Daewoo 710C Service Manual

Service Manual

XGA COLOR MONITOR
Model : 710C

DAEWOO ELECTRONICS CO., LTD
OVERSEAS SERVICE DEPT.

4

Electrostatically Sensitive (ES) Devices

Some semiconductor (solid state) devices can be damaged easily by static electricity.
Such components commonly are called Electrostatically Sensitive (ES) Devices.
The examples of typical ES devices are integrated circuits, some field-effect transistors and semiconductor “chip”
components. The following techniques should be used to help reduce the incidence of component damage
caused by static electricity.

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any
electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a
commercially available discharging wrist strap device which should be removed for potential shock reasons
prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface
such as aluminum foil to prevent electrostatic charge buildup or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static type solder removal device. Some solder removal devices not classified as “anti-static”
can generate enough electrical charges to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate enough electrical charges to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to
install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive
foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the
protective material to the chassis or circuit assembly into which the device will be installed.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmful motion such
as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate
enough static electricity to damage an ES devices).

General Soldering Guidelines

1. Use a grounded-tip, low-wattage soldering iron with appropriate tip size and shape that will maintain tip
temperature within a 550°F-660°F (288°C-316°C) range.

2. Use an appropriate gauge of RMA resin-core solder composed of 60 parts tin/40 parts lead.

3. Keep the soldering iron tip clean.

4. Thoroughly clean the surface to be soldered. Use a small wire-bristle (0.5 inch or 1.25cm) brush with a metal
handle. Do not use freon-propelled spray-on cleaners.

5. Use the following soldering technique:
a. Allow the soldering iron tip to reach normal temperature (550°F to 660°F or 288°C to 316°C)
b. Hold the soldering iron tip and solder strand against the component lead until the solder melts.
c. quickly move the soldering iron tip to the junction of the component lead and the printed circuit foil, and hold it
there only until the solder flows onto and around both the component lead and the foil.
d. Closely inspect the solder area and remove any excess or splashed solder with a small wire-bristle brush.

CAUTION: Be sure that no power is applied to the chassis or circuit, and observe all other safety

precautions.

CAUTION: Work quickly to avoid overheating the circuit board printed foil.

5

FIGURE 1. USE SOLDERING IRON TO PRY LEADS

IC Removal/Replacement

Some utilized chassis circuit boards have slotted (oblong) holes through which the IC leads are inserted and then
bent flat against the circuit foil. When holes are slotted, the following technique should be used to remove and
replace the IC. When working with boards using the familiar round hole, use the standard technique as outlined in
paragraphs 5 on the page under the title of general soldering guidelines.

Removal

1. Desolder and straighten each IC lead in one operation by gently prying up on the lead with the soldering iron tip
as the solder melts.

2. Draw away the melted solder with an anti-static suction-type solder removal device (or with desoldering braid
before removing the IC.

Replacement

1. Carefully insert the replacement IC in the circuit board.

2. Carefully bend each IC lead against the circuit foil pad and solder it.

3. Clean the soldered areas with a small wire-bristle brush. (lt is not necessary to reapply acrylic coating to the
area).

“Small-Signal” Discrete Transistor Removal/Replacement

1. Remove the defective transistor by clipping its leads as close as possible to the component body.

2. Bend the end of each of three leads remaining on the circuit board into a “U” shape.

3. Bend the replacement transistor leads into a “U” shape.

4. Connect the replacement transistor leads to the corresponding leads extending from the circuit board and crimp
the “U” with long nose pliers to insoure metal-to-metal contact, then solder each connection.

6

Power IC, Transistor or Devices Removal/Replacement

1. Heat and remove all solders from the device leads.

2. Remove the heatsink mounting screw (if applicable).

3. Carefully remove the device from the circuit board.

4. Insert new device in circuit board.

5. Solder each device lead, and clip off excess lead.

6. Replace heatsink.

Diode Removal/Replacement

1. Remove defective diode by clipping its leads as close as possible to diode body.

2. Bend the two remaining leads perpendicularly to the circuit board.

3. Observing diode polarity, wrap each lead out of the new diode around the corresponding lead on the circuit
board.

4. Securely crimp each connection and solder it.

5. Inspect the solder joints of the two “original” leads on the circuit board copper side. If they are not shiny, reheat
them and apply additional solder if necessary.

TECHNICAL INFORMATION

Picture T ube

Type : 17-inch, Flat Square T ube type
(16.2-inch, viewing area)
Dot Pitch : 0.26mm
Face Treatment : Non-glare / Anti-static

Video

Input Signal : R.G.B Analog
Amp. Bandwidth : 135 MHz
Input Sync : TTL, separate negative / positive

Scan Frequency

Horizontal : 30-86 KHz
Vertical : 50-160 Hz

Max. Resolution

1600 dots X 1200 lines (at 65Hz)

Power Source

Free Voltage (100-240 Vac, 50/60Hz)

Display Area

Standard Display Area : 310mm(H)X232mm(V)
Full Screen Size : 330mm(H)X250mm(V)

Power Consumption

Max. 120W

Dimension

424(W)X440(H)X447.2(D)mm
(set with stand)

Weight (Net/Gross)

18.7 / 21.7 kg

Operating Environment

Temperature : 10~40°C/50~104°F
Relative Humidity : 8~80%

Storage Environment

Temperature : -20~45°C/-4~1 13°F
Relative Humidity : 5~90%

State Recovery Time Power LED

On None Green

Stand-by

3 seconds

Green : 1 second

Suspend Amber : 0.5 second

Off 7 seconds Amber

7

GENERAL INFORMATION

This color monitor automatically scans all horizontal frequencies from 30KHz to 86KHz, and all vertical
frequencies from 50Hz to 160Hz. This color monitor adopted the OSD (On Screen Display), it shows the sync
polarity and frequency and it provides that easily adjust control. This color monitor supports IBM PC, PC/XT,
PC/AT, personal System/2 (PS/2), Apple Macintosh, and compatible users crisp text and vivid color graphics
display when using the following graphics adapters : (VGA, 8514/A, Super VGA, VESA and XGA and Apple
Macintosh Video Card). And so, this color monitor has a maximum horizontal resolution of 1280 dots and a
maximum vertical resolution of 1024 lines for superior clarity of display.

By accepting analog signal inputs which level is zero to 0.7 Volts. This color monitor can display and unlimited
palette of colors depending on the graphics adapter and software being used.

Abbreviations

ADJ Adjustment
AFC Automatic Frequency Control
CRT Cathode Ray Tube
Def Deflection
D.Y Deflection Yoke
FBT Flyback Transformer
H.SYNC Horizontal Synchronization
OSC Oscillator
P.S.U Power Supply Unit
PWA Printed Circuit Board Wiring Assembly
R.G.B Red, Green, Blue
V.Sync Vertical Synchronization

8

PIN CONNECTOR

CAUTIONS FOR ADJUSTMENT AND REP AIR

• Degaussing is always required when adjusting purity or convergence.

• The white balance adjustment has been done by a color analyzer in factory. The adjustment procedure,

described in the service manual is made by a visual check.

• Allow 20 minutes warm-up time for the display before checking or adjusting only electrical specification or

function.

• Reform the leadwire after any repair work.

Caution For Servicing

• In case of servicing or replacing CRT, high voltage sometimes remains in the anode of the CRT. Completely

discharge high voltage before servicing or replacing CRT to prevent a shock to the serviceman.

Arrangement of 15-pin D-sub connector

Pin Signal

1 Red
2 Green
3 Blue
4 GND
5 GND
6 GND - Red
7 GND - Green
8 GND - Blue

9 Reserved
10 GND - H.Sync
1 1 GND- V .Sync
12 Bi-directional Data (SDA)
13 Horizontal Sync
14 Vertical Sync (VCLK)
15 Data Clock (SCL)

1

610

15

9

OPERATION & ADJUSTMENT

ADJUSTMENT KEY

Launch OSD(On-Screen Display) menus

Select the next function

Increase the value of any selected function

Decrease the value of any selected function

10

ADJUSTMENT PROCESS

MENU

SELECT

MENU

MENU

MENU

MENU

SELECT

SELECT

SELECT

MENU

MENU

OSD OFF

CONTRAST

50%

BRIGHTNESS

50%

PINCUSHION

50%

TRAPEZOID

50%

COLOR TEMP.

K

9300 6550

RED GAIN

K

50%

STATUS

H : +31.5KHZ
V : +70.5 HZ

Z

Z

Z

TEST

TEST PATTERN

NO

Z

Z

Z

YES

MENU

MENU

R G B

R G B

R G B

R G B

R G B

R G B

R G B

R G B

When you choose the icon on the OSD window, you can exit the OSD screen.

11

OSD(On-Screen Display) Menu 1

Adjust the contrast of image, the difference between light and dark
areas on the screen.
Range : 0-100%

Adjust the brightness of the entire display.

Adjust the position of the display horizontally
(left or right).

Adjust the display width (horizontal size).

Adjust the position of the display vertically (up or down).

Adjust the display height (vertical size).

Adjust the display width & height at the same time.

Reset the screen to the Factory Preset Display Settings.

CONTRAST

50

50

BRIGHTNESS

H . POSITION

50

H . SIZE

50

V . POSITION

50

V . SIZE

50

50

IMAGE ZOO M

RECALL

NO

YES

12

OSD(On-Screen Display) Menu 2

Adjust the left and right margins for more convex or more concave
margins.

• Image turns to by .

