not include all features.

ADJUSTABLE LEG

CONTROL PANEL

DOOR

DETERGENT CASE

INLET HOSE

(HOT, OPTION)

INLET HOSE
(COLD)

POWER CORD

HOSE DRAIN

Hose drain Inlet hose Spanner Manual Cap holder

DWD-AD123'S(영)_요르단 ZHRN.indd 2 2017. 7. 11. 오후 2:00

3

Read all instructions before using your washer

• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be used
or stored in or near your washer.

Do not add flammable fluids to your wash

water.These substances give off vapors that
can create a fire hazard or explosion.

• After starting a cycle, do not reach into the
washer until all motions stop.

• Do not tamper with the controls.

• Children of less than 3 years should be kept
away unless continuously supervised.

• The appliance is not intended for use by
young children or infirm persons without
supervision.

• If the supply cord is damaged, it must be
replaced by the manufacturer, or its service
agent or a similarly qualified person in order
to avoid a hazard.

• If the appliance is supplied from a cord
extension set or electrical portable outlet
device it should be positioned so that it is not
subjected to splashing or ingress of
moisture.

Please ...

• Have only a qualified person install, repair,
or replace parts on washer.

• Maintain washer properly.

• Protect washer from the weather and keep
it where the temperature will not fall below
freezing.

• Do not install the washer at a place of
extremely high humidity. It could cause an
electric shock or a short circuit.

• Connect washer to the correct outlet,
electrical supply, water supply, and drain
supply.

Save these instructions

Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the
following basic precautions.

Understanding your responsibilities

• Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same
wash. Hazardous fumes can form.

• Unplug power supply cord before attempting to service your washer.

• Do not wash fiberglass material.

Small particles can stick to fabrics washed in following loads and cause skin irritation.

• Do not spray water on the control panel of the washer.

It could cause fire or an electric shock.

• In case of the dual valve model, if you connect only cold water inlet valve, while water
temperature is selected as hot or warm, there can be water leakage from unconnected water
inlet valve.

• This appliance must be grounded.

To avoide electrical shock, use a metal pipe for the ground connection.

WASHER SAFETY

DWD-AD123'S(영)_요르단 ZHRN.indd 3 2017. 7. 11. 오후 2:00

4

WASHER & DRYER SAFETY

The operator's manual or card
should be read before
continuing the operation.

The marked item can be hot
and should not be touched
without taking care.

• Fabric softeners, or similar products, should
be used as specified by the fabric softener
instructions.

• The final part of a tumble dryer cycle occurs
without heat (cool down cycle) to ensure that
the items are left at a temperature that
ensures that the items will not be damaged.

• Remove all objects from pockets such as
lighters and matches.

• The appliance must not be installed behind a
lockable door, a sliding door or a door with a
hinge on the opposite side to that of the
tumble dryer, in such a way that a full opening
of the tumble dryer door is restricted.

• Do not unplug the power cord when washing
machine is operating. If you unplug and
reconnect the power cord during the washing
or drying cycle forcibly, it may cause electric
shock, fire or damage of the washing
machine.

• Do not open the washing machine door
forcibly when washing machine is operating.
If you open the door in the washing or drying
cycle forcibly, it may cause injury or damage
of the washing machine.

• If you want to open the door when washing
machine is operating, must drain the water in
the tub firstly. Make sure no hot water is left
inside of the Tub. Otherwise, it may cause
injury or damage of the washing machine.

• The appliance is not to used by persons
(including chidren) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be
made by children without supervision.

• The tumble dryer is not to be used if industrial
chemicals have been used for cleaning.

• The lint trap has to be cleaned frequently, if
applicable

• That lint must not to be allowed to
accumulate around the tumble dryer

• Do not dry unwashed items in the tumble
dryer.

• Items that have been soiled with substances
such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes
and wax removers should be washed in hot
water with an extra amount of detergent
before being dried in the tumble dryer.

• Items such as foam rubber (latex foam),
shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted
with foam rubber pads should not be dried in
the tumble dryer.

Understanding your responsibilities

Caution, risk of fire and burn

Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a
tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates
heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or
storing oil-affected items can prevent heat from escaping and so create a fire hazard.

If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by
hair care products be placed in a tumble dryer they should first be washed in hot water with extra
detergent - this will reduce, but not eliminate, the hazard.

WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are

quickly removed and spread out so that the heat is dissipated.

DWD-AD123'S(영)_요르단 ZHRN.indd 4 2017. 7. 11. 오후 2:00

5

Removing transit bolts

1. Before operating the washer, remove the
transit bolts(4ea) along with the rubber.

• If the bolts are not removed, it may cause

heavy vibration, noise and malfunction.

2. Unscrew the 4 bolts with the spanner
supplied. Keep the 4 bolts and spanner for
future use.

• Whenever the appliance is transported, the
transit bolts must be refitted.

