DAEWOO DTQ-26S4SS, DTQ-29S4SC, DTQ-29S4FC Service Manual
1
SERVISE PARTS LIST
8
6
22
14
1
7
13
12
11
6
5
4
2
234
5
coupler
6
S7 PTRN NORMAL
ALIGNMENT INSTRUCTIONS
7
MODE ADJUSTMENT
DATA
REMARKS
INITIAL RANGE
S2 Screen Adjustment
Auto RF AGC
Video Level (VIDEOL) 7 0~7 Must be set to 7
S5
RF AGC Delay (RFAGCD) 30 0~63 Align RF AGC threshold
FM Level (FM.LEV) 20 0~31 Must be set to 20
AGC Point 3.75 Select AGC reference voltage
A/D VALUE
H-PHASE 10 0~31 Align sync flyback pulse, using internal cross pattern(S7)
H-SIZE 43 0~127
P-CUSHION 32 0~63
V-POSI 29 0~63 Align Vertical DC bias, using internal cross pattern(S7)
V-SIZE 110 0~127 Align Vertical amplitude, using internal cross pattern(S7)
S6 V-LIN 13 0~31 Must be set to 16
V-S 12 0~31
TILT 37 0~63
TOP-C 8 0~15
BOT-C 8 0~15
V-SIZE-C 7 0~7
NO SD POWER OFF YES Automatically turn off in 15min for no received signal.
ABL-POINT 0
BK-LEVEL 0
BK-START 3
BRI-STOP 0
Y-CORING 0
PRE-SHOOT 3
DC-REST 3
S7-1 W.PEAK 1
FIESH 0
OSD-GAIN 0
OSD-GRAY 0
OSD-SW 0
HT-SW 0
HT-LEVEL 0
C-BPF 0
C-KILL 1
RB-ANGLE 15
G-ANGLE 0
S7-2 C-EXT 0
FILTER 1
TRAP-TEST 0
CORING-GN 3
H-SIZE-CP 4
Red Drive (RD) 0~127 Align RED OUT AC level
S8
Green Drive (GD) 15 0~15 Must be set to 10
Blue Drive (BD) 0~127 Align BLUE OUT AC level
Red Bias (RB) 0~255 Align RED OUT DC level
Green Bias (GB) 127 0~255 Align GREEN OUT DC level
Blue Bias (BB) 0~255 Align BLUE OUT DC level
SCR R-BIAS 0 0~255
SCR G-BIAS 127 0~255
SCR B-BIAS 0 0~255
S8-2 SCR R-DRIVE 64 0~127
SCR G-DRIVE 10 0~127
SCR B-DRIVE 64 0~127
SCR BRIGHT 110 0~127
SUB BRIGHT 90 0~127
CONTRAST 27 0~127
TINT 35 0~127
S9
COLOR 27 0~127
SHARPNESS 7 0~127
FM/AM PRE 33 0~127
SCART PRE 33 0~127
MONI. VOL 60 0~127
Internal Black Display Internal Black Pattern
S11
Internal 100% White Display Internal 100% White
Internal 60% White Display Internal 60% White
Internal Cross Pattern Display Internal Cross Pattern
S12 Forwarding Mode Factory Initialization
Table-B
8
NOTE
9
10
35
27
0
127
0
64
10
64
110
Loading...