• Image turns to by .

Adjust the trapezoid of the screen by moving the lines inward or outward.

• Image turns to by .

• Image turns to by .

Adjust parallelogram when the screen is leaning left or right.

• Image turns to by .

• Image turns to by .

Adjust the side balance when the sides of the screen are bowed towards
left or right.

• Image turns to by .

• Image turns to by .

Adjust the horizontal picture moire cancellation.

Adjust the vertical picture moire cancellation.

Adjust the focus image.

PINCUSHION

50

50

TRAPEZOID

50

50

PARALLELOGRAM

PIN BALANCE

50
50

ROTATION

H .

MOIRE

50

50

V .

MOIRE

FOCUS

50

Adjust the rotation when the screen is tilted left or right.

• Image turns to by .

• Image turns to by .

13

OSD(On-Screen Display) Menu 3

Choose different preset color temperatures or set your own customized
color parameters.

Adjust the red gain.

Adjust the green gain.

Adjust the blue gain.

Adjust the red bias.

Adjust the green bias.

Adjust the blue bias.

9300

6550

COLOR TEMP.

RED GAIN

50

50

GREEN GAIN

50

BLUE GAIN

RED BIAS

50

GREEN BIAS

50

BLUE BIAS

50

14

OSD(On-Screen Display) Menu 4

Self Diagnosis

Display horizontal & vertical frequency and polarity.

Display a RGB Color Bar to determine whether the screen color is
expressed normally or not.

YES : VESA DPMS operation.
NO : NO DPMS operation.

Select language for OSD.

No Signal screen is displayed when the D-Sub signal connector is not
connected or the status of the monitor is on DPMS mode.

Out of Range screen is displayed when the applied frequency is
under or over normal range.

Normal range
H : 30-86 KHz
V : 50-160 Hz

When the monitor doesn’t display, if you press any key , Self Diagnosis screen is displayed.
Self Diagnosis function checks if the status of the monitor is No Signal or Out of range.

Degauss the display and restore image quality.

Adjust the horizontal linearity.

Adjust the vertical linearity.

H 31

5KH

z

STATUS

V 70

5

H

z

TEST PATTERN

POWER SAVER

NO

YES

DEUTSCH

ENGL SH

ESPAÑOL
FRANCA S

TAL ANO

LANGUAGE

DEGAUSS

NO

YES

H . LINEARITY

50

V . LINEARITY

50

15

TROUBLESHOOTING HINTS

1. No Character

Are the

Contrast &

Brightness Controls

maximum?

Change the Contrast &
Brightness control to
maximum

No Raster

Refer to
No Raster

Check the peripheral circuit
of CRT Board

Check the video output
circuit and IC803 (pin 1, 3, 5)
and their ambient circuit

Trouble in 12Vdc line
of the Main PWB

Check the clamping pulse
circuit

Check the signal cable

No Character

Is whole

screen bright?

Yes

Yes

Yes

Yes

Yes

No

No

No

No

No

Yes

Yes

Rk, Gk, Bk

About 45Vpp

No

No

Is CRT

Cathode (Rk, Gk, Bk)

signal level

normal?

Is the

output signal of the

(pin 21, 24, 26) pre-amp

(IC801, KA2500)

normal?

Is clamping

pulse (pin 18 of IC801)

normal?

Is 12Vdc line

normal?

Is input signal

normal?

Trouble in IC801 and

its ambient circuit

16

2. No Raster

Trouble in
power supply
circuit

Trouble in power
supply circuit

Trouble in G1
line of Main PWB

Trouble in FBT

High Voltage
trouble in FBT

Trouble in 80

Vdc
line of power
supply unit

Refer to trouble
in P.S.U

Refer to trouble in
power supply unit.

Is CRT

heater red-hot?

No

No

No

No

No

No

NoYes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Is Heater

Voltage (CRT PWB)

about 6V?

Turn the Brightness

& Contrast control

fully Maximum

No Raster

Is whole

screen bright?

Check

G1 voltage about

-60V?

Is 80Vdc

line normal?

Does

turning the Brightness

control counterclockwise

make screen

bright?

Is CRT

G2 (screen) voltage

about 500V?

Trouble in
CRT

Trouble in FBT

17

3. A missing Color

Is input signal

normal?

One color is

missing

CRT

Cathode (Rk, Gk, Bk)

is normal?

Is video

output IC803 waveform

normal?

Each grid (G1, G2)

voltage normal?

Is the

output of pre-amp

(IC801, KA2500)
pin 21, 24, 26 all

normal?

Check video signal
cable or video card.

Trouble in IC801 or its
ambient circuit

Trouble in
video output
circuit, IC803
or ambient

Trouble in 80Vdc
line

Trouble in 80Vdc
line

Replace CRT

No

No

No No

No

Yes

Yes Yes

Yes

Yes

Rk, Gk, Bk

About 40Vpp

0.7Vpp

18

4. Abnormal OSD Font

Is menu

key selected?

Is OSD Font

exist?

* If menu key selected.

Is Heater

Voltage (CRT PWB)

about 6V?

Abnormal OSD Font

Is the
output of IC802
(pin 21, 22, 23)

normal?

Trouble in
Heater voltage
line.

Refer to trouble in P.S.U

Troubie in
IC802 or its
ambient circuit

Trouble in IC802
and its ambient
circuit

One color is
missing

Refer to Missing Color

No

No

Yes

Yes

Yes

Yes

No

19

5. Horizontal Output Circuit

Is the

drain waveform of

Q510 normal?

Is the H-out

waveform of IC501

normal?

Trouble in Step Down Circuit
(Check the Step Down of IC501,
Check Q510 and its ambient
circuit).

Trouble in IC501

Trouble in Horizontal

output circuit

Yes

No

Are the Collector

waveform of

Q503 and Q504

normal?

Yes

Yes

Yes

Trouble in Q508 and its
ambient circuit.

Trouble in Q503 and Q504

No

No

No

Trouble in Q509 and

its ambient circuit.

10V

0V

11V

0V

42V

Is the drain

waveform of

Q508 normal?

210V

20

6. Unstable Picture

6-1. Horizontal

Unstable

picture

Is H.Sync

input pin of IC501

correct?

Check H.Sync Out of
Micom or its ambient
circuits.

Is the

pin 4 of IC501

5V?

Check the value of
C505, R503

Yes

Yes

No

No

Trouble in IC501

21

6-2. V.OSC/Deflection Circuit

Unstable or

Abnormal picture

Is

± 12Vdc line

correct?

Trouble in
power supply unit

No

Yes

Is

the output

waveform of IC401

(pin 6) normal?

V.DY
failure

Trouble in V.Sync line

or IC501 failure.

Yes

No

45Vpp

Is the

output pulse

of IC501 (pin 23)

normal?

Trouble in IC401 or
its ambient circuit

Yes

No

22

7. Focus

Monitor remains

unfocused

Adjust finely

Focus VR in

FBT

Is

focus

acceptable?

Trouble in Focus

circuit (FBT)

Yes

OK

No

23

7-1. Dynamic Focus

Focus is poor

Is the

waveform of the

DF pin in FBT

correct?

NEC : 300V 120V
SAMSUNG : 300V 120V

1. Check the CRT socket
or connector wire

2. Trouble in FBT or CRT

1. Check the waveform of
the pin 1 of FBT.

2. Check D614

* Check after adjusting the static focus
finely by VR in FBT

DF

waveform

FVH

FVH FVV

FVV

No

Yes

Yes

Is the

waveform of

the pin 15 in IC501

correct?

Yes

No

1. Trouble in Q605, Q606,
Q607 and their ambient circuits.

2. Trouble in Q616, IC602
and their ambient circuits.

Trouble in IC501 or C513

No

DF

waveform

5V

2V
0V

0.8V

Is the

cathode voltage

of the D614

about 510V?

24

8. Convergence

Is

convergence

on the center area

bad?

Is

convergence on the

fringe area bad?

Adjust static
convergence

Refer to
Adjustment
procedure of
convergence

Yes

Adjust D.Y
Location

Yes

No

Poor convergence

25

9. Abnormal Picture

9-1. Horizontal Size

It isn't out of order.

Is the

H.Size

about 295mm

at VGA mode and

Min. H.Siz e

on OSD Menu?

No

Yes

1.Check B+ section of TDA9110
and its ambient circuit.

2.Check IC503 and its ambient
circuit.

Abnormal

H.Size

26

9-2. Vertical Size

Is

changeable the

DC voltage of

IC401 pin 1?

Check the IC401
and its
ambient circuit

Check the IC501 and
its ambient circuit

No

No

Trouble V.OSC/
Deflection Circuit

Refer to V.OSC/Deflection circuit

Yes

Is

changeable the DC

level of pin 23 of

the IC501?

Yes

Abnormal

V.Size

27

10. High V oltage Circuit

Trouble in Q602 or FBT

Is Q602

base waveform

normal?

Yes

Yes

Trouble in Q612, Q613
12V Line

Is Q601

collector waveform

normal?

Yes

No

Trouble in Q601

Is Q503

emitter waveform

normal?

Yes

No

Trouble in Q503, Q504

Is IC501

pin 26 waveform

normal?

Yes

No

Trouble in power supply

Is IC501

pin 29 voltage

about 12V?

No

No

Trouble in IC501
ambient circuit.

Is the

input H.Sync

correct?

Yes

Yes

No

Trouble in H.V circuit

(No Raster)

Trouble in H.Sync

Trouble in power
supply circuit

Is

B+(210V) line

voltage normal?