3. Close the holes with the cap holders supplied.

Location of washer

• Check location where the washer will be installed. Make sure you have everything necessary
for correct installation.

• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.

• Do not place or store laundry products on top of washer at any times.

• Install the washer on the horizontal solid floor.

If the washer is installed on an unsuitable floor, it could make

considerable noise, vibrate severely and cause a malfunction. If the
washer is not level, adjust leg up or down for horizontal installation.

• Ventilation openings must not be obstructed by carpeting when the
washer is installed on a carpeted floor.

• Carpet does not obstruct the openings for washing machines with
ventilation openings in the base.

• Leave some space (right & left : 2cm, rear : 10cm).

• In case of built-in installation, the distance between top of the
washer and bottom of upper plate should be at least 50cm

INSTALLATION INSTRUCTIONS

Drain Hose

Washer

Laundry

Tub

approx.

2cm

DWD-AD123'S(영)_요르단 ZHRN.indd 5 2017. 7. 11. 오후 2:00

6

INLET HOSE CONNECTION

The new hose-sets supplied with the appliance are to be used and old hose-sets should not be
reused.
In using only one water tap or in case of only one water inlet valve, connect the inlet hose to the
cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet.

For Ordinary Tap

1 Pull down the collar of the

inlet hose to separate it
from the water tap
adapter.

2 Loosen the four screws

properly in order to fit into
water tap.

3 Fit the water tap adapter

into the water tap and
tighten the four screws
evenly while pushing up
the adapter so that the
rubber packing can stick
to the water tap tightly.

1 Connect the inlet hose to

the water tap by screwing
the connector tightly.

2 Connect the connector-

inlet supplied if necessary.

3 Connect the inlet hose

adapter to the water inlet
of a washer and turn it to
be fixed.

4 Remove the tape, and

screw connector B into
connect A tightly.

5 Connect the inlet hose to

the water tap adapter by
pulling down the collar of
the hose end.

6 Connect the inlet hose

adapter of the hose to the
water inlet of the washer
by turning it clockwise to
be fixed tightly.

For Screw-Shaped Tap

• Please check the rubber packing
present inside the inlet hose
adapter of the hose.

*Check the

packing in the
inlet.

Connector B
Connector A

Connector

Hose Connector

Rubber
Packing

Connector

inlet

Connector

Hose Connector

Rubber
Packing

TAPE

DWD-AD123'S(영)_요르단 ZHRN.indd 6 2017. 7. 11. 오후 2:00

7

WARNING

Electrical shock hazard : Failure to follow these instructions could result in death or serious

injury.

• Electrical earth is required on this washer

• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.

• Don’t earth to a gas pipe.

• Don’t change the power supply cord plug.

• Check with a qualified electrician if you are not
sure the washer is properly earthed.

Recommended earthing method

For your personal safety, this washer must be earthed.

This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’.To

minimize possible shock hazard, the cord must be plugged into a mating earthing-

type wall receptacle ‘C’. If a mating wall receptacle is not available, it is the personal

responsibility and obligation of the customer to have the proper earthed wall
receptacle installed by a qualified electrician.

ELECTRICAL REQUIREMENTS

Drain system

• Never forget to install drain hose before operating your washer.

• Open the packing box, and there is a drain hose inside the drum.

• Connect the drain hose to the drain outlet at the back side of the washer.

• Proper securing of the drain hose will protect the floor from damage due to water leakage.

• When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise.

• For Pump Model
Top of laundry tub must be at least 60cm high and no higher than 100cm For Pump Model of washer.

When installing the drain hose to tub(sink), secure it tightly with a string.

• For Non-Pump Model

If you need to extend drain hose,
contact the sales agent, or service center.

Level adjustment

1 If the washer is installed on an unsuitable floor,

it could make considerable noise, vibrate and
cause a malfunction.

For extending the drain hose, the type of end of drain hose to be used is not "ㄱ" type, but "-" type.

contacting outlet

Connect the ㄱ- type end
of drain hose to the end
of contacting outlet securely.

less than 1m

less than
10cm

Height of drain

hose

Length of drain

hose

if the height of drain hose is
elevated in the middle

less than 10cm less than 1m

If not the height of drain hose
is elevated in the middle

– less than 3m

C

B

A

max. 100 cm

min. 60 cm

ca. 105 cm

Laundry tub

Hose

Retainer

Tie

strap

max. 100 cm
min. 60cm

max. 100 cm
min. 60cm

DWD-AD123'S(영)_요르단 ZHRN.indd 7 2017. 7. 11. 오후 2:00

8

2 Adjust the level of washer using adjustable legs.

• Please check if there is any gap between
thefour adjustable legs and the floor.

• Turning adjustable legs by the enclosed
spanner, adjust the level of washer and
make it sure that there is no swaying of
washer.

• After the adjustment is finished, turn the
fixing nuts up tightly so that the washer maintains the
adjustment.

