HDCT304, HDCT365
Doc #: PGH-HDCT3036.01 Revised 29 Jan 2019 Page 1 of 5
All tolerances: ±¹/₁₆” (±1.6 mm) unless otherwise stated.
Heritage
®
30”, 36” Dual Cooktop
WARNING
• Observe all governing codes and ordinances during planning/
installation.
• Contact the local building department for details. This cooktop must
be installed as specified in its installation instructions.
HDCT304
PLANNING
GUIDE
Front of cooktop
Power cord
Gas inlet
2 1/8”
HDCT304
Chassis
(5.4 cm)
3 3/4”
(9.5 cm)
13/16”
5/8”
(1.6 cm)
(2.1 cm)
Power Cord and Gas-Inlet Location
Top panel overhang
All specications subject to change without notice. www.dacor.com Ph. 800.793.0093
HDCT304, HDCT365
Page 2 of 5
All tolerances: ±¹/₁₆” (±1.6 mm) unless otherwise stated.
HDCT365
Heritage
®
30”, 36” Dual Cooktop
PLANNING
GUIDE
HDCT365
Power Cord and Gas Inlet Location
Chassis
Gas inlet
Front of cooktop
Power cord in
2 1/4”
(5.7 cm)
1 3/8”
(3.5 cm)
Top panel overhang
1”
(2.5 cm)
1”
(2.5 cm)
All specications subject to change without notice. www.dacor.com Ph. 800.793.0093