DABIATLANTE Galla200, Croma200 Installation Manual

Download

Summary

Orientations about Ergonomy..................................................... 01

Position of the sewer point in relation to the chairs in the work

position ......................................................................................... 01

Specifications of the installation points .................................... 02

Gauge ............................................................................................ 02

Dental Office Items ....................................................................... 03

Chair Upholstery Items................................................................. 03

Delivery unit head items .............................................................. 03

Delivery Unit Arm Items ............................................................... 03

Chair Items “SF” ........................................................................... 03

Cuspidor items .............................................................................. 03

Light Reflector Items .................................................................... 03

Titanium Chair 200 Installation.................................................... 04

Support Y ...................................................................................... 06

Support Y Installation .................................................................. 07

Techno Chair Installation - Cuspidor ........................................... 09

Cuspidor Installation .................................................................... 10

Techno Chair 200 Suction System............................................... 11

PAD Connection Assistent Arm ........................................................ 12

Final Procedures ........................................................................... 14

Techno Chair 200 - Delivery Unit .................................................. 15

Delivery Unit Installation ............................................................. 15

Connection of the Delivery Unit Hoses and Cables.................... 17

Optional Chip Blower .................................................................... 17

Optional Sodium Bicarbonate Jet ................................................. 17

Optional Flush ............................................................................... 18

Optional .........................................................................................18

Techno Chair 200 Reflector .......................................................... 20

Reflector Installation.................................................................... 20

Procedures for the Galla Chair .................................................... 22

Procedures for the Croma Chair.................................................. 23

Chip Blower Drawing ................................................................... 24

Connection scheme for the Techno Delivery Unit to the Techno

Unit distributor ............................................................................. 25

Connection scheme of the Techno Delivery Unit with 1 Venturi

aspirator and 1 Vac Plus aspirator .................................................