ED30, ID30
23 3/4” (603mm)
ED Door Panel
Height
29 5/8" (752mm)
ID Door Panel
Height
26 7/8" (683mm)
1 1/8"
(29mm)
47" (1194mm)*
* Allows for drain hose on back of unit
19 1/4" (489mm) to
20 1/4" (514mm)*
36 1/4"
(921mm)
to
34"
(864mm)
Adjustable
Toe-kick
Front Plate
1 5/8"
(41mm)
ED or ID30 – 29 7/8" (759mm)
Cycle ON indicating lights
ED or ID30 – 30" Min. (762mm)
Utilities Access Hole
34”
(864mm)
to
36 1/4"
(921mm)
5"
(127mm)
8"
(203mm)
Anti-tip anchor into material under
countertop or adjacent cabinets
90˚ 90˚
24" Min.
(610mm)
Revised
01/08/08
SIDE VIEW - DOOR OPEN
30” Wide Dishwashers
PLANNING
1/2
SIDE VIEW - DOOR OPEN
GUIDE
Model No. Power Requirements
Web: http://www.Dacor.com
ED30
ID30 218 lbs.
Corporate Phone: 800-793-0093
FRONT VIEW
15 A, 120 Vac, 60 Hz dedicated, grounded, three
prong power outlet. See model number label on
product for total connected loaded.
CUT-OUT FRONT VIEW
Water
Pressure
20 to 120 psi
(138 - 827 kPa)
Water
Temperature
120°F, minimum
Approximate
Shipping Weight
215 lbs.
Specifications are subject to change without notice.
See installation instructions for additional details.
10.1
ED30, ID30
6 7/8"
(175mm)
18"
(457mm)
1/2"
(13mm)
7/16" (11mm)
Revised
01/08/08
30” Wide Dishwashers
CUSTOM PANEL INSTALLATION (ID30 ONLY)
PLANNING
2/2
GUIDE
Model No. Width Maximum Height Maximum Thickness
ID30 29 7/8” (760mm) 30” (762mm)* 3/4” (19mm)
CUSTOM PANEL OVERALL DIMENSIONS
(ID MODEL ONLY)
*Without installation of a custom toe kick, see template included with product
for further details.
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
CUSTOM PANEL HOLE ALIGNMENT
ADJUSTING THE DISHWASHER DOOR
Specifications are subject to change without notice.
See installation instructions for additional details.
10.2