3 Make it sure that the washer does not sway when you press

down the four corners of the washer's top plate.

NOTE

There should be no swaying of washer and all the
adjustable legs should stick to the floor closely.

OPERATING YOUR WASHER

adjustable leg

Fixing Nut

To obtain the best washing results, you must operate your washer properly.
This section gives you this important information.

• Close zippers, snaps, and hooks to avoid
snagging other items.

Remove pin, buckles, and other hard objects

to avoid scratching the washer interior.

• Empty pockets and pull them inside out.

• Turn down cuffs and turn synthetic knits
inside out to avoid pilling.

• Tie strings and sashes to avoid tangling.

• Treat spots and stains.

Preparing clothes for washing

DWD-AD123'S(영)_요르단 ZHRN.indd 8 2017. 7. 11. 오후 2:00

9

• Separate heavily soiled items from lightly soiled ones, even if they would normally be washed
together.

• Separate dark colors from light colors, colorfast items from non-colorfast item.

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
Color (White, Lignts, Darks) Separate white clothes from colored clothes.
Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.

Sorting

• Drop items into washer loosely. Items
should move easily through wash water for
best cleaning and wrinkle-free results.

• Load washer properly and select correct
load size setting.

Overloading and selecting a setting too

small for the wash load can :

- Cause poor cleaning

- Increase wrinkling

- Create excessive lint

- Wear out items faster (because of pilling)

• Mix large and small items in each load.
Load evenly to maintain washer balance.

An unbalanced load can make the washer

vibrate during spin.

• Reduce wash time when using a small load
size setting. Load with only a few small
items needs less wash time.

• Use a large load size setting to reduce
wrinkling with permanent press clothes and
some synthetic knits. These items should
have more room to move in the water than
heavy items. (towels, jeans)

Loading

DWD-AD123'S(영)_요르단 ZHRN.indd 9 2017. 7. 11. 오후 2:00

10

Auto Dispense

Washable Cover

Directions for Using Liquid Detergent • Fabric Softener

Open detergent box and add detergent and fabric softener. Close box.

Note Wait! Make sure to read the following before putting in detergent.

• Do not put in too much detergent. Otherwise, bubbles form excessively and will not rinse off well.
In some cases, bubbles may overflow.

• When detergent is smeared on plastic parts, such as door or control panel, make sure to wipe it
immediately. Otherwise, detergent may damage product.

• Detergent may harden if powder detergent compartments for main washing and rough washing
are wet. Before putting in powder detergent, make sure to wipe compartment with dry cloth.

• Please refrain from using highly concentrated liquid detergent or fabric softener, washing machine
may not work

1 Auto Liquid Detergent Compartment

• Liquid detergent will be automatically inserted into machine.

• Do not put in fabric softener or powder detergent. This may cause breakdown of puoduct.

• When detergent is not enough, display panel will display 'Refill'.

2 Auto Fabric Softener Compartment

• Fabric softener will be automatically inserted into machine.

• Do not put in liquid detergent or powder detergent. This may cause breakdown of product.

• When fabric softener is not enough, display panel will display 'Refill'.

3 Manual Powder Detergent Compartment

• Insert the proper amount of detergent in conformity with the instruction of the detergent
manufacturer.

• A use of a large amount of detergent more than the recommended amount can cause many
soapsuds and the overload to the motor.

In addition to, this will deteriorate the washing and rinse performance.

4 Manual Fabric Softener Compartment

• Pour liquid fabric softener into the dispenser using the amount recommended of the softener
manufacturer.

• Do not exceed the maximum fill line.

Overfilling can cause early dispensing of the fabric softener which could stain clothes.

1 2

3

4

DIRECTIONS FOR USING INLET BOX

DWD-AD123'S(영)_요르단 ZHRN.indd 10 2017. 7. 11. 오후 2:00

11

Notes for Detergent Use

• Do not put in liquid detergent and fabric softener in excess of the lines marked in compartments. Excessive

liquid detergent and fabric softener may flow out of compartments.

• Do not place foreign substances in powder detergent, liquid detergent and fabric softener compartments.

This may block inlets or cause breakdown of product.

• For cleaning of automatic input device, see Page 32~33.

• Refer to detergent quantity table and use the right amount per detergent type.

• Using excessive detergent causes the following problems. This may result in breakdown of the product.

- Excessive foam increases rinsing time. Normal rinsing and spin-drying may not be possible.

- As pressure increases by foam, foam may leak or flows backward through the front of detergent box or

the back of ventilating opening.

- Foam may not be completely removed after rinsing.

• Dirt or detergent remnants may stick to detergent box. Clean detergent box once a week or so to use

product more cleanly.

• For rough washing, put in half the amount of detergent for main washing.

• For this drum washing machine, the standard water level for washing is 35L~40L.

DWD-AD123'S(영)_요르단 ZHRN.indd 11 2017. 7. 11. 오후 2:00