Daewoo DTY-29G1 User Manual

Colour Television

DTY-29G1

Instruction Manual

P/N:48586775E208

IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL

LOCAL CONTROL

Front	Back
AUDIO
VIDEO L R	PR

MAIN

VIDEO

AUDIO

HEAD

STAND-BY

REMOTE

AV

VOLUME

PROGRAMME

SCART

AERIAL

SCART

POWER

INPUT

INPUT

PHONE

INDICATOR

SENSOR

BUTTON

DOWN/UP

DOWN/UP

SOCKET1

TERMINAL

SOCKET2

BUTTON

BUTTONS

BUTTONS

REMOTE CONTROL

TV mode

1POWER

2NUMBER 0-9

3MENU

4AV

5PR (CURSOR)UP

6VOLUME UP (CURSOR RIGHT)

7OK(NORMAL)

8PR(CURSOR) DOWN

9VOLUME DOWN(CURSOR LEFT) AMUTE

BRECALL

CSLEEP

DSKIP

EMOVE

FDELETE

GTELETEXT

HAUDIO MODE ITIME

		1	TELETEXT mode
1	2	3	1POWER
4	5	6	2NUMBER 0-9
		2	3MENU
7	8	9	4Not Used
	0	MENU	5PAGE UP
			6SUBPAGE
4		3
			7INDEX
NORMAL	PR	5	8PAGE DOWN
			9HOLD
9		6
	OK		AMUTE
8		7	BREVEAL
	PR		CSIZE
SLEEP		10	DCANCEL
		RECALL
12		11	EG (VOLUME UP)
DEL	MOVE	SKIP	FR (VOLUME DOWN)
15		13
TIME	MODE		GTV
		14	HC (BRIGHT UP)
17		16	IY (BRIGHT DOWN)
18

1

CONTENTS

* Identity of features on Local and Remote Control	1
* Important safeguards	2
* Installation	3
After moving the set	3
Inserting Batteries into the Remote Control Unit	3
Aerial connection	3
Mains connection	4
Switching the set on and off	4
Tuning the TV Channels	5
Edit	5
Manual Channel Setting	6
* Daily use	7
Selecting a Programme Number	7
Volume, Picture and Sound control	7
Timer	8
Sleep	8
Recall	8
Child Lock	9
Time	9
Mode	9
* Teletext	10
* Connecting the External Equipment	12

IMPORTANT SAFEGUARDS

Water / Moisture : Never install the set in the following places:in the bathroom, in a wet basement.

Do not place any containers with liquid (e.g. flower vases) on the set. Heat : Never place the set near heat sources (e.g. radiator).

Ventilation : Do not cover the ventilation openings in the cabinet.

Never place the set in a confined space such as a bookcase or built-in-cabi- net, unless proper ventilation is provided.

Object Entry : Do not insert foreign objects, such as needles and coins, into the ventilation openings.

Lightning Striking: You should disconnect your set from the mains and the aerial system during thunderstorms.

Cleaning : Unplug the set from the mains before cleaning.

2

INSTALLATION

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the MAIN POWER button must be switched off for at least 15 minutes in order to take out a colour strain on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover, Insert the batteries supplied(two 1.5v, type AA).

Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.

Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is the most important.

If you are located in a relatively strong area, you will be able to use the indoor aerial.

When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.

3

MAINS CONNECTION

Plug the mains cable into the power socket with 230V 50Hz AC.

SWITCHING THE SET ON AND OFF

Switching On

Switch the set on with the MAIN POWER button, ( ). The set will turn on.

If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the UP/DOWN button or one of the NUMBER button 0..9 on the remote controller.

The STAND-BY INDICATOR will turn off and a picture will appear on the screen.

Switching off

Press POWER button ( ) on the remote controller to return the set to its stand-by mode.

The STAND-BY INDICATOR will illuminate.

If you don't use the set for extended period of time, turn it off with MAIN POWER button .

4