Daewoo DTC-29M5, DTC-25M5T, DTC-29M5T, DTC-25M5TP, DTC-29M5TP User's Guide

...

COLOR TELEVISION

INSTRUCTION MANUAL

48586907E202-R2

MODEL DTC-14D9/20D9/21D9/2131

DTC-14D9T/20D9T/21D9T/2131T DTC-14D9TP/20D9TP/21D9TP/2131TP DTC-2132/2132T/2132TP DTC-14K3ME/14K3MP/14K3MT/14K3MZ DTC-21K3ME/21K3MP/21K3MT/21K3MZ

MODEL DTC-25M5/29M5

DTC-25M5T/29M5T DTC-25M5TP/29M5TP DTC-25M5MT/29M5MT DTC-29M6/29M6T DTC-29U1/29U5 DTC-29U1T/29U5T DTC-29U1TP/29U5TP

Table of contents

Safeguards 2

INTRODUCTION

Features 3 Installation 3 Identification of controls 4 Remote control 4 Swicthing the set ON/OFF 5 Tuning the TV channels 6 Convenient picture control 8 Enjoying wide and zoom picture 9 Convenient sound control 10 Using other menus 11 Watching picture in picture (option) 15 Connecting the external equipment 17 Connecting with other equipment 18 Connecting DVD PLAYER/BS receiver 19 The Othello game

Teletext(option)

Specification 23

SAFEGUARDS

To operate your receiver at the peak performance, please read this Instruction Manual carefully and retain it for the future reference.

M Water and Moisture : Never install the set in the following places : in the bathroom, in a wet basement(Dripping or

splashing water).

No objects filled with liquids, such as vases, shall be placed on the apparatus.

M Heat : No naked flame sources, such as candles, should be placed on the apparatus. M Ventilation : The ventilation should not be impeded by covering the ventilation openings with items, such

as newspapers, table-clothes, curtains, etc. Accidental contact with high voltage components could result in electric shock. Never place the set in a confined space such as a bookcase or built-in cabinet, unless proper ventilation is provided. The set requires minimum distances around the apparatus for sufficient ventilation.

M Object Entry : Do not insert foreign objects, such as needles and coins, into the ventilation openings. M Lightning Striking : You should disconnect your set from the main and the aerial system during thunderstorms. M Cleaning : Unplug the set from the main before cleaning. Do not use liquid cleaners of aerosol cleaners. Use only a

lightly dampened soft cloth.

M Do not place liquids including flower vases and vessels filled with chemicals or water, etc. on the top of the unit.

Keep the inside of the unit free from foreign objects such as hairpin. If hazardous objects fall inside of the unit, unplug it immediately and call a qualified technician for removal.

M When you don’t use the set for an extended period during vacation or other occasions, always make sure of

switching off the MAIN POWER(ON/OFF) SWITCH of the TV set.

M Do not place this television equipment on an unstable cart, stand, or table.

The television equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Use only with a cart or stand recommend by the manufacture’s instructions, and should use a mounting kit approved by the manufacture.

M When replacement parts are required, be sure the service technician has used replacement parts specified by the

manufacture that have the same characteristics as the original parts. Unauthorized substitutions may result fire, electric shock, or other hazards.

M Upon completion of any service or repairs to the set, ask the service (as specified by the manufacture) to

determine that the set is in safe operating condition.

M If anything goes wrong, don’t try any fix it yourself, get a qualified service agent to look at it. M When Install the TV set, make the gap at least 10cm from the wall(at back, bottom, top and side of the TV set).

NOTE

If the receiver is moved or placed in a different direction, the MAIN POWER (ON/OFF) SWITCH must be switched off for at least 15 minutes in order to take out a colour strain on the screen.

Features

INTRODUCTION

Installation

WIDE / ZOOM Screen : You can select a desired WIDE(or ZOOM) screen mode for movies

as well as the most 4:3 picture mode. Selectable picture and selectable sound : Allows one-touch selection of your favorite picture

quality and tone quality.

Off-timer and On-timer: Turns off the TV automatically and will turn it back on at a preset time. Picture-In-Picture (Option) Digital-Eye (Option) Teletext(Option)

AFTER MOVING THE SET

If the used set is moved or placed in a different direction, the ON/OFF button must be switched off for at least 15minutes in order to take out a colour stain on the screen.

INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT

Press down the battery compartment grip and slide the cover. Insert the batteries supplied(two 1.5V, type AA).

Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Used batteries should be disposed of properly.

