Daewoo DTD-14H9 User Manual

TV / DVD COMBO

OWNER'S MANUAL

Model: DTD-14H9

IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS

1 Read Instructions - All the safety and operating instructions should be read before the appliance is

operated.
2 Retain Instructions - The safety and operating instructions should be retained for future reference.
3 Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be followed.
5 Cleaning - Unplug TV/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.
6 Attachments - Do not use attachments not recommended by the TV/DVD manufacturer as they may cause

hazards.
7 Water and Moisture - The apparatus shall not be exposed to dripping or splashing water and that no

object filled with liquids, such as vases, shall be placed on the apparatus.
8 Accessories - Do not place this TV/DVD on an unstable cabinet, stand,

bracket, or table. The TV/DVD may fall, causing serious injury to someone,

and serious damage to the appliance. Use only with a cabinet, stand, bracket,

or table recommended by the manufacturer, or sold with the TV/DVD. Any mounting

of the appliance should follow the manufacturer’s instructions and use a mounting

accessory recommended by the manufacturer. An appliance and cart combination

should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cabinet combination to overturn.

PORTABLE CABINET WARNING

9 Ventilation - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to

ensure reliable operation of the TV/DVD to protect it from overheating, and these openings must not be

blocked or covered. The openings should never be blocked by placing the TV/DVD on a bed, sofa, rug, or

other similar surface. This TV/DVD should never be placed near or over a radiator or heat register. This

TV/DVD should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been adhered to. Around the unit, the space should be more

than 10cm.
10 Power Sources - This TV/DVD should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or

local power company.
11 Grounding or Polarization - This TV/DVD is equipped with a polarized alternating - current line plug (a

plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a

safety feature. If you are unable to insert the plug fully into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12 Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them, paying particular attention to cords at plugs, and the

point where they exit from the appliance.
13 Lightning - For added protection for this TV/DVD receiver during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the TV/DVD due to lightning and power-line surges.
14 Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as

1

contact with them might be fatal.

15 Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or

electric shock.
16 Object and Liquid Entry - Never push objects of any kind into this TV/DVD through openings as they

may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the TV/DVD.

17 Servicing - Do not attempt to service this TV/DVD yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

18 Damage Requiring Service - Unplug this TV/DVD from the wall outlet and refer servicing to qualified

service personnel under the following conditions:
A. When the power-supply cord or plug is damaged or frayed.
B. If liquid has been spilled, or objects have fallen into the TV/DVD.
C. If the TV/DVD has been exposed to rain or water.
D. If the TV/DVD does not operate normally by following the operating instructions. Adjust only those controls

that are covered by the operating instructions, as improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the TV/DVD to its

normal operation.
E. If the TV/DVD has been dropped or damaged in any way.
F. When the TV/DVD exhibits a distinct change in performance - this indicates a need for service.

19 Replacement Parts - When replacement parts are required, be sure the service technician has used

replacements parts specified by the manufacturer that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

20 Safety Check - Upon completion of any service or repairs to this TV/DVD, ask the service technician to

perform routine safety checks to determine that the TV/DVD is in proper operating condition.

21 Heat - This TV/DVD product should be situated away from heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that produce heat.

22 Secondary Switch - When switching off, the apparatus is not completely switched off from the mains. To

disconnect it from the mains, you have to unplug mains.

2

IMPORTANT SAFEGUARDS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICE­ABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SER­VICE PERSONNEL.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS
LASER

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product
please read this owner’s manual carefully and retain for future reference. Should the unit
require maintenance, contact an authorized service location - see service procedure. Use of
control adjustments or the performance of procedures other than those specified may result
in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient mag­nitude to constitute a risk electric shock.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and servicing instructions in the literature
accompanying the appliance.

DANGER Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CAUTION Do not open the top cover. There are no user serviceable parts

inside the Unit; leave all servicing to qualified service

CLASS 1
LASER PRODUCT

personnel.

CAUTION : Any changes or modification in construction of this device which are not

expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

3

Table of Contents

Before use ....

IMPORTANT SAFEGUARDS 1
Table of Contents 4
Identification of Controls 5
Remote Control 7

Installation ....

Basic Installation 10
Connecting to Various Equipment 11

Basic TV operation ....

Watching TV 13
TELETEXT 14
Setting TV 15

To Display the Setting Screen 15
Setting Picture 16
Setting Sound 17
Installing Channels 18
Setting Other Features 21

DVD Operation ....

Advantages of this Product Are 22
Playing the DVD video disc 23

Basic Playback 23

Playing a desired scene 24

To skip scenes in a disc 24
Directly moving to a desired title
Playing Programmed order 25
Repeating a defined period 25
Repeating a defined period from
A to B 26
Searching DVD with a title number,
a chapter number or a time 26
Searching VCD, CD and MP3 with a
track or track time 27

Confirming the current PLAY mode on screen

Confirming the current DVD disc mode 28
Confirming the current SVCD disc mode
Confirming the current VCD disc mode 29
Confirming the current CD,MP3, JPEG
disc mode 29

Selecting an AUDIO language, SUBTITLE
language and 3D AUDIO 30

Selecting an audio language 30
Selecting a subtitle language 30
Selecting 3D Audio 30

Selecting ZOOM and Multi Angle 31

Using a zoom function 31
Multi Angle 31

About MP3 and JPEG discs 32

Playing a disc containing MP3, JPEG files

Displaying menus in a disc 34

To display menus in a disc 34
LANGUAGE Setup 35
VIDEO Setup 36
AUDIO Setup 36
Other Setup 37

24

28

28

32

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.

Others

About DVD 38

Playable Disc 38
REGION MANGEMENT Information 38
Terms related with DVD 39
Disc 40
Region Code 40

Before suspecting fauls with the DVD 41
Before Calling Service Personnel 42
Specification 43

4

Main Body (Front Part)

5

Identification of Controls

POWER button (Power of TV/DVD is fully intercepted.)
OPEN/CLOSE button (For opening /closing disc tray)

PREVIOUS button

PLAY/PAUSE button

NEXT button

STOP button
REMOTE SENSOR

STAND-BY indicator
TV/AV/DVD MODE CONVERT button

TV VOLUME button
TV CHANNEL button

Speaker Left Disc Loading

Tray

Speaker Right

Main Body (Rear Part)

Identification of Controls

POWER
CORD

SCART Jack

CONNECTION
to ANTENNA
CABLE

6

Remote Control

Remote Control Buttons

POWER button

If you press POWER button on remocon under the POWER button in the
front part of TV/DVD, you can turn on/off the TV/DVD.