No

28

11. Side-Pincushion Circuit

Side-Pincusion distortion

is excessive or barrel

O.K

Select the

side-pincushion

icon on OSD menu,

and adjust acceptable

position.

Yes

Check Q501 or
its ambient circuit.

Is the pin 24

waveform of IC501

correct ?

Yes

No

Check IC501 or
its ambient circuit.

Trouble in H.V Sync

Is the

waveform of IC501

pin 1, 2

correct?

Yes

No

No

29

12. Power Supply Unit (P.S.U)

Is the

voltage of IC001

pin 4

more than

14.5V?

Replace DZ001, Q001,
Q002 and D003

No

Is

voltage of C101

210Vdc?

No

Is

voltage of C117

5Vdc?

No

Is

voltage of T001

pin 6 130V

(370V)?

Trouble in TH001, C014,
BD001, D003, D004,
D008

No

Is the

waveform of IC001

pin 3 correct?

400Vpp (620Vpp)

Trouble in D003, D004 etc

No

Trouble in P.S.U

Is

power switch

on?

Switch on

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Is

voltage of C120

80Vdc?

Trouble in D115, D112,
DZ114,Q104, Q107, Q105,
Video Part

No

Is

fuse F001

O.K?

Check the power cord outlet
and IC001, D004, BD001

No

A

30

Is voltage

of C124

8.7Vdc?

Trouble in D109 or CRT

No

Is voltage

of C115

12Vdc?

No

Yes

Yes

Yes

Is voltage

of C116

-12Vdc?

Trouble in D107, IC104
or vertical Part.

P.S.U O.K

Trouble in D105, D106,
IC102, IC103, IC701
or horizontal Part.

No

A

31

ALIGNMENT PROCEDURE

Standard Adjustment Conditions

1. Power source voltage : AC 120V , 60Hz./AC 220V, 50Hz

2. Aging : Take at least 20 minutes warm-up time.

3. Signals.
Video : Analog 0.7Vpp 75Ω terminal positive polarity

Synchronizing : TTL level Negative/Positive Separate/Composite
Deflection frequency

Horizontal Frequency : 30KHz - 86KHz
Vertical Frequency : 50Hz - 160Hz

Pre-Adjustment

1. High voltage Adjustment
Adjust 26 kvdc between Anode cap and ground at a cross hatch pattern of 79.9KHz by using VR604.

Main Adjustment

1. Setting the Controls
Set the value of items as following.
Contrast : Max. (OSD value up to 100)
Brightness : Center (Set the OSD value to 50)

2. H.size, V.size, H.phase, V .position, Pincushion, Trapezoid
Receive the cross hatch pattern of Factory preset mode.
H.Size, V.size, H.phase, V.position, Pincushion, Trapezoid are adjusted at each mode.
In Factory , Auto Alignment was done at each mode. Therefore, Factory preset mode has it’s own value
according to each control.

3. Focus
(a) Set brightness control to center and contrast control to MAX.
(b) Receive all “H” character pattern of 79.9KHz mode signal.
(c) Adjust the Focus control of FBT to obtain best Focus (static focus and Dynamic focus).

4. Geometric Distortion Adjustment.
(a) Receive the cross hatch pattern of VGA mode signal by using the signal generator.
(b) Pin balance, Parallelogram are adjusted the best geometric status.
(c) Repeat the adjustment at each mode.

5. White Balance Adjustment
(a) Receive a small box pattern of VGA mode.
(b) Select 9300°K on the OSD Menu.
(c) Set the bright control and contrast control to the maximum and receive the all black pattern.
(d)Select the R, G, B Bias on the OSD menu and adjust the ADJUST +/– key to get the color coordinates in

X=0.281, Y=0.31 1 and the screen luminosity to 1 Ft/L.
(e)Set the brightness control to the center and contrast control to the maximum.
(f) Receive a small box pattern.
(g)Select the R, G, B gain on the OSD menu and adjust the ADJUST +/– key to get the color coordinates in

X=0.281±0.03, Y=0.311±0.03
(h)Adjust the sub contrast control on the OSD menu to get the screen luminosity to 41~43 Ft/L in small box

pattern.
(i) Receive a full white pattern and adjust the VR605 to get the screen luminosity to 31~33Ft/L.
(j) Select 6550°K on the OSD menu and receive a small box pattern.

32

(k) Repeat (c),(d),(e),(f),(g).

Just a difference from 9300°K mode is color coordinates.
Set color coordinates in X=0.313, Y=0.329

6. Static Convergence Adjustment
(a) Apply an magenta cross hatch pattern on display.
(b) Adjust the focus from the best over all focus on the display.

Also adjust the brightness to the desired condition.
(c) Vertical red and blue lines are converged by varying the angle between the two tabs of the 4-pole magnets.
(d) Horizontal red and blue lines are converged by varying the tabs together, keeping the angle between them

constant.
(e) Apply a white cross hatch pattern on display.
(f) Vertical green and magenta lines are converged by varying the the angle between the two tabs of the 6-pole

magnets.
(g) Horizontal green and magenta lines are converged by varying the tabs together, keeping the angle between

them constant.

MAIN BLOCK DIAGRAM

VIDEO BLOCK DIAGRAM

EMI
FILTER

(03ME3D)

LINE
FILTER

(DLF-3060)

DEGAUSSING
CIRCUIT

DEGAUSS CONTROL

(OPTION)

PFC
CONTROL

(MC34262)

DPMS CONT.

SMPS
CONTROL

(STR-F6656)

SMPS
TRANSFORMER

MULTIPLE
OUTPUT
REGULATOR

+12,+12,-12

+5

VIDEO
POWER

80V

12V, 5V

15PIN
D-SUB

SCL

EPROM

(24LC08)

(OPTION)

USB

(OPTION)

USB

H.SYNC

V.SYNC

MCU

(MC68HC705BD32)

SYNC
TRANS

(DST-601)

SYNC.
TRIGGERING

MAIN
POWER

210V, 12V
24V, -12V
5V

SDA

HCS

SCL
SDA
V.SYNC

H.SYNC

R,G,B

H.DRV

H.DRV

H.SIZE
& G/D
CONTROL

X-RAY
PROTECT

HV.DRV

VIDEO
PREAMP

(KA2500)

OSD IC

LSC4523P2

CLAMP & BLANKING
PULSE

H.OSC
&
V.DRV

(TDA9110)

H.DY

VIDEO
OUTPUT
AMP

(LM2403)

AUTO
H.LIN
CONTROL

H. LIN
COIL

B+
CONTROL

(

PC1555C)

µ

H/V
CONTROL

(KA7500)

B+
BUCK L.

VIDEO
DC-BIAS
CIRCUIT

R,G,B BIAS

BRIGHT CONTROL

TILT

V.DRV
AMP
(KA2142)

BUCK
TRANS

H.CS
BLOCK

SCAN B+

H.SIZE FB

FBP

F/B

ABL
ADJUST

DF
FOCUS

DF

ADJUST

CRT

SCREEN &
FOCUS

HIGH VOLTAGE

G1
CONTROL

G1
MUTE

V.DY

FBT

POWER
TACT

LED

S/W

TACT S/W BUTTON

(4 BUTTON)

USB

(OPTION)

37

38

Fig &

Part No Description

Index

Capacitors
C102 CCXF1H104Z Ceramic 50V Z
C402 CCXB1H331K Ceramic 50V K
C105 CBSLH200J Ceramic 50V J

RESISTOR Description

Example:

CAP ACIT OR Description

Example:

Important Safety Notice

Components identified with the International Symbol have special characteristics important for safety.
When replacing any components, use only manufacturer’s specified parts.