AERIAL CONNECTION

For better picture and sound quality, an effective aerial installation is the most important. If you are located in a relatively strong area, you will be able to use the indoor aerial. When using an outdoor aerial, it is usually connected to the set by means of 75 ohm coaxial cable.

MAINS CONNECTION

Plug the mains cable into the power socket with 100-250V AC, 50/60Hz.

INTRODUCTION

Identification of controls

SIDE

NORMAL

RECALL

MODE

SKIP

14 15

21 22

23 12

17 18 19

SLEEP

PinP

SWAP

POSITION

SIZE TV/VIDEO

CH.LOCK

DELETE

MOVE P.SIZE

Remote control

TV mode

ON/OFF PR (CURSOR) UP VOLUME UP (CURSOR RIGHT) RECALL NUMBER 0~9 NORMAL SIZE(PIP) TV/VIDEO(PIP) SOUND MODE SOUND SYSTEM CH.LOCK DELETE(Edit mode) MUTE VOLUME DOWN(CURSOR LEFT) PR(CURSOR) DOWN SLEEP AV SWAP(PIP) PinP ON/OFF(PIP) TV/TEXT SKIP(Edit mode) POSITION(PIP) MOVE(Edit mode) PICTURE SIZE

TELETEXT MODE

POWER PAGE UP SUB PAGE REVEAL NUMBER 0~9 INDEX CANCEL B Y HOLD PAGE DOWN SIZE MIX

TEXT R G

REAR

FRONT

SCART(OPTION)

29”

Others

29”

OUT

AV1

ANT

DVD IN

DVD-Y

VIDEO

AUDIO

(MONO)

A U D

ON/OFF

MAIN

POWER

BUTTON

VIDEO 2

INPUTRL(MONO)

HEAD

PHONE

STAND-BY

INDICATOR

REMOTE SENSOR

MENU BUTTON

VOLUME DOWN/UP BUTTONS

PROGRAMME

DOWN/UP BUTTONS

TV/VIDEO

VIDEO 2

AUDIO

L(MONO) R

ON/OFF

VIDEO 2

L(MONO)

AUDIO

SWITCHING THE SET ON AND OFF

Switching On

Switch the set on with the ON/OFF button in front of the receiver TV. The set will be turn on. If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the PR UP/DOWN button or one of the NUMBER button 0..9 on the remote controller. The STAND-BY INDICATOR turns “RED” to “OFF”, then picture will appear on the screen.

Switching Off

Press POWER button on the remote controller to return the set to its stand-by mode. The STAND-BY INDICATOR will illuminate. If you don't use the set for extended period of time, turn it off with MAIN POWER button in front of the receiver.

Auto-power-off

If broadcasting signal is not present for 30 minutes, the TV will automatically turn off after about 30 minutes. However, if the Off-time or Sleep time is operating, it takes precedence. This Auto-Power-Off function does not operate in the “AV1” or “AV2” or “DVD” mode.

AUTO SETUP SYSTEM

1.Press the MENU button to select INSTALL.

2.Press the y/x buttons and then select INSTALL.

3.Select AUTO SETUP with the PRy/x buttons. Press the right button and then select a sound system. Press the right button to start AUTO SETUP.

4.Please wait until the EDIT menu appears.

TUNING THE TV CHANNELS

AUTO SETUP SYSTEM

EDIT

1.Press the menu button to select INSTALL.

2.Press the y/x buttons and then INSTALL SYSTEM.

3. Select EDIT with the PR y/x buttons and press the C/B buttons to start EDIT.

4.DELETE PROGRAM POSITION DATA.

Position the blue-line to the program to delete with the PR y

buttons and the DELETE button.

5.CHANGING THE ORDER OF THE CHANNELS Position the blue-line to a program to move with the PR y/x buttons and the MOVE button. Press the PR y/x buttons to position the blue-line to another program to move.

By pressing the MOVE button again, selected two program will be moved.

6.ENTER A STATION NAME Locate the cursor to below NAME with the C/B buttons. Using the PR y/x buttons, select the desired letter, number or blank. Press the B(right button) to select the next position.

7.SKIPPING THE CHANNELS You can select SKIP with the SKIP button in EDIT mode or locate in the cursor to below SKIP with the C/B buttons and then press the PR y/x buttons to skip the desired program. A program marked with skip “ ” is skipped when changing channel using the program UP/DOWN(on normal operation). Press the NUMBER buttons 0~9 or the PR y/x buttons to select program number you want. The screen will change according to the selected program number.

8. SELECT SOUND SYSTEM When the sound is abnormal, press the MODE button on the remote controller. Select the correct sound system.

+ 16 hidden pages