DISPLAY button

Operating status and GUI(Graphic User Interface) menu are displayed in
a screen.

TV/AV, DVD button

You can select input mode.

NORMAL button

NORMAL I/ NORMAL II/ FAVOURITE picture control

NUMBER button

You can enter the relevant number directly or select a desired channel.

SLEEP button

You can set automatic POWER OFF(0, 20, 40, 60, 80, 100, 120).

F.R/SLOW or F.F/SLOW button

You can search screen whilst playing back or forward.
Slow screen is displayed whilst pausing.

STOP button

PREV/NEXT(BACK STEP/STEP) button

You can skip a screen whilst playing back or forward.
Back Step/Step screen is displayed whilst pausing.

PLAY/PAUSE button

Start playback of the disc contents. Pause screen whilst playing.

TV MENU button

The Menu screen relating to TV is displayed.

VOLUME button

CURSOR( ), CHANNEL SELECT button

This button functions as cursor or channel select button in setting
TV/DVD and operating TV respectively.

MUTE button

Press this button if you only want to turn off the sound.

7

OK/ENTER button

Press this button if TV or DVD setting is complete.

Remote Control

DVD MENU button

The DVD menu screen is displayed.

AUDIO button

You can select the desired audio language.

SUBTITLE button

You can select the desired subtitle language.

DISC TRAY OPEN/CLOSE button

SETUP button

You can set the DVD player.

REPEAT button

You move into REPEAT mode whenever you press this button.

A-B REPEAT button

You can play the given sections repeatedly.

TITLE/PBC button

You can select the desired title.

Angle button

You can select the desired screen angle.

ZOOM button

You can zoom in a screen.

PROGRAM button

You can program the desired playing order.

CLEAR button

You can clear settings.

SEARCH button

You can search the scene that you want.

SOUND MODE button

You can select the desired audio mode when watching TV.

ASPECT button

You can modify TV Aspect in TV/AV/DVD Mode.

3D button

You can set Sound Fields.

8

Basic Installation

Connecting the Antenna Cable

Outdoor antenna or

wall antenna outlet

If TV picture is not clear, it usually result from the wrong antenna connection.
Please install the antenna in the proper place and in the right direction.

Connecting a SCART SOCKET

This connection is used to connect this player to an external device (VCR, CAMCORDER, DVD) and to
be displayed in TV/DVD. If the peripheral is powered on in TV mode, some peripherals are converted into
AV mode automatically and displayed. Otherwise, you should press the TV/AV/DVD button to convert into
AV mode. Pin specification of SCART SOCKET is as follows.

PIN Signal Designation Matching Values

1 Audio Out (linked with 3) 0.5Vrms, Imp < 1kΩ(RF 60% MOD)
2 Audio In (linked with 6) 0.5Vrms, Imp > 10kΩ
3 Audio Out (linked with 1) 0.5Vrms, Imp < 1kΩ(RF 60% MOD)
4 Audio Earth
5 Blue Earth
6 Audio In (linked with 2) 0.5Vrms, Imp > 10kΩ
7 Blue In 0.7Vp-p±10%, Imp 75Ω
8 Slow (Function) Switching TV:0~2V, 16:9: 4~8V, Peri:9.5~12V, Imp>10kΩ

9 Green Earth
10 NC
11 Green In 0.7Vp-p±10%, Imp 75Ω
12 NC
13 Red Earth 0.7Vp-p±10%, Imp 75
14 NC
15 Red In 0.7Vp-p±10%, Imp 75
16 Rapid Blanking, Switching Logic 0: 0~0.4V, Logic 1: 1~3V, Imp 75Ω
17 Video Earth
18 Rapid Blanking Earth
19 Video Out 1.0 Vp-p±10%, Imp 75Ω
20 Video In 1.0 Vp-p±10%, Imp 75Ω
21 Common Earth

10

Connecting to Various Equipment

Connecting to a Camcorder or Other Video Player

Connection with SCART Jack (AV)

Connect the SCART jack of your video player (or camcorder) to SCART terminal of TV/DVD with SCART
jack.

11

13

W atching TV

1
2

3
4

To turn on the TV, press the [ON/OFF] button in the front
part of the set. Now TV set is in STANDBY status.
Then, press the power button on the remote control.

Selecting the Channel.

Press the PR [ , ] button or [Number] button to select the desired
channel. If input status is set to AV or DVD, press the [TV/AV/DVD] button
to select TV.

Adjusting the Volume.

Press the [ VOL] button to decrease the volume level or [VOL ] button to
increase the volume level.

To turn off the TV, press the [ ] button on the remote
control.

Pressing the ON/OFF button of the set will clear the clock memory. If you
press the power button on the remote control instead of pressing the
ON/OFF button in the front part of the set, The set will be stand-by state.
And stand-by LED becomes RED.

14

TELETEXT

SWITCHING TELETEXT ON/OFF

Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the
TV mode.

COLOUR BUTTONS IN TELETEXT

A red, green, yellow and cyan field is shown at the bottom of the screen.If FASTEXT is transmitted by the station,
by pressing the corresponding cursor button on the remote controller you can easily select the desired page .

SELECTING PAGES

The NUMBER buttons 0...9 are used to enter a page number. The selected page number appears at the top of
the screen and the page appears after a short time. The UP/DOWN buttons increase or decrease the current
page number by 1.

INDEX PAGE

You can switch directly to the overview page of the station you are currently viewing by pressing the INDEX
button ( ).

PAGE HOLD

Several sub pages can be combined under a page number and are scrolled at an interval determined by the TV
station. The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you
are looking at the 3rd page of a total of 6 pages.
If you want to look at a subpage for a longer period of time, press the HOLD button ( ). The contents of the
subpage shown are kept on the screen and no longer updated or switched to other subpages. Pressing the HOLD
button again, the current subpage appears.

CALLING UP SUBPAGE DIRECTLY

Pressing the SUBPAGE button ( ) “Page no/...” appears at the bottom of the screen. Enter the subpage number
that you want to call up with the NUMBER button 0...9, for example, the 2nd page. sequence 0002. The desired
subpage is sought and displayed after a while. To exit, press SUBPAGE button ( ) again.