Abbreviation of Description

Fig &

Part No Description

Index
R101

Resistors

RE-42820J Carbon: 82J

REPLACEMENT PARTS LIST

39

Allowance
F±1%
J±5%
K ±10%
M ± 20%
G±2%

Allowance
C ± 0.25pF
D ± 0.5%
F ± 1pF
J±5%
K ± 10%
P ± 100% ~ 0%
Z ± 80% ~ –

00001 9979800464 PCB MAIN T1.6*246*330
00001 9979800465 PCB CRT T1.6*136*105
B002 5PB13857— COIL BEAD BI3857(AXIAL)
B547 5PB13857— COIL BEAD BI3857(AXIAL)
B890 5PB13857— COIL BEAD BI3857(AXIAL)
B891 5PB13857— COIL BEAD BI3857(AXIAL)
B893 5PB13857— COIL BEAD BI3857(AXIAL)
B895 5PB13857— COIL BEAD BI3857(AXIAL)
B896 5PB13857— COIL BEAD BI3857(AXIAL)
B897 5PB13857— COIL BEAD BI3857(AXIAL)
B898 5PB13857— COIL BEAD BI3857(AXIAL)
B899 5PB13857— COIL BEAD BI3857(AXIAL)
C001 CCXB2H471K C CERA 500V B 470PF K (TAPPING)
C002 CBXB3A471K C CERA SEMI 1KV R 470PF K (T)
C003 CCXB1H472K C CERA 50V B 4700PF K (TAPPING)
C004 CEXF2C220V C ELECTRO 160V RSS 22MF (10X20) TP
C005 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP
C006 CCXB3A101K C CERA 1KV B 100PF K
C007 CCXB3D103P C CERA HIKB 2KV 0.01MF K
C008 CL1UC3104M C LINE ACROSS WORLD AC250V 0.1UF MR.47
C014 CEYP2G331Z C ELECTRO 400V SMH 330MF (30*45)
C018 CL1UC3104M C LINE ACROSS WORLD AC250V 0.1UF M R.47
C101 CEYF2E101V C ELECTRO RSS 250V 100MF (18X35.5)
C104 CEXF1V221V C ELECTRO 35V RSS 220MF (10X12.5)TP
C105 CEXF1V101V C ELECTRO 35V RSS 100MF (8X11.5) TP
C107 CEXF1E471V C ELECTRO 25V RSS 470MF (10X16) TP
C108 CEXF1E471V C ELECTRO 25V RSS 470MF (10X16) TP
C109 CEXF1E471V C ELECTRO 25V RSS 470MF (10X16) TP
C110 CEXF1V471V C ELECTRO 35V RSS 470MF (10X20) TP
C111 CCXB3A101K C CERA 1KV B 100PF K
C112 CXCH3A680K C CERA 1KV CH 68PF K (TAPPING)
C113 CXCH3A680K C CERA 1KV CH 68PF K (TAPPING)
C114 CEXF1C221V C ELECTRO 16V RSS 220MF (8X11.5) TP
C115 CEXF1C221V C ELECTRO 16V RSS 220MF (8X11.5) TP
C116 CEXF1C221V C ELECTRO 16V RSS 220MF (8X11.5) TP
C117 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP
C118 CEXF2C470V C ELECTRO 160V RSS 47MF (13X25) TP

40

ELECTRICAL P ARTS LIST

The components identified by mark have special characteristics important for safety and x-ray radiation.
These should be replaced only with the types specified in the parts list.

LOC P ART-CODE P ART-NAME P ART-DESC

C119 CMXL2D104J C MYLAR MEU 200V 0.1MF J(TP)
C120 CEXF2A470V C ELECTRO 100V RSS 47MF (10X16) TP
C123 CMXM2A472J C MYLAR 100V 4700PF J (TP)
C124 CEXF1C471V C ELECTRO 16V RSS 470MF (10X12.5)TP
C130 CH1FDF472M C CERA AC HIKB AC400V 4700PF M
C140 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C141 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C142 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C143 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C144 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C147 CMXL2G273J C MYLAR MEU 400V 0.027MF J (TP)
C148 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP
C401 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
C402 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C403 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C404 CCXB1H561K C CERA 50V B 560PF K (TAPPING)
C406 CMXM2A222J C MYLAR 100V 2200PF J (TP)
C407 CMXL2A224J C MYLAR 100V MEU 0.22MF J
C408 CMXL2A474J C MYLAR MEU 100V 0.47MF J
C409 CEXF1H330V C ELECTRO 50V RSS 33MF (6.3X11) TP
C410 CMXM2A273J C MYLAR 100V 0.027MF J (TP)
C411 CMXM2A153J C MYLAR 100V 0.015MF J (TP)
C420 CEXF1C331C C ELECTRO RUS 16V 330MF (8.0*11.5)
C439 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C501 CCZB1H101K C CERA 50V B 100PF K
C502 CMXM2A563J C MYLAR 100V 0.056MF J (TP)
C503 CMXM2A223J C MYLAR 100V 0.022MF J TP
C504 CMXM2A104J C MYLAR 100V 0.1MF J (TP)
C505 CXSL1H821J C CERA 50V SL 820PF J
C506 CMXL2A183J C MYLAR MEU 100V 0.018MF J
C507 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
C508 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
C509 CCXB1H221K C CERA 50V B 220PF K (TAPPING)
C510 CEXD1C220F C ELECTRO 16V RND 22MF (6.3X11) TP
C511 CEXF2E330V C ELECTRO 250V RSS 33MF (13X25) TP
C512 CMXL2A224J C MYLAR 100V MEU 0.22MF J
C513 CXSL1H821J C CERA 50V SL 820PF J
C515 CMXM2A102J C MYLAR 100V 1000PF J (TP)
C516 CMXM2A104J C MYLAR 100V 0.1MF J (TP)

41

LOC P ART-CODE P ART-NAME P ART-DESC

C517 CXCH1H120J C CERA 50V CH 12PF J (TAPPING)
C518 CEXF1H470V C ELECTRO 50V RSS 47MF (6.3X11) TP
C519 CMXM2A473J C MYLAR 100V 0.047MF J (TP)
C520 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP
C521 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C522 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C523 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
C524 CEXF2E100V C ELECTRO 250V RSS 10MF (10X20) TP
C526 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C527 CXCH1H560J C CERA 50V CH 56PF J (TAPPING)
C528 CMXL1J154J C MYLAR 63V MEU 0.15MF J
C529 CMXL1J474J C MYLAR 63V MEU 0.47MF J
C530 CMXL1J224J C MYLAR 63V MEU 0.22MF J (TP)
C531 CEXF1E470V C ELECTRO 25V RSS 47MF (5X11) TP
C532 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C533 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP
C536 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C537 CEXF1H479V C ELECTRO 50V RSS 4.7MF (5X11) TP
C540 CCZF1H103Z C CERA 50V F 0.01MF Z
C541 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP
C542 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C543 CCXB2H101K C CERA 500V B 100PF K (TAPPING)
C544 CCXB2H102K C CERA 500V B 1000PF K (TAPPING)
C545 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP
C546 CCXB3D221K C CERA 2KV B 220PF K (TAPPING)
C547 CMXH3C222J C MYLAR 1.6KV BUP 2200PF J (TP)
C548 CMXH3C222J C MYLAR 1.6KV BUP 2200PF J (TP)
C549 CCXB3A222K C CERA HIKB 1KV 2200PF K
C550 CEXF1E331V C ELECTRO 25V RSS 330MF (10X12.5)TP
C553 CMXL2E473J C MYLAR MEU 250V 0.047MF J(TP)
C556 CCXB2H332K C CERA 500V B 3300PF K (TAPPING)
C559 CEXF2C220V C ELECTRO 160V RSS 22MF (10X20) TP
C566 CMXF2D104J C MYLAR MPP 200V 0.1MF J
C567 CMXF2D184J C MYLAR MPP 200V 0.18MF J (TP)
C568 CMXF2D474J C MYLAR MPP 200V 0.47MF J
C569 CMXF2D274J C MYLAR 200V MPP 0.27MF J (TP)
C570 CMXF2D124J C MYLAR MPP 200V 0.12MF J
C571 CMXF2D124J C MYLAR MPP 200V 0.12MF J
C573 CMXF2D624J C MYLAR MPP 200V 0.62MF J

42

LOC P ART-CODE P ART-NAME P ART-DESC

43

C577 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C578 CEXF1E221V C ELECTRO 25V RSS 220MF (8X11.5) TP
C579 CMXB2A122G C MYLAR EU 100V 1200PF G
C581 CZCH1H390J C CERA CH 50V 39PF J AXIAL 52MM
C582 CCZB1H391K C CERA 50V B 390PF K
C583 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C584 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP
C585 CCZB1H221K C CERA 50V B 220PF K
C586 CEXF1C101V C ELECTRO 16V RSS 100MF (6.3X11) TP
C593 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C595 CEXF1H470V C ELECTRO 50V RSS 47MF (6.3X11) TP
C596 CCXF1H104Z C CERA 50V F 0.1MF Z
C598 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C599 CMXM2A823J C MYLAR 100V 0.082MF J (TP)
C601 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP
C602 CEXF2E100V C ELECTRO 250V RSS 10MF (10X20) TP
C603 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C604 CMXF2D105J C MYLAR MPP 200V 1MF J
C606 CEXF2C109V C ELECTRO 160V RSS 1MF (6.3X11) TP
C607 CMXM2A104J C MYLAR 100V 0.1MF J (TP)
C608 CEXF1E470V C ELECTRO 25V RSS 47MF (5X11) TP
C609 CMXL2E473J C MYLAR MEU 250V 0.047MF J(TP)
C610 CEXF1E470V C ELECTRO 25V RSS 47MF (5X11) TP
C611 CCZB1H681K C CERA 50V B 680PF K
C612 CMXL2A224J C MYLAR 100V MEU 0.22MF J
C613 CMXL2A224J C MYLAR 100V MEU 0.22MF J
C614 CMXM2A103J C MYLAR 100V 0.01MF J (TP)
C615 CCXB1H271K C CERA 50V B 270PF K (TAPPING)
C616 CMXM2A102J C MYLAR 100V 1000PF J (TP)
C617 CMXH3C152G C MYLAR 1.6KV BUP 1500PF G (TP)
C618 CMXM2A104J C MYLAR 100V 0.1MF J (TP)
C619 CCXB3A102K C CERA 1KV B 1000PF K (TAPPING)
C620 CCXB3D103P C CERA HIKB 2KV 0.01MF K
C621 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C623 CCXB1H391K C CERA 50V B 390PF K (TAPPING)
C624 CEXD1C100F C ELECTRO 16V RND 10MF(5X11)
C625 CCZF1H103Z C CERA 50V F 0.01MF Z
C626 CMXH3C152G C MYLAR 1.6KV BUP 1500PF G (TP)
C627 CCZF1H104Z C CERA 50V HIKF 0.1MF Z

LOC P ART-CODE P ART-NAME P ART-DESC

44

C628 CMXL2A224J C MYLAR 100V MEU 0.22MF J
C631 CMXM2A104J C MYLAR 100V 0.1MF J (TP)
C632 CEXD1H100F C ELECTRO 50V RND 10MF (8X11.5) TP
C641 CEXD1E220F C ELECTRO 25V RND 22MF 6.3*11(TP)
C642 CEXF1C331V C ELECTRO 16V RSS 330MF (8X11.5) TP
C701 CCZF1H103Z C CERA 50V F 0.01MF Z
C702 CZSL1H330J C CERA 50V SL 33PF J
C703 CZSL1H330J C CERA 50V SL 33PF J
C704 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C705 CEXF1C471V C ELECTRO 16V RSS 470MF (10X12.5)TP
C706 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C707 CCZB1H471K C CERA 50V B 470PF K
C708 CCZB1H471K C CERA 50V B 470PF K
C711 CEXF1H109V C ELECTRO 50V RSS 1MF (5X11) TP
C712 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C716 CCZB1H221K C CERA 50V B 220PF K
C717 CCZB1H221K C CERA 50V B 220PF K
C718 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C722 CMXM2A104J C MYLAR 100V 0.1MF J (TP)
C723 CCZB1H221K C CERA 50V B 220PF K
C724 CCZB1H221K C CERA 50V B 220PF K
C730 CCZB1H102K C CERA 50V B 1000PF K
C731 CCXB1H181K C CERA 50V B 180PF K (TAPPING)
C801 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C802 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C803 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C804 CEXD2A109F C ELECTRO 100V RND 1MF(5*11) TP
C810 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C812 CEXF2A109V C ELECTRO 100V RSS 1MF (5*11) TP
C813 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C821 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C822 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C823 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C831 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C832 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C834 CEXD2A109F C ELECTRO 100V RND 1MF(5*11) TP
C842 CEXF2A109V C ELECTRO 100V RSS 1MF (5*11) TP
C843 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C851 CMXM2A473J C MYLAR 100V 0.047MF J (TP)

LOC P ART-CODE P ART-NAME P ART-DESC

45

C852 CMXM2A103J C MYLAR 100V 0.01MF J (TP)
C853 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C854 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP
C857 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C858 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C859 CCZB1H101K C CERA 50V B 100PF K
C860 CEXF2E339C C ELECTRO 250V RUS 3.3MF (8X16) TP
C861 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C862 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C864 CEXD2A109F C ELECTRO 100V RND 1MF(5*11) TP
C872 CEXF2A109V C ELECTRO 100V RSS 1MF (5*11) TP
C873 HCZK104ZCA C CHIP CERA Z5U 50V 0.1MF Z 2012
C877 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
C878 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
C880 HCQK330JCA C CHIP CERA 50V CH 33PF J 2012
C881 CEXF1H220V C ELECTRO 50V RSS 22MF (5X11) TP
C884 CCXB3D102K C CERA 2KV B 1000PF K (TAPPING)
C885 CCXF2H103Z C CERA HIKF 500V 0.01MF Z
C886 HCFK103ZCA C CHIP CERA 50V Y5V 0.01MF Z 2012
C889 CEXF2A470C C ELECTRO 100V RUS 47MF (10X16) TP
C891 CCZF1H104Z C CERA 50V HIKF 0.1MF Z
C897 HCQK330JCA C CHIP CERA 50V CH 33PF J 2012
C902 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C951 CEXF1H100V C ELECTRO 50V RSS 10MF (5X11) TP
C953 CMXL2A474J C MYLAR MEU 100V 0.47MF J
C954 CEXF2C220V C ELECTRO 160V RSS 22MF (10X20) TP
C955 HCBN104MEA C CHIP CERA 100V X7R 0.1MF M 1206
CA101 9970790102 CONN AS SMH250-09+1007#24=450
CA801 9970780027 CONN AS SMH250-08+1007#24=350
CA802 9970710182 CONN AS 0.12*6*16+35072-9712=100
CN001 9970710089 CONN AS 35740-1410+UL1015#18=100
CT001 9979617020 CDT M41QAQ261X124(A)
CT002 9970710180 CRT GND AS 0.12*5*24+BL102NG=660
CT801 9979300007 SOCKET CRT ISDS08S
CW701 485923282S CONN WAFER 5267-07A STICK TYPE
CW801 9979220022 CONN WAFER SMAW250-07 (ANGLE)
CW802 9979220023 CONN WAFER SMAW250-08 (ANGLE)
CW803 9979220024 CONN WAFER SMAW250-09 (ANGLE)
CW902 9979200060 CONN WAFER 5268-03A

LOC P ART-CODE P ART-NAME P ART-DESC

46

D001 DZN4148—- DIODE 1N4148 AUTO 52MM
D002 D1N4937GP- DIODE 1N4937GP (TAPPING)
D003 D1N4937GP- DIODE 1N4937GP (TAPPING)
D004 DRU1P——- DIODE RU 1P (TAPPING)
D008 D1N4937GP- DIODE 1N4937GP (TAPPING)
D101 DS3L60—— DIODE S3L60
D102 DS3L60—— DIODE S3L60
D104 DRG2AV1—- DIODE RG2AV1
D105 DRG4——— DIODE RG4
D106 DRG4——— DIODE RG4
D107 DRK39V1—- DIODE RK39V1
D108 DRK39V1—- DIODE RK39V1
D109 DRK39V1—- DIODE RK39V1
D112 DRG2AV1—- DIODE RG2AV1
D113 D1T5G——- DIODE 1T5G
D115 D1T5G——- DIODE 1T5G
D117 D1N4002A— DIODE 1N4002
D401 DTVR1G—— DIODE TVR1G TPA1
D402 DZN4148—- DIODE 1N4148 AUTO 52MM
D403 D1N4937GP- DIODE 1N4937GP (TAPPING)
D501 DZN4148—- DIODE 1N4148 AUTO 52MM
D502 DZN4148—- DIODE 1N4148 AUTO 52MM
D503 DZN4148—- DIODE 1N4148 AUTO 52MM
D506 DDTV64F—- DIODE DTV64F
D507 DFMLG22S— DIODE FML-G22S
D508 D1N4002A— DIODE 1N4002
D509 DS2L60—-R DIODE S2L60
D510 D1T5G——- DIODE 1T5G
D512 D1T5G——- DIODE 1T5G
D514 DZN4148—- DIODE 1N4148 AUTO 52MM
D515 DZN4148—- DIODE 1N4148 AUTO 52MM
D516 DZN4148—- DIODE 1N4148 AUTO 52MM
D517 DZN4148—- DIODE 1N4148 AUTO 52MM
D518 DZN4148—- DIODE 1N4148 AUTO 52MM
D519 DZN4148—- DIODE 1N4148 AUTO 52MM
D520 DZN4148—- DIODE 1N4148 AUTO 52MM
D521 DZN4148—- DIODE 1N4148 AUTO 52MM
D522 DZN4148—- DIODE 1N4148 AUTO 52MM
D603 DZN4148—- DIODE 1N4148 AUTO 52MM

LOC P ART-CODE P ART-NAME P ART-DESC

47

D604 D1NS4——- DIODE 1NS4
D605 DZN4148—- DIODE 1N4148 AUTO 52MM
D606 DZN4148—- DIODE 1N4148 AUTO 52MM
D607 DZN4148—- DIODE 1N4148 AUTO 52MM
D611 DS2L60—-R DIODE S2L60
D614 DRU1P——- DIODE RU 1P (TAPPING)
D643 DZN4148—- DIODE 1N4148 AUTO 52MM
D644 DZN4148—- DIODE 1N4148 AUTO 52MM
D645 DZN4148—- DIODE 1N4148 AUTO 52MM
D701 DZN4148—- DIODE 1N4148 AUTO 52MM
D702 DZN4148—- DIODE 1N4148 AUTO 52MM
D703 DZN4148—- DIODE 1N4148 AUTO 52MM
D706 DZN4148—- DIODE 1N4148 AUTO 52MM
D801 DZN4148—- DIODE 1N4148 AUTO 52MM
D802 DZN4148—- DIODE 1N4148 AUTO 52MM
D803 DRLS4148— DIODE CHIP RLS4148
D831 DZN4148—- DIODE 1N4148 AUTO 52MM
D832 DZN4148—- DIODE 1N4148 AUTO 52MM
D833 DZN4148—- DIODE 1N4148 AUTO 52MM
D861 DZN4148—- DIODE 1N4148 AUTO 52MM
D862 DZN4148—- DIODE 1N4148 AUTO 52MM
D863 DRLS4148— DIODE CHIP RLS4148
D864 DZN4148—- DIODE 1N4148 AUTO 52MM
D865 DZN4148—- DIODE 1N4148 AUTO 52MM
D866 DZN4148—- DIODE 1N4148 AUTO 52MM
D867 DZN4148—- DIODE 1N4148 AUTO 52MM
D868 DZN4148—- DIODE 1N4148 AUTO 52MM
D869 DZN4148—- DIODE 1N4148 AUTO 52MM
D870 DZN4148—- DIODE 1N4148 AUTO 52MM
DB001 DPBS406GUC DIODE BRIDGE PBS406GUCA
DG001 5MG0000062 COIL DEGAUSSING DG-710B
DZ001 DDZ15BM—- DIODE ZENER DZ15BM
DZ114 DGDZJ8R2C- DIODE ZENER GDZJ 8.2C
DZ503 DGDZJ12RC- DIODE ZENER GDZJ 12C
DZ504 DGDZJ12RC- DIODE ZENER GDZJ 12C
DZ505 DGDZJ27RD- DIODE ZENER GDZJ 27D
DZ601 DGDZJ12RC- DIODE ZENER GDZJ 12C
DZ701 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ702 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B