WATCHING TELEVISION DURING TELETEXT MODE

Some pages are continually updated, for example, stock market reports, sports announcement, and the latest
news. If you want to watch TV and stay informed at the same time, press CANCEL button ( ).
The regular programme is still visible and the teletext symbol ( ) appears at the top of
the screen. Pressing the CANCEL button again, the teletext page appears with the updated information.

REVEAL ANSWER

This function can be used on certain pages to reveal the solution of riddles. Press the REVEAL button ( ) to
reveal a hidden answer and press again to hide it.

TV/TELETEXT ( )

Watch the TV programme and the Teletext pages simultaneously. The next press returns to the normal display.

BRIGHTNESS CONTROL IN TELETEXT MODE

Press the MENU button in teletext mode, the brightness control menu will be displayed in the bottom of the
screen. You can adjust brightness using the corresponding cursor button on the remote controller.

DOUBLING CHARACTER SIZE

Repeatedly pressing the SIZE button ( ) doubles the character size in the following order.
Upper half of the page Lower half of the page Return to normal size.

To Display the Setting Screen

15

1
2

3
4

Press the [TV MENU] button in TV
mode.

TV setting menu is displayed.

Press the [

,

] button to select the desired item.

Current settings and variable settings for the desired item are displayed in the
screen.

• PICTURE

• SOUND

• INSTALL

• FEATURES

Press the [OK] button and press the [,] button to set the
desired item, then press the [OK/ENTER] button.

Additional steps may be required as items.

Press the [TV MENU] button to exit the current setting menu.

Setting TV

PICTURE

SOUND

INSTALL

FEATURES

Position AccessOK
ExitMENU

Setting Picture

Setting TV

1
2

Press the [
setting screen to select “PICTURE”
and press the [OK] button.

Setting menu is displayed.

Press the [
the [

Current settings and variable settings for the desired item are displayed in the
screen.

• BRIGHTNESS: Adjust the picture until correct brightness is obtained.

• CONTRAST: Adjust brightness and darkness among objects and background

• COLOUR: Adjust colour to display natural human’s face colours.

• SHARPNESS: Adjust outlines of objects on screen to be smooth and clear.

• TINT: TINT adjustment is displayed if you receive NTSC through

,

in the screen.

AV input.

,

] button in TV

BRIGHTNESS

CONTRAST

COLOUR

SHARPNESS

,

] button to select the desired item, then press

] button to set the desired item.

PICTURE

Position
ExitMENU

Adjust

3

Press the [TV MENU] button after setting is completed.

16

Setting Sound

SOUND

VOLUME

BALANCE

BASS
TREBLE

EFFECTS MONO

Position
ExitMENU

Adjust

Setting TV

1

2

Press the [
screen to select “SOUND”, then
press the [OK] button.

Setting menu is displayed.

Press the [
the [

Current settings and variable settings for the desired item are displayed on the
screen.

,

• VOLUME

• BALANCE

• BASS

• TREBLE

• EFFECTS: You can select an item from either STANDARD,

,

] button in TV setting

,

] button to select the desired item, then press

] button to set the desired item.

MUSIC, MONO.

Press the [TV MENU] button after setting is completed.

3

17

19

Setting TV

4

Setting SYSTEM

Press the [ , ] button in the INSTALL screen to select “SYSTEM” if the
automatic tuning did not already select this correct system.
Select a TV broadcasting type among EURO, E/EURO, FRANCE, and GB with
[ , ] button while the cursor points to SYSTEM.

5

Setting CHANNEL

Press the [

,

] button in the INSTALL screen
to select “CHANNEL”.
Select a channel with the [

,

] button or
[NUMBER] button while the cursor points to
CHANNEL. Press the [OK] button to select
either Cable or Air.

INSTALL

ATSS
EDIT
SYSTEM

CHANNEL

FREQUENCY
NAME
PROGRAM
STORE TO

Position

0...9
OK

ExitMENU

Adjust
Adjust
Cable/Air

GB

EURO

C 05

175.25

03
03

6

Setting FREQUENCY

Press the [

,

] button in the INSTALL screen
to select “FREQUENCY”.
While the cursor points to FREQUENCY, you
can start Manual Tuning by pressing the [
,]button over 2 seconds. Also, you can start
Fine Tuning step by step when you press the
button quickly.
To save adjusted values, you should save
PROGRAM with STORE TO after adjusting.

7

Setting NAME

* STATION NAME is mapped as broadcasting

ID. If there is no broadcasting ID, STATION

NAME is displayed as “- - - - -”.
Press the [ , ] button in the INSTALL screen
to select “NAME”.
Enter the Modify mode by pressing the [

,

]

button while the cursor points to NAME.
Press the [ , ] button, characters are
displayed in order.
You can set a NAME consisting of 5
characters.
Press the [OK] button to save the settings.

INSTALL

ATSS
EDIT
SYSTEM
CHANNEL

FREQUENCY

NAME
PROGRAM
STORE TO

Position

0...9

ExitMENU

Fine Tune
Adjust

GB

EURO

C 05

175.25

03
03

INSTALL

ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY

NAME

PROGRAM
STORE TO

Adjust

ExitMENU StoreOK

Access

20

Setting TV

INSTALL

ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME

PROGRAM

STORE TO

Position

0...9

ExitMENU

Adjust

Adjust

GB

EURO

C 05

175.25

- - - -

03

03

8

Setting PROGRAM

Press the [

,

] button in the INSTALL screen
to select “PROGRAM”.
Press the [

,]button to set the desired PR
while the cursor points to PROGRAM.
Whilst doing this channel as well as STORE TO
are also changing.

INSTALL

ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM

STORE TO

Position

0...9
OK

ExitMENU

Adjust
Adjust
Store

GB

EURO

C 05

175.25

- - - ­03

03

9

Setting STORE TO

* This function is used to save PROGRAM
Press the [

,

] button in the INSTALL screen
to select “STORE TO”.
Press the [OK] button to store settings while the
cursor points to STORE TO, and then the
number which a program stored to will flash
red once.

Setting Other Features

FEATURES

LANGUAGE

CHILD LOCK

CLOCK

WAKE TIME

WAKE PR

NR

GB

ON

- - : - -

11:43

09

OFF

Position
ExitMENU

Adjust

Setting TV

1
2

Press the [
setting screen to select “FEATURES”
and press the [OK] button.

Setting menu is displayed.

Press the [
the [

Current settings and variable settings for the desired item are displayed in the
screen.

• LANGUAGE

• CHILD LOCK: Buttons in Setting menu are not operated (except ON/OFF

• CLOCK

• WAKE TIME: TV is turned on automatically at the desired time.

• WAKE PR: Desired channel is turned on automatically at the desired time.

• NR(Noise Reduction)

,

SW). Only remote controller operates and standby LED blinks.

,

] button in the TV

,

] button to select the desired item and press

] button to set the item.

21

Press the [TV MENU] button after setting is completed.

3

AUTO CLOCK SET

Normally the clock will set itself automatically if this channel set to PR01 has teletext.
However, if PR01 doesn’t have teletext the clock will have to be set manually.
NB. Remember the clock setting will be lost if the On-Off button on the front of the set
is operated. If the clock was already set, the auto clock set function doesn’t work.

22

Advantages of This Product Are.....

• DVD, VCD, CD, CD-R (MP3, JPEG), CD-RW
playback function

• MP3, JPEG file playback function (CD-R
disc having records of MP3, JPEG files)

• GUI (Graphical User Interface) OSD (On
Screen Display)

By using the [DISPLAY] button on the remote
control, information on the DVD/VCD/CD
player and disc, can be displayed on the TV
screen.

• Screensaver function

• 3D sound (3D sound effect using 2
speakers)

• High bit / high sampling with 27MHz / 10bit
video encoder

This unit has 27MHz / 10bit capability, that
enables the faithful reproduction of fine
images.

• High bit / high sampling with 96KHz / 24bit
audio D/A converter

With this 96KHz / 24bit linear Pulse Code
Modulated signals, which constitute the
highest specifications in the DVD standards,
you can enjoy faithfully reproduced sound in
all of its various modes. To support 96KHz
sampling / 24bit sound, the shaping noise of
this multi-level digital sigma type of D/A
converter is kept flat up to 44KHz, thus
preventing the important audio signals from
being affected.

• Analog audio 2-channels output for
DOWNMIX (x1)

• Composite video out (x1)

• Slow Forward / Reverse (DVD) playback

• Fast Forward / Reverse playback

• Search of title, chapter, and time in DVD
disc, and search of track and time in VCD

and CD

• Various TV aspect (DVD)

4:3 for Pan and Scan, 4:3 for Letter Box, and
16:9 for Wide

• Repeat playback (title and chapter for DVD,
track and disc for VCD/CD)

• Repeat a defined period from A to B

• Selective Play (DVD/VCD/CD)

You can select and play the desired title / chapter
of DVD and track of Video CD/CD in STOP
mode.

• Various OSD (On Screen Display) languages
function (DVD)

You can select and display OSD among various
languages.

• Parental Lock function (DVD)

This function can prevent playback of software
that may be unsuitable for children.

• Multi Audio function (DVD)

The audio soundtrack can be heard in up to 8
languages. In the case of SVCD or CVD, it
depends on the disc. (The number of audio
languages depends on the software.)

• Multi Subtitle function (DVD)

The subtitle can be seen in up to 32 languages.
In the case of SVCD or CVD, it depends on the
disc. (The number of subtitle languages depends
on the software.)

• Multi Angle function (DVD)

This function allows you to choose the viewing
angle of scenes which were shot from a number
of different angles. (The number of angles
depends on the software.)

• Screen zoom function (DVD/VCD)

Basic Playback

N O T E

1

Press [ ] button to power on.

2

Press the [OPEN/CLOSE] button to open disc tray.

Place a disc accurately within the disc tray, ensuring that the label is facing upwards.

3

Insert the disc and press [OPEN/CLOSE] button to close the tray.

The disc tray is closed and after checking the disc’s condition, Playback or Stop
function starts to operate.

4

To playback, press [PLAY] button.

• In the case of DVD,

menus and titles are displayed on the TV screen.

• In the case of S-VCD and VCD2.0

the menus are displayed on the TV screen and the unit goes into PBC ( Play
Back Control ) Mode.

• In the case of CD, VCD1.1 and MP3,

the disc plays in order of its track numbers.

5

To stop, press [ ] button.

For pause, press [PAUSE] button in playback mode.
If you press [PLAY] button, it starts playback again.

Various Playback Methods

•

If you want fast (or fast reverse) playback,

press [ ] or [ ] button in Playback mode. You can watch fast (or fast
reverse) playing screen.
* This reverse playback can be unavailable for certain DVD. Unavailable for

MP3.

* The real playback speed may not coincide with displayed speed.

•

If you want slow playback,

press [ ] or [ ] button in PAUSE mode. You can watch the desired
screen in the slow forward or slow backward playback.
* The real playback speed may not coincide with displayed speed.

•

If you want still picture,

press [PAUSE] button in Playback mode.
You can watch the desired screen in Pause status.

Playing the DVD Video Disc

23

If no button is
pressed within 5
minutes after the
opening of the tray,
it will automatically
close in order to
prevent damage

Playing a desired scene

24

To skip scenes in a disc

1

To move to next chapter (or track), press

[NEXT ]

button.

The current chapter (or track) moves to the next chapter (or track).

2

Press

[PREV ]

button.

The current scene moves to the previous chapter (or track) or first scene of current
chapter (or track).

Directly moving to a desired title

Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on
it, the [TITLE] button can be used to select the movie title. Details of operation may differ
depending on the disc used.

Selecting a title may not be available on certain DVD discs.

1
2

Press the [TITLE/PBC] or [DVD/MENU]
button.

A list of the titles on the disc is displayed.
For the case of VCD disc, menu screen will
appear only when the disc has PBC function
and PBC ON is activated.

Press the [ENTER] button or
[PLAY/PAUSE] button after pressing
the [

,,,

] button to select the

desired title.

The selected title now starts playing.

Playing a Programmed order

25

Playing a desired scene

1
2

While STOP or Playback, press
[PROGRAM] button.

While the right figure is appearing, please input
desired Title(T) and Chapter(C) number with
NUMBER buttons.

* In case of VCD and CD, please input TRACK Number.

After completing setting, press [PROGRAM] or [PLAY] button.

Then, titles and chapters (track) are played in the above-programmed order.

* To exit from program mode, press

[ ] or [OPEN/CLOSE]

button.

TITLECHAP. SEL.

00 000 1-54

TITLECHAP. TITLE CHAP.
01 - - - - - 06 - - - - ­02 - - - - - 07 - - - - ­03 - - - - - 08 - - - - ­04 - - - - - 09 - - - - ­05 - - - - - 10 - - - - -

PROGRAM

PRG PLAY : PLAY SELECT : ENTER EXIT : PRG

PROGRAM

To cancel, move the cursor to the

desired parts and press [CLEAR] button.