LOC P ART-CODE P ART-NAME P ART-DESC

48

DZ703 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ704 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ705 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ706 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ707 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ851 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ852 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
DZ853 DGDZJ5R6B- DIODE ZENER GDZJ 5.6B
F001 5F3CB3122L FUSE CERA SEMKO TL 3.15A 250V MF51
F001A 9977410900 FUSE CLIP BSP3-H T0.4 SN 5.2
F001B 9977410900 FUSE CLIP BSP3-H T0.4 SN 5.2
IC001 1STRF6656- IC POWER STR-F6656
IC102 1KA78R12— IC REGULATOR KA78R12
IC103 1KA78R12— IC REGULATOR KA78R12
IC104 1K1A7912P1 IC REGULATOR KIA7912PI
IC105 1K1A7805P1 IC REGULATOR KIA7805PI
IC106 1SE140N—- IC AMP SE140N
IC108 1K1A7806P1 IC REGULATOR KIA7806PI
IC401 1KA2142—- IC V-OUT KA2142
IC501 1TDA9110— IC DEFLECTION TDA9110
IC502 1DBL358—- IC DBL358 DUAL OP-AMP
IC503 1UPC1555C- IC UPC1555C
IC504 1K1A7042P- IC SWITCH KIA7042P
IC601 1KA7500B— IC KA7500B
IC602 1DBL358—- IC DBL358 DUAL OP-AMP
IC701 1DWM209T— IC MICOM 68HC705BD32
IC702 124C08—— IC EEPROM 24C08
IC703 1KA7542—- IC VOTAGE DETECTOR KA7542
IC801 1KA2500—- IC KA2500
IC802 1LSC4523P2 IC OSD LSC4523P2
IC803 1LM2403T— IC VIDEO OUTPUT LM2403T
IC804 1DBL358—- IC DBL358 DUAL OP-AMP
IC903 1L272M—— IC L272M
L501 5CPZ100K02 COIL PEAKING 10UH K (AXIAL 3.5MM)
L502 5MH0000061 COIL H-LINEARITY TRL-7R5
L801 5CPZ568K02 COIL PEAKING 0.56UH K (AXIAL 3.5MM)
L831 5CPZ568K02 COIL PEAKING 0.56UH K (AXIAL 3.5MM)
L851 5CPZ101K02 COIL PEAKING 100UH K (AXIAL 3.5MM)
L861 5CPZ568K02 COIL PEAKING 0.56UH K (AXIAL 3.5MM)

LOC P ART-CODE P ART-NAME P ART-DESC

49

LED01 DAL151RGW- LED AL-151RGW
LF001 5PDLF3060L FILTER LINE DLF-3060L
P001 9979500010 RECEPTACLE 03ME3D/ FILTER EMI
P101 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P102 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P501 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P502 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P503 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P601 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P801 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P802 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P803 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P908 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P909 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
P910 4857417500 TERM PIN DA-IB0214(D2.3/DY PIN)
PH001 1TLP721GR- IC PHOTO COUPLER TLP721D4GR
PR001 DECPAC140M POSISTOR ECPAC140M290
Q001 TKTC2073— TR KTC2073
Q002 TZTC3207— TR KTC3207 (AUTO)
Q104 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q105 TKSB546Y— TR KSB546-Y
Q107 TZTC3207— TR KTC3207 (AUTO)
Q402 TZTC3202Y- TR KTC3202Y (AUTO)(1959Y)
Q403 TZTA1024Y- TR KTA1024Y (949Y)
Q404 TZTA1024Y- TR KTA1024Y (949Y)
Q501 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q502 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q503 TZTC3202Y- TR KTC3202Y (AUTO)(1959Y)
Q504 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q505 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q506 TZTC3202Y- TR KTC3202Y (AUTO)(1959Y)
Q507 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q508 T1RF640—- FET IRF640
Q509 T2SC5411— TR 2SC5411
Q510 T2SJ449—- TR 2SJ449
Q511 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q512 TKSC2383Y- TR KSC 2383-Y
Q513 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q514 T1RF640—- FET IRF640

LOC P ART-CODE P ART-NAME P ART-DESC

50

Q515 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q516 T1RF640—- FET IRF640
Q518 T1RF640—- FET IRF640
Q520 T1RF640—- FET IRF640
Q522 T1RF640—- FET IRF640
Q530 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q532 T2N3904—- TR 2N3904
Q533 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q601 T2N3904—- TR 2N3904
Q602 T2SK2847— FET 2SK2847
Q603 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q604 TZTC3202Y- TR KTC3202Y (AUTO)(1959Y)
Q605 T2N3904—- TR 2N3904
Q606 TKTC2073— TR KTC2073
Q607 TKSB546Y— TR KSB546-Y
Q608 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q610 T2SJ449—- TR 2SJ449
Q611 TSSS3N80A- FET SSS3N80A
Q612 TZTC3202Y- TR KTC3202Y (AUTO)(1959Y)
Q613 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q616 T2SC4630— TR 2SC4630
Q644 TZTA1270Y- TR KTA1270Y(AUTO)(562Y)
Q701 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q702 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q703 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q704 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q715 TZTC3198Y- TR KTC3198Y-(1815Y) (AUTO)
Q801 TZTC3206Y- TR KTC3206Y (2229Y)
Q802 TKSA910Y— TR KSA910Y
Q831 TZTC3206Y- TR KTC3206Y (2229Y)
Q832 TKSA910Y— TR KSA910Y
Q861 TZTC3206Y- TR KTC3206Y (2229Y)
Q862 TKSA910Y— TR KSA910Y
R001 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R002 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R003 RW01Z188JN R WIRE WOUND 1W 0.18 OHM J NON-INDUCT
R005 RS02Z911J- R M-OXIDE FILM 2W 910 OHM J (TAPPING)
R006 RD-AZ682J- R CARBON FILM 1/6 6.8K OHM J
R007 RN-AZ5621F R METAL FILM 1/6 5.62K OHM F

LOC P ART-CODE P ART-NAME P ART-DESC

51

R008 RD-4Z100J- R CARBON FILM 1/4 10 OHM J
R009 RS01Z333J- R M-OXIDE FILM 1W 33K OHM J (TAPPING)
R010 RS02Z473J- R M-OXIDE FILM 2W 47K OHM J (TAPPING)
R011 RD-2Z105J- R CARBON FILM 1/2 1M OHM J
R012 RD-2Z105J- R CARBON FILM 1/2 1M OHM J
R013 RS02Z333J- R M-OXIDE FILM 2W 33K OHM J
R014 RD-2Z474J- R CARBON FILM 1/2 470K OHM J
R018 RW01Z188JN R WIRE WOUND 1W 0.18 OHM J NON-INDUCT
R025 RD-AZ473J- R CARBON FILM 1/6 47K OHM J
R028 RS02Z911J- R M-OXIDE FILM 2W 910 OHM J (TAPPING)
R103 RS02Z689J- R M-OXIDE FILM 2W 6.8 OHM J
R104 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R111 RD-2Z100J- R CARBON FILM 1/2 10 OHM J
R112 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R113 RD-AZ473J- R CARBON FILM 1/6 47K OHM J
R114 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R115 RD-4Z121J- R CARBON FILM 1/4 120 OHM J
R116 RS02Z154J- R M-OXIDE FILM 2W 150K OHM J(TAPPING)
R119 RD-2Z243J- R CARBON FILM 1/2 24K OHM J
R120 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R121 RD-AZ473J- R CARBON FILM 1/6 47K OHM J
R126 RS02Z569J- R M-OXIDE FILM 2W 5.6 OHM J (TAPPING)
R128 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R130 RD-2Z565J- R CARBON FILM 1/2 5.6M OHM J
R131 RD-2Z565J- R CARBON FILM 1/2 5.6M OHM J
R132 RD-2Z432J- R CARBON FILM 1/2 4.3K OHM J
R133 RD-2Z104J- R CARBON FILM 1/2 100K OHM J
R134 RD-2Z334J- R CARBON FILM 1/2 330K OHM J
R140 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J
R141 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J
R149 RN-AZ1002F R METAL FILM 1/6 10K OHM F
R150 RN-AZ5119F R METAL FILM 1/6 51.1OHM F
R401 RN-AZ1842F R METAL FILM 1/6 18.4K OHM F
R402 RN-AZ2261F R METAL FILM 1/6 2.26K OHM F
R403 RN-AZ9531F R METAL FILM 1/6 9.53K OHM F
R404 RN-AZ5621F R METAL FILM 1/6 5.62K OHM F
R405 RD-4Z109J- R CARBON FILM 1/4 1 OHM J
R407 RS02Z221J- R M-OXIDE FILM 2W 220 OHM J
R408 RW02Z918JN R WIRE WOUND 2W 0.91 OHM J NON-INDUCT

LOC P ART-CODE P ART-NAME P ART-DESC

52

R409 RD-AZ153J- R CARBON FILM 1/6 15K OHM J
R411 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J
R412 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R413 RD-4Z471J- R CARBON FILM 1/4 470 OHM J
R414 RD-AZ152J- R CARBON FILM 1/6 1.5K OHM J
R415 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R416 RD-AZ303J- R CARBON FILM 1/6 30K OHM J
R417 RD-AZ184J- R CARBON FILM 1/6 180K OHM J
R418 RD-AZ154J- R CARBON FILM 1/6 150K OHM J
R501 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R502 RD-AZ100J- R CARBON FILM 1/6 10 OHM J
R503 RN-AZ5901F R METAL FILM 1/6 5.90K OHM F
R504 RN-AZ1211F R METAL FILM 1/6 1.21K OHM F
R505 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R506 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R507 RD-AZ363J- R CARBON FILM 1/6 36K OHM J
R508 RN-AZ8201F R METAL FILM 1/6 8.2K OHM F
R509 RN-AZ7500F R METAL FILM 1/6 750.0 OHM F
R510 RD-AZ681J- R CARBON FILM 1/6 680 OHM J
R511 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R512 RN-AZ7500F R METAL FILM 1/6 750.0 OHM F
R513 RN-AZ6191F R METAL FILM 1/6 6.19K OHM F
R514 RS01Z109J- R M-OXIDE FILM 1W 1 OHM J (TAPPING)
R515 RN-AZ9531F R METAL FILM 1/6 9.53K OHM F
R516 RN-AZ5621F R METAL FILM 1/6 5.62K OHM F
R517 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R518 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R519 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R520 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R521 RD-AZ303J- R CARBON FILM 1/6 30K OHM J
R522 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J
R523 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R524 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R525 RD-AZ564J- R CARBON FILM 1/6 560K OHM J
R526 RS02Z229J- R M-OXIDE FILM 2W 2.2 OHM J(TAPPING)
R527 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R528 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R529 RD-2Z100J- R CARBON FILM 1/2 10 OHM J
R530 RD-4Z102J- R CARBON FILM 1/4 1K OHM J

LOC P ART-CODE P ART-NAME P ART-DESC

53

R531 RD-4Z152J- R CARBON FILM 1/4 1.5K OHM J
R532 RS02Z229J- R M-OXIDE FILM 2W 2.2 OHM J(TAPPING)
R533 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R534 RD-AZ512J- R CARBON FILM 1/6 5.1K OHM J
R535 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R536 RS02Z750J- R M-OXIDE FILM 2W 75 OHM J (TAPPING)
R537 RN-AZ4752F R METAL FILM 1/6 47.5K OHM F
R539 RD-AZ105J- R CARBON FILM 1/6 1M OHM J
R540 RD-4Z472J- R CARBON FILM 1/4 4.7K OHM J
R541 RD-AZ104J- R CARBON FILM 1/6 100K OHM J
R542 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R543 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R544 RD-4Z103J- R CARBON FILM 1/4 10K OHM J
R545 RD-4Z203J- R CARBON FILM 1/4 20K OHM J
R546 RD-4Z203J- R CARBON FILM 1/4 20K OHM J
R548 RD-2Z229J- R CARBON FILM 1/2 2.2 OHM J
R549 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R550 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R551 RD-AZ104J- R CARBON FILM 1/6 100K OHM J
R552 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R553 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J
R554 RD-4Z331J- R CARBON FILM 1/4 330 OHM J
R555 RS02Z430J- R M-OXIDE FILM 2W 43 OHM J
R557 RD-AZ104J- R CARBON FILM 1/6 100K OHM J
R558 RS02Z309J- R M-OXIDE FILM 2W 3 OHM J (TAPPING)
R559 RD-AZ105J- R CARBON FILM 1/6 1M OHM J
R560 RN-4Z4990F R METAL FILM 1/4W 499 OHM F
R561 RN-AZ9091F R METAL FILM 1/6 9.09K OHM F
R562 RN-AZ1242F R METAL FILM 1/6 12.4K OHM F
R563 RN-AZ9091F R METAL FILM 1/6 9.09K OHM F
R564 RD-AZ431J- R CARBON FILM 1/6 430 OHM J
R565 RN-AZ7501F R METAL FILM 1/6 7.50K OHM F
R566 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R567 RN-AZ7680F R METAL FILM 1/6W 768 OHM F
R568 RN-AZ2152F R METAL FILM 1/6 21.5K OHM F
R569 RS02Z151J- R M-OXIDE FILM 2W 150 OHM J (TAPPING)
R570 RN-AZ4700F R METAL FILM 1/6 470.0 OHM F
R571 RS01Z109J- R M-OXIDE FILM 1W 1 OHM J (TAPPING)
R572 RD-AZ103J- R CARBON FILM 1/6 10K OHM J

LOC P ART-CODE P ART-NAME P ART-DESC

54

R573 RS02Z309J- R M-OXIDE FILM 2W 3 OHM J (TAPPING)
R574 RD-4Z561J- R CARBON FILM 1/4 560 OHM J
R576 RD-2Z229J- R CARBON FILM 1/2 2.2 OHM J
R577 RD-AZ512J- R CARBON FILM 1/6 5.1K OHM J
R578 RD-AZ152J- R CARBON FILM 1/6 1.5K OHM J
R579 RN-AZ1212F R METAL FILM 1/6 12.1K OHM F
R580 RD-AZ303J- R CARBON FILM 1/6 30K OHM J
R581 RS01Z109J- R M-OXIDE FILM 1W 1 OHM J (TAPPING)
R582 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R583 RN-AZ1001F R METAL FILM 1/6 1K OHM F
R584 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R585 RN-AZ4700F R METAL FILM 1/6 470.0 OHM F
R586 RD-AZ104J- R CARBON FILM 1/6 100K OHM J
R587 RD-AZ104J- R CARBON FILM 1/6 100K OHM J
R588 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R589 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R590 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R591 RS02Z758J- R M-OXIDE FILM 2W 0.75 OHM J
R592 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R593 RD-AZ183J- R CARBON FILM 1/6 18K OHM J
R594 RD-AZ183J- R CARBON FILM 1/6 18K OHM J
R595 RD-AZ183J- R CARBON FILM 1/6 18K OHM J
R596 RD-AZ183J- R CARBON FILM 1/6 18K OHM J
R597 RD-AZ183J- R CARBON FILM 1/6 18K OHM J
R598 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R601 RN-AZ7500F R METAL FILM 1/6 750.0 OHM F
R602 RD-4Z100J- R CARBON FILM 1/4 10 OHM J
R603 RD-4Z751J- R CARBON FILM 1/4 750 OHM J
R604 RS02Z229J- R M-OXIDE FILM 2W 2.2 OHM J(TAPPING)
R605 RD-4Z100J- R CARBON FILM 1/4 10 OHM J
R606 RD-4Z100J- R CARBON FILM 1/4 10 OHM J
R607 RD-AZ273J- R CARBON FILM 1/6 27K OHM J
R608 RD-AZ202J- R CARBON FILM 1/6 2K OHM J
R609 RS02Z181J- R M-OXIDE FILM 2W 180 OHM J (TAPPING)
R610 RD-AZ202J- R CARBON FILM 1/6 2K OHM J
R611 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R612 RN-AZ4700F R METAL FILM 1/6 470.0 OHM F
R613 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R614 RD-2Z100J- R CARBON FILM 1/2 10 OHM J

LOC P ART-CODE P ART-NAME P ART-DESC

55

R615 RN-AZ4700F R METAL FILM 1/6 470.0 OHM F
R616 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R617 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R618 RD-AZ821J- R CARBON FILM 1/6 820 OHM J
R619 RD-AZ473J- R CARBON FILM 1/6 47K OHM J
R620 RD-2Z472J- R CARBON FILM 1/2 4.7K OHM J
R621 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J
R622 RS02Z470J- R M-OXIDE FILM 2W 47 OHM J (TAPPING)
R623 RD-2Z470J- R CARBON FILM 1/2 47 OHM J
R624 RD-2Z470J- R CARBON FILM 1/2 47 OHM J
R625 RD-AZ433J- R CARBON FILM 1/6 43K OHM J
R626 RD-AZ432J- R CARBON FILM 1/6 4.3K OHM J
R627 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R628 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R629 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R630 RD-AZ752J- R CARBON FILM 1/6 7.5K OHM J
R631 RN-4Z9092F R METAL FILM 1/4 90.9K OHM F
R632 RD-AZ183J- R CARBON FILM 1/6 18K OHM J
R633 RS02Z100J- R M-OXIDE FILM 2W 10 OHM J (TAPPING)
R634 RD-4Z104J- R CARBON FILM 1/4 100K OHM J
R636 RD-AZ182J- R CARBON FILM 1/6 1.8K OHM J
R637 RN-AZ6191F R METAL FILM 1/6 6.19K OHM F
R638 RD-AZ333J- R CARBON FILM 1/6 33K OHM J
R639 RD-2Z473J- R CARBON FILM 1/2 47K OHM J
R642 RS01Z109J- R M-OXIDE FILM 1W 1 OHM J (TAPPING)
R643 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R644 RD-2Z334J- R CARBON FILM 1/2 330K OHM J
R646 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J
R647 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R654 RD-2Z364J- R CARBON FILM 1/2 360K OHM J
R655 RD-AZ301J- R CARBON FILM 1/6 300 OHM J
R656 RD-AZ272J- R CARBON FILM 1/6 2.7K OHM J
R667 RD-4Z100J- R CARBON FILM 1/4 10 OHM J
R670 RD-AZ243J- R CARBON FILM 1/6 24K OHM J
R679 RN-AZ5621F R METAL FILM 1/6 5.62K OHM F
R680 RN-AZ2261F R METAL FILM 1/6 2.26K OHM F
R681 RD-AZ104J- R CARBON FILM 1/6 100K OHM J
R682 RD-4Z823J- R CARBON FILM 1/4 82K OHM J
R683 RD-AZ104J- R CARBON FILM 1/6 100K OHM J