Repeating a defined period

Each time you press [REPEAT} button in playback mode, repeat
playback starts as below.

CHAPTER

TITLE

OFF

TRACK

DISC

OFF

TRACK

DISC

RANDOM

OFF

TRACK

FOLDER

RANDOM

OFF

- DVD - - VCD - - CD - - MP3 -

• CHAPTER : Current chapter will repeatedly playback.

• TITLE : Current title will repeatedly playback.

• TRACK : Current track will repeatedly playback.

• DISC : Current disc will repeatedly playback.

• RANDOM : Tracks in the disc will playback in random order.

• FOLDER : Current folder will repeatedly playback.

• OFF : Repeat playback will be cancelled.

1

26

Playing a desired scene

At the point where you want to start the repeat
playback, press [A - B] button.

The right figure appears and repeat playback start position
(A) is set.

1

Repeating a defined period from A to B

A -

You may repeat a defined period from A to B

At the point where you want to end the repeat
playback, press [A - B] button again.

The repeat playback end position (B) is set and a defined
period from A to B is playback repeatedly.

2

A - B

To exit from repeat playback mode, press [A - B]
button.

It enters into Normal playback mode.

3

OFF

If you want to search for a title number,press
[SEARCH] button one time.

It shows current and total title numbers. Please enter the
new title number to be searched using the [NUMBER]
buttons.

1

Searching DVD with a title number, a chapter number or a time

001/003

T

Current title

total title

If you want to search for a chapter number,
press [SEARCH] button twice.

It shows current and total chapter numbers. Please enter
the new chapter number to be searched using the
[NUMBER] buttons.

2

001/023

C

Current chapter

total chapter

If you want to search for a particular time,
press [SEARCH] button three times.

Please enter the new time to be searched using the
[NUMBER] buttons.

3

01:03:20

total time

In order to complete the search process, press
[ENTER] button.

PLAY starts from the selected position.

4

Searching VCD, CD and MP3 with a track or track time

27

Playing a desired scene

If you want to search for a particular track,
press [SEARCH] button once.

In the case of PBC OFF, a screen as shown to the right
will appear showing the current and total track
numbers. Please enter the required track number using
the number buttons on the remote control.

* If PBC is on, entering the track number will default the unit’s

PBC to off.

1

001/013

T

Current track

total tack

If you want to search for a particular track
time, press [SEARCH] button twice.

In the case of PBC OFF, a screen as shown to the right
will appear showing the total time: please enter the
required time using the number buttons on the unit’s
remote control.

2

01:03:20

total time

On completion of either search process,
please press [ENTER].

PLAY starts from the selected position.

3

28

Confirming the current PLAY mode on screen

Confirming the current DVD disc mode

1

During play, press [DISPLAY] button.

This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the
up/ down cursors and choose the new setting using either the [ ] or [ ]
button or the numeric buttons on the remote control. On completion, press
[ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button.

Confirming the current SVCD disc mode

1

During play, press [DISPLAY] button.

This will display the current disc mode.

If you want to change any of the modes displayed, select the item using the up/ down

cursors and choose the new setting using either the

[ ] or [ ]

button or the numeric
buttons on the remote control. On completion, press [ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button.

T

C

DISPLAY

DISPLAY

001/003

001/023
00:01:03
1/3 ENG
1/3 ENG
OFF
1/4

current title / total title number
current chapter / total chapter number
time elapsed
current subtitle / total subtitle number / subtitle selected
current audio language / total audio language number / audio language selected
repeat playback mode
current angle / total angle number

T

C

DISPLAY

DISPLAY

001/003

00:10:54
OFF
OFF
1/3

current track / total track number
time elapsed

repeat playback mode
PBC mode

current audio language / total audio language number

29

Confirming the current CD, MP3, JPEG disc mode

1

During play, press [DISPLAY] button.

This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the
up/ down cursors and choose the new setting using either the [ ] or [ ]
button or the numeric buttons on the remote control. On completion, press
[ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button

Confirming the current VCD disc mode

1

During play, press [DISPLAY] button.

This will display the current disc mode.
If you want to change any of the modes displayed, select the item using the up/
down cursors and choose the new setting using either the

[ ] or [ ]

button or
the numeric buttons on the remote control. On completion, press [ENTER] button.
Exit from this Display mode by pressing the [DISPLAY] button

Confirming the current PLAY mode on screen

T

C

DISPLAY

DISPLAY

001/005

00:07:13
OFF
OFF

current track / total track number
time elapsed
repeat playback mode

PBC mode

T

C

DISPLAY

DISPLAY

001/005

00:07:13
OFF

current track / total track number
time elapsed
repeat playback mode

30

Selecting an audio language

1

1

Keep pressing

[]

button until the user’s preferred

language appears in playback mode.

If that particular DVD disc includes this audio information, the user can press
[ ] button to scroll through the available languages.

Keep pressing the [ ] button until the user’s preferred
subtitle language appears in the playback mode.

If that particular DVD disc includes this subtitle information, each time the
user presses the [ ] button the available subtitles will appear in rotation,
OFF will also be an option in this rotation.

1

If you want to adjust Sound Fields, press [3D] button.

Every time the user presses [3D] button, a 3D sound changes 3D ON --->

3D OFF ---> 3D ON .... in rotation.

AUDIO language, SUBTITLE language and 3D AUDIO

The user may select the audio track or the subtitle language if the disc supports this multi-language function.

A certain disc may

not support audio select.

Selecting a subtitle language

A certain disc may
not support subtitle
select.

Selecting 3D Audio

Sound Fields can be set.

total audio language

current audio language

01/03 ENG

AUDIO : DOLBYD

current audio type

current subtitle language

subtitle language selected

01/03 ENG

total subtitle language

audio language selected

3D ON

3D OFF

31

Using a zoom function

1

1

Keep pressing [ZOOM] button until the preferred zoom
appears.

Every time the user presses [ZOOM] button, the magnification changes : 2
times (X2) ---> 4 times (X4) ---> OFF ---> 2 times (X2) ---> ... in rotation.
The center of the screen is taken as the base point for the enlargement. It is
impossible to change this point using the

[

,,,

]

button on the remote

control.

Keep pressing [ ] button until the preferred angle
appears.

Every time the user presses [ ] button, the angle changes in a
consecutive order.

ZOOM and Multi Angle

The user can enlarge the current screen by either 2 or 4 times.

• For the case of SVCD

and VCD, only 2 times
Zoom is available.

• During 4 times zoom,

the subtitle facility is
not available.

Multi Angle

If a disc includes multi angle information, the user can watch a screen using a variety of angles. The function is
limited to a DVD disc supporting multi angle information.

X 2 _ _ _ _ _
_

_
_
_
_

X 4 _ _ _ _ _
_

_
_
_
_

current screen angle

01/03

total screen
angle

Select your disc type.

Move the cursor to FILTER by pressing [ ,
, , ] button. Keep pressing
[ENTER] button until the user’s preferred disc
type. Each time the user presses [ENTER]
button, disc type changes MIXED ---> MP3
ONLY ---> JPG ONLY ---> MP3 AND JPG --->
MIXED ---> ... in rotation.

Playing a disc containing MP3, JPEG files

1
2

The figure such as
that displayed on the
right should appear.

3

DISC:

..

DIR--01
DIR--02
DIR--03

FILTER MP3 ONLY
REPEAT TRACK

00:00 / 00:00

ENTER MENU

Select the folder.

Move the cursor to desired folder by pressing
[ , , , ] button and press [ENTER]
button to confirm.

5

DISC:

..

DIR--01
DIR--02
DIR--03

FILTER MP3 ONLY
REPEAT TRACK

00:00 / 00:00

ENTER MENU

Select the repeat playback mode.

Move the cursor to REPEAT by pressing [
, , , ] button. Keep pressing
[ENTER] button until the user’s preferred
repeat playback mode becomes available.
Each time the user presses [ENTER] button, the
repeat playback mode changes TRACK --->
FOLDER ---> RANDOM OFF ---> ... in
rotation.

4

DISC:

..

DIR--01
DIR--02
DIR--03

FILTER MP3 ONLY
REPEAT TRACK

00:00 / 00:00

ENTER MENU

32

About MP3 and JPEG discs

This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs.

Turn on your television and select the channel assigned to this
DVD player.
Press the DVD [OPEN/CLOSE] button, to open the disc tray.

Place the disc containing MPS, JPEG files on the disc tray with the label facing upwards.

Press the DVD open [OPEN/CLOSE] button, to close the disc tray.

The unit will take a short time to load the disc and display the directory structure.

DISC:

FILTER MP3 ONLY
REPEAT TRACK

00:00 / 00:00

ENTER MENU

..

DIR--01
DIR--02
DIR--03

Name of current directory

Location of current cursor

Current disc type selected
Current repeat mode
selected

33

Confirming the current PLAY mode on screen

Select the file to listen to (or view).

Move the cursor to the desired file which you want
to listen to (or view) by pressing [ , , , ]
button and press [ENTER] button to confirm. The
selected filed will play back.

* To exit the directory screen press [MENU] button

in playback or stop mode. Press [MENU] button to
make it reappear.

6

DISC: \DIR--01

..

FILEOPEN--01
FILEOPEN--02
FILEOPEN--03

FILTER MP3 ONLY
REPEAT TRACK

00:00 / 00:00

ENTER MENU

Play and Pause

Press the [PLAY/PAUSE] button toggle between those functions.

Search for a track

The [SEARCH] button works on MP3/JPEG discs as well as VCD/CD audio.
* If the [SEARCH] button is pressed in playback mode the folder tree view will disappear to be replaced by the

search bar.

To stop playback

Press the [STOP ] button.

To skip to the next or previous file

• Press the [NEXT ] button of the remote control briefly while playing, to skip ahead to the beginning of the
next file. Each time you press the button consecutively, the beginning of the next file is located and played back.

• Press the [ PREV (Previous)] button of the remote control briefly while playing, to skip back to the beginning of
the previous file. Each time you press the button consecutively, the beginning of the previous file is located and
played back.

The ability of this unit to read MP3 discs is dependent on the following:

• The Bit Rate must in the range of 64-256 kpbs.

• The maximum number of directories should not exceed 32.

• The maximum depth level of directories should not exceed 4.

• In case of the file that is recorded with the variable bit rate (VBR) in one file (Example : 54~256kbps) occurrence of the sound
breaking may happen during the playback.

• File names should be named using 8 or fewer letters and/or numbers, and must incorporate the “MP3” file extension.
EXAMPLE: ******** . MP3 where each * is a letter or number.

• Use only letters and/ or numbers in file names. If you use special characters, the file and/ or folder names may not be
displayed correctly on the on-screen display.

The ability of this unit to read JPEG discs is dependent on the following:

• If you press [PLAY] button instead of [ENTER] in JPEG image, slide show will begin at the current image.

• To stop slide show, press [STOP] button. By pressing [STOP] and [PLAY] button, you can start slide show from the first JPEG
image.

Cautions

• Don’t use the CD-RW (Rewritable) disc if possible because it can not be played back.

• The CD-R must be recorded with the standard format because it can not be played back according to the recording format.

• The CD-R should be written using the ‘disc at once’ method.

• The disc which is made using the IS0 9660 format can be Played back.

To display menus in a disc

If a disc includes menus, the user may use them.

34

Displaying menus in a disc

1
2

Move the cursor to the particular item by using the [ , , , ] buttons on the
remote control, selecting one using either [ENTER] or [PLAY] button.

Press [TITLE/PBC] or [DVD/MENU] button.

• This will show the available menus held on the disc, which will differ between formats.
(“Return” will appear on the OSD with VCD2.0)

• If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button.
* CD and VCD1.1 do not support the function.

35

Language setup

1
2

Press [SETUP] button when the DVD player
is either in the STOP or the Resume STOP
mode.

3

Selecting AUDIO LANGUAGE.

The preferred audio language maybe set if the audio language is set and
recorded in the DISC.
Every time the user presses [ENTER] button, the available AUDIO changes in
rotation.

4

Selecting SUBTITLE LANGUAGE.

The preferred language for the subtitles may be set within this menu.
When a subtitle language is set and recorded in the DISC, it is automatically
played in the set language every time it is played.
Every time the user presses [ENTER] button, the SUBTITLE language options
are scrolled through changes in rotation.

5

Selecting DISC MENU LANGUAGE.

Please set it as the preferred DISC MENU language. In case the DISC MENU
language is set and recorded in the DISC, it is automatically played in the set
language every it is playing. For example, English is set and recorded as a
DISC MENU language in the DISC, it is played in English.
Every time the user presses [ENTER] button, the DISC MENU language will
change, rotating through the various options.

OSD LANGUAGE

ENGLISH

ENGLISH

AUDIO ENGLISH
SUBTITLE ENGLISH
DISC MENU ENGLISH

LANGUAGE

VIDEO AUDIO

OTHERS

MOVE : SELECT:ENTER EXIT:SETUP

Selecting a OSD LANGUAGE.

Please select a language to be displayed on the
DVD screen.
Each time the user presses [ENTER] button, the
available OSD LANGUAGE changes in rotation.

If a disc does not
include this language
setting information, this
function will not be
available.

The user can set the language of menus in a disc, audio and subtitle.

Video setup

1
2

Press [SETUP] button when the DVD
player is either in the STOP or the
Resume STOP mode.

Selecting TV ASPECT.

Every time the user presses [ENTER] button, TV ASPECT changes 4:3 LB

--->

16:9 WIDE

--->

4:3 PS

--->

... in rotation. If a user selects “4:3”, the user can watch the original
scene in “16:9”, but with black bars at the top and bottom of the screen. If a user
selects “4:3 PS”, the user can only watch a selection of the original “16:9” screen. If
the disc’s TV aspect is originally recorded in 4:3, the user will not be able to watch it in
a widescreen format even though the “16:9 WIDE” option has been selected.

Audio setup

1
2

Press [SETUP] button when the DVD player
is either in the STOP or the Resume STOP
mode.

Selecting DIGITAL OUT.

Every time the user presses [ENTER] button,
DIGITAL OUT changes BITSTREAM ---> LPCM ---> BITSTREAM ---> ... in
rotation. Set output conditions to coaxial or optical terminal. You can set
following two values of digital output;

• BITSTREAM : the same format as that recorded on the DVD.

• LPCM : the decoded audio signal.

This option(Digital out) is not available for DDT-14H9ZZF

3

Selecting DYNAMIC RANGE.

Every time the user presses [ENTER] button, DYNAMIC RANGE changes
OFF ---> FULL ---> OFF ---> ... in rotation.

• Set “OFF” to hear a program in the full dynamic range as recorded disc.

• If you hear loud sound softer and soft sound louder, set “FULL”.

(In order to compress the dynamic range of the soundtrack set to FULL.)

DIGITAL OUT

BITSTREAM

BITSTREAM

DYNAMIC RANGE OFF

LANGUAGE

VIDEO AUDIO

OTHERS

MOVE : SELECT:ENTER EXIT:SETUP

36

A user may select audio menu according to a user’s speaker set.

A user can set up a connected TV condition and screen.

LANGUAGE

TV ASPECT

VIDEO AUDIO

4:3 PS

4:3 PS

OTHERS

MOVE : SELECT:ENTER EXIT:SETUP

1
2

Press [SETUP] button when the DVD
player is either in the STOP or the
Resume STOP mode.

Selecting OSD.

Select “ON” to allow OSD (On Screen
Display) to be displayed on the TV.

OSD

ON

ON

SCREEN SAVER ON
DEFAULTS RESET
PARENTAL 8 ADULT

LANGUAGE

VIDEO AUDIO

OTHERS

MOVE : SELECT:ENTER EXIT:SETUP

3

Selecting SCREEN SAVER.

If bright scenes continue to be displayed on the screen, the TV can become
damaged. If the screensaver option is set to “ON”, the screensaver functions
automatically and the DVD logo will move continuously if the Resume stop,
Stop or Open status is maintained for more than 5 minutes.

4
5

OSD

ON

ON
SCREEN SAVER ON
DEFAULTS RESET

CHANGE PASSWORD _ _ _ _

LANGUAGE

VIDEO AUDIO

OTHERS

MOVE : SELECT:ENTER EXIT:SETUP

6

Changing a password.

To change the user’s password, please move cursor to “CHANGE PASSWORD” and
enter new password.

OSD

ON

ON
SCREEN SAVER ON
DEFAULTS RESET

CHANGE PASSWORD _ _ _ _

LANGUAGE

VIDEO AUDIO

OTHERS

MOVE : SELECT:ENTER EXIT:SETUP

PARENTAL 8 ADULT

37

• If password is wrong,
“WRONG
PASSWORD” appears
instead of “CHANGE
PASSWORD”.

• The default password
is “3308” : you may
enter this password if
your chosen one has
been lost or forgotten.

Others Setup

Changing DEFAULTS.

If you press [ENTER] button, “RESET” changes to “LOADING” for 2 seconds.
Then it changes again to “RESET”.
This operation will reset every function to the original factory defaults, with
the exception of the Parental settings.

Selecting PARENTAL.

Press [ENTER] button when the cursor is located in
PARENTAL.
When “INPUT PASSWORD” appears on the screen,
input the password.

Change the level of Parental Control.

With right password, you can change the PARENTAL
by pressing [ENTER] button. Every time the user
presses [ENTER] button, Parental changes 1KIDS 2G
3PG 4PG-13 5PG-R 6R 7NC-17 8ADULT in rotation.
These 8 levels of parental control are provided to
prevent children from viewing scenes of a violent or
sexual nature. The level of parental control can be
incremented to a suitable level.

39

Terms related with DVD

DVD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135

minutes of video information. And for audio, it can hold up to 8 kinds of languages and 32
kinds of subtitle languages. By using MPEG-2 video compression and digital 3D surround
sound, DVD realizes high definition images and quality sound similar to that found in a
movie theatre.

CDDA A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
MP3 Audio compression format that enables audio files to be stored and transferred on a

computer with a relatively small file size. It enables you to enjoy CD quality music. (Short for
MPEG-1 Layer 3)

PBC This is recorded on a Video CD 2.0, Video CD 3.0, SVCD and CVD. The scenes or

information to be viewed (or listened to) can be selected interactively with the TV monitor by
looking at the menu shown on the TV monitor. It stands for PlayBack Control.

CHAPTER This relates to the information recorded onto a DVD. A title in a DVD may be divided into

many tracks and these tracks are called chapter. A certain scene contained on the disc can
be quickly searched with this chapter number.

TITLE This relates to the information recorded onto a DVD. A DVD can be divided into many titles.
TRACK This relates to the information recorded onto a video CD and audio CD. A disc may consist

of many tracks which will allow a user to search to a certain position.

dts Digital Theatre System is a 5.1 -channel surround sound system, which is widely used in

movie theatres around the world. It enables the bit rate to be increased to provide good
sound quality. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Multi Angle Some DVD discs contain the various scenes that have been simultaneously shot from a

number of different angles.

PCM PCM (Pulse Code Modulation) means digital sound.
Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32

kbps to 640 kbps, thus offering flexibility and economical performance as well as
uncompromised sound quality.

Bitstream Digital audio data that is decoded into an analogue signal for subsequent output to

speakers.

Lt/Rt It indicates L/R of Dolby Digital 2CH Downmix Output.
Downmix Downmix is the technology for playing proper audio in case the recorded audio channel

construction and that of output channel does not match each other. Downmix will provide

5.1 channel-audio by using 2 stereo speakers.

About DVD

40

Discs

The safe keeping of discs

• To keep a disc in clean condition, please do not touch the side containing play information.

• Do not attach a bit of paper or sticky tape on it.

• Do not expose a disc to a direct sunlight or electric
heating systems.

• After using it, please keep the disc in a case.

Cleaning a disc

• Please rub gently, from the center outwards, with clean cloth.

• Do not use thinner, benzol (benzene), commercial cleaning goods
or antistatic sprays.

Macrovision

This product incorporates copyright protection technology that is protected by method claims of certain U.S
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.

About DVD

Region Code

This product and all DVD’s have
region codes allocated to them. If
both codes do not match the disc can
not be played. A map showing the
codes allocated to each region, is
given to the side.

Before suspecting fauls with the DVD

Symptom

• The recorder does not play.

• No sound comes through.

• A disc is playing but screen does
not appear or poor screen appears.

• The DVD Sound is irregular

• “AUDIO” or “SUBTITLE” button does
not work.

• “ANGLE” button does not work
while a DVD is playing.

Checks

If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region 2 or All.
Please check whether a DVD is inserted in a right directing.
This unit does not support CD-ROM or DVD-ROM playback.

Play mode may be “SLOW” or “PAUSE/STEP”(In abnormal
speed play, no sound comes through)
Did you connect the parts in right way?
Please check the operative condition of TV or amplifier.
From “DEFAULT” SET, please check “Audio” items.

Did you turn on your TV sets?
Did you connect the parts in right way?
The play may be in “PAUSE”.
The disc may be contaminated or damaged.

Please check the connection with Dolby Digital amplifier.
Please check the plugs are connected with one another tightly.
The connection terminals may be contaminated.

If a DVD does not include language information, it does not
support the function.

”ANGLE” is supported only in a DVD contains multi angle
scenes. Also a user can confirm the support with the “ANGLE”
mark on screen.

• “MENU” does not appear while a
DVD is playing.

• Screen shakes or appears only in
black and white. (or Subtitle
shakes)

• The file name of MP3 (CD-R)
appears with strange letters.

• Any MP3 (CD-R) file isn’t displayed.

Please check the degree of remote control, distance or any
interruption.
Please check a battery in remote control whether it is exhausted
or not.
A DVD may not contain menu information.

The recorder may not coincide with your TV system. Please
press [SYSTEM] to match to PAL system.
A disc may have some contaminants or be damaged.
Please check a DVD’s region code 5.
To watch the disc whose region code is ALL and its system is
NTSC, select “PAL” in TV Type.

The file name of MP3 recognize only the Alphabet (A-Z, a~z),
numbers (0-9) and a special symbol on keyboard (~, !, @, #, $
...) and 10 letters can be displayed in maximum.
The letters except above case will be displayed like “----”.

If the surface of disk is injured, the file display and playback
may be impossible.

41

Correction

• Colour is not displayed and net
pattern is displayed on the specific
channel.

• Vertical and horizontal line and net
pattern are displayed on the
screen in a moment.
Vibration is also displayed.

• Pictures are overlapped and white
and black spots are displayed

•

The original colours are not displayed
in a screen in specific areas.

• Picture is displayed irregularly.

• No picture and sound

• No sound

• The remote control does not work
properly

• The playback picture is poor

• The DVD player does not start
playback

Check the external antenna and cable TV conditions.
Check whether you select the correct channel.

Check the interference wave caused by car, neon sign, and
high frequency.
C

heck the strong interference radio wave from wave of
other devices or radio station. Please stop the use of mobile
phone, hair dryer, and electric drill.

C

heck damage of antenna or connection of antenna cable.
C

heck the height and direction of antenna. If it is incorrect,
please adjust the antenna.

R

emove from magnetic fields or rotate set until purity error

disappears.

C

heck the connection of antenna cable (incorrect connection
or disconnection).
M

ove this product to another location.

P

lug the power cord into the wall outlet securely.

P

ress the [TV/AV/DVD] button to change input mode.

[ ]

button may be pressed.

C

heck the volume.

C

heck a stoppage of power supply
C

heck whether the power cord is plugged into the wall
outlet.
T

he batteries in remote control may be exhausted or loaded
in wrong polarity.
C

heck whether the remote control is too far from the player

and is not pointed at the remote sensor of the player.

C

heck the contamination of a disc and clean the disc.

I

nsert a disc.

I

nsert a playable disc. Check the disc type, colour system
and Region code.
P

lace the disc with the playback side down.

P

lace the disc on the disc tray correctly inside the guide.

C

heck the contamination of a disc and clean the disc.

P

ress the [DVD MENU] button to turn off the menu screen.

C

ancel the Rating function or change the rating level.

Symptoms

Before Calling Service Personnel

42

Specifications

Model

VHF-L
VHF-H
UHF

Input band
and system

TV-STANDARD

SPEAKER RMS OUTPUT
(60% mod.)
POWER SUPPLY
POWER CONSUMPTION
ST-BY POWER
UNIT SIZE(W x H x D):
CARTON SIZE(W x H x D):
GROSS WEIGHT (KG):
AUDIO OUTPUT

DTD-14H9

E2~S7/E2~S8(EXCEPT UK)

S8~S36/S9~S38(EXCEPT UK)

S37~E69/S39~E69
UK MODEL : PAL-I/II
CONTINENTAL : PAL, SECAM-BG/DK
FRANCE MODEL : PAL, SECAM-BG/DK SECAM-L/L

1.5W + 1.5W (FM 60% Mod.)

220 ~ 240VAC 50Hz

66W

under about 3W

388 x 374 x 381
446 x 467 x 458

11.6kg
L/R

43

INPUT

OUTPUT

AV : 21 PIN SCART (FULL SCART)

21 PIN SCART(FULL SCART) HEADPHONE