LOC P ART-CODE P ART-NAME P ART-DESC

56

R684 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R685 RD-4Z433J- R CARBON FILM 1/4 43K OHM J
R701 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R702 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R703 RD-AZ473J- R CARBON FILM 1/6 47K OHM J
R704 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R705 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R714 RD-AZ271J- R CARBON FILM 1/6 270 OHM J
R715 RD-AZ201J- R CARBON FILM 1/6 200 OHM J
R716 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R717 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R723 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R724 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R725 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R729 RD-AZ473J- R CARBON FILM 1/6 47K OHM J
R730 RN-AZ2002F R METAL FILM 1/6 20.0K OHM F
R731 RN-AZ1052F R METAL FILM 1/6 10.5K OHM F
R732 RN-AZ2322F R METAL FILM 1/6 23.2K OHM F
R733 RN-AZ4752F R METAL FILM 1/6 47.5K OHM F
R734 RN-AZ9092F R METAL FILM 1/6 90.9K OHM F
R736 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R750 RD-AZ392J- R CARBON FILM 1/6 3.9K OHM J
R753 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R754 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R755 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R756 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R758 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R759 RN-AZ2261F R METAL FILM 1/6 2.26K OHM F
R760 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R761 RN-AZ2261F R METAL FILM 1/6 2.26K OHM F
R762 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R763 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R764 RD-AZ182J- R CARBON FILM 1/6 1.8K OHM J
R765 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R766 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R770 RD-AZ472J- R CARBON FILM 1/6 4.7K OHM J
R801 HRFT750JCA R CHIP 1/10 75 OHM J 2012
R802 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R803 HRFT391JCA R CHIP 1/10 390 OHM J 2012

LOC P ART-CODE P ART-NAME P ART-DESC

57

R804 RD-AZ100J- R CARBON FILM 1/6 10 OHM J
R806 RD-AZ181J- R CARBON FILM 1/6 180 OHM J
R807 RC-2Z470J- R CARBON COMP 1/2 47 OHM J
R808 RD-AZ330J- R CARBON FILM 1/6 33 OHM J
R809 RD-AZ330J- R CARBON FILM 1/6 33 OHM J
R810 RD-AZ330J- R CARBON FILM 1/6 33 OHM J
R812 RD-AZ823J- R CARBON FILM 1/6 82K OHM J
R814 HRFT101JCA R CHIP 1/10 100 OHM J 2012
R816 RD-4Z390J- R CARBON FILM 1/4 39 OHM J
R818 RD-AZ513J- R CARBON FILM 1/6 51K OHM J
R819 HRFT222JCA R CHIP 1/10 2.2K OHM J 2012
R823 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R824 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R825 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R826 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R827 RD-4Z101J- R CARBON FILM 1/4 100 OHM J
R828 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R829 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R831 HRFT750JCA R CHIP 1/10 75 OHM J 2012
R832 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R833 HRFT391JCA R CHIP 1/10 390 OHM J 2012
R834 RD-AZ100J- R CARBON FILM 1/6 10 OHM J
R836 RD-AZ181J- R CARBON FILM 1/6 180 OHM J
R837 RC-2Z470J- R CARBON COMP 1/2 47 OHM J
R842 RD-AZ823J- R CARBON FILM 1/6 82K OHM J
R844 HRFT101JCA R CHIP 1/10 100 OHM J 2012
R846 RD-4Z390J- R CARBON FILM 1/4 39 OHM J
R848 RD-AZ513J- R CARBON FILM 1/6 51K OHM J
R849 HRFT222JCA R CHIP 1/10 2.2K OHM J 2012
R851 HRFT202JCA R CHIP 1/10 2K OHM J 2012
R852 HRFT301JCA R CHIP 1/10 300 OHM J 2012
R853 HRFT102JCA R CHIP 1/10 1K OHM J 2012
R854 HRFT474JCA R CHIP 1/10 470K OHM J 2012
R855 HRFT101JCA R CHIP 1/10 100 OHM J 2012
R856 HRFT222JCA R CHIP 1/10 2.2K OHM J 2012
R857 HRFT222JCA R CHIP 1/10 2.2K OHM J 2012
R858 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R859 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R861 HRFT750JCA R CHIP 1/10 75 OHM J 2012

LOC P ART-CODE P ART-NAME P ART-DESC

58

R862 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R863 HRFT391JCA R CHIP 1/10 390 OHM J 2012
R864 RD-AZ100J- R CARBON FILM 1/6 10 OHM J
R866 RD-AZ181J- R CARBON FILM 1/6 180 OHM J
R867 RC-2Z470J- R CARBON COMP 1/2 47 OHM J
R868 HRFT000JCA R CHIP 1/10 0 OHM J 2012
R869 HRFT000JCA R CHIP 1/10 0 OHM J 2012
R870 HRFT000JCA R CHIP 1/10 0 OHM J 2012
R872 RD-AZ823J- R CARBON FILM 1/6 82K OHM J
R874 HRFT101JCA R CHIP 1/10 100 OHM J 2012
R876 RD-4Z750J- R CARBON FILM 1/4 75 OHM J
R878 RD-AZ513J- R CARBON FILM 1/6 51K OHM J
R879 HRFT222JCA R CHIP 1/10 2.2K OHM J 2012
R880 HRFT102JCA R CHIP 1/10 1K OHM J 2012
R881 RD-AZ563J- R CARBON FILM 1/6 56K OHM J
R882 HRFT153JCA R CHIP 1/10 15K OHM J 2012
R884 RD-4Z564J- R CARBON FILM 1/4 560K OHM J
R885 RD-2Z821J- R CARBON FILM 1/2 820 OHM J
R886 RD-2Z333J- R CARBON FILM 1/2 33K OHM J
R887 RD-2Z109J- R CARBON FILM 1/2 1 OHM J
R888 RD-4Z103J- R CARBON FILM 1/4 10K OHM J
R889 RD-4Z103J- R CARBON FILM 1/4 10K OHM J
R890 RD-4Z103J- R CARBON FILM 1/4 10K OHM J
R892 RD-4Z330J- R CARBON FILM 1/4 33 OHM J
R893 RD-4Z330J- R CARBON FILM 1/4 33 OHM J
R894 RD-AZ821J- R CARBON FILM 1/6 820 OHM J
R895 HRFT244JCA R CHIP 1/10 240K OHM J 2012
R896 HRFT243JCA R CHIP 1/10 24K OHM J 2012
R897 RD-AZ101J- R CARBON FILM 1/6 100 OHM J
R909 HRFT472JCA R CHIP 1/10 4.7K OHM J 2012
R910 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J
R911 RD-AZ203J- R CARBON FILM 1/6 20K OHM J
R951 HRFT124JCA R CHIP 1/10 120K OHM J 2012
R952 RD-AZ103J- R CARBON FILM 1/6 10K OHM J
R953 RD-AZ392J- R CARBON FILM 1/6 3.9K OHM J
R954 HRFT103JCA R CHIP 1/10 10K OHM J 2012
R955 HRFT823JCA R CHIP 1/10 82K OHM J 2012
R956 HRFT622JCA R CHIP 1/10 6.2K OHM J 2012
R957 RD-4Z560J- R CARBON FILM 1/4 56 OHM J

LOC P ART-CODE P ART-NAME P ART-DESC

59

R958 RD-AZ102J- R CARBON FILM 1/6 1K OHM J
R963 HRFT823JCA R CHIP 1/10 82K OHM J 2012
RL001 5SC0101005 SW RELAY HR-CR313 DC12V 1C-1P
S001 9970800019 CABLE SIGNAL AS 15P+2C/DDC=1.5M(IVY)
SG801 DWSP201M— SURGE ABSORBER WSP-201M
SG831 DWSP201M— SURGE ABSORBER WSP-201M
SG861 DWSP201M— SURGE ABSORBER WSP-201M
SG891 4SG0D00104 SPARK GAP S-23 1.5KV
SW701 5S50101Z01 SW TACT KPT-1115VM 1C-1P
SW702 5S50101Z01 SW TACT KPT-1115VM 1C-1P
SW703 5S50101Z01 SW TACT KPT-1115VM 1C-1P
SW704 5S50101Z01 SW TACT KPT-1115VM 1C-1P
SW705 5S50101Z01 SW TACT KPT-1115VM 1C-1P
T001 5RM0000092 TRANS SMPS DMT-710C
T002 5RY0000004 TRANS SYNC DST-710C
T501 5RH0000106 FBT FFA76021U
T501C 9970K00012 CORE FERRITE RING-23
T502 5RD0000039 TRANS DRIVE DDT-710C
T503 5R50000006 TRANS BUCK DT-710CB
T601 5R50000005 TRANS BUCK DT-710CA
T602 5R50000007 TRANS FOCUS DT-710CF
TH001 DTP8D13—- THERMISTOR TP8D13
TL001 5M20000001 COIL TILT TC-17B
VR604 RV6121503P R SEMI FIXED CCT 063BT 50K OHM B TAP
VR605 RV6421303P R SEMI FIXED CCT 065AT 30K OHM B TAP
X701 5XE6R0000E CRYSTAL QUARTZ HC-49/U 6MHZ 22PF 30PPM

LOC P ART-CODE P ART-NAME P ART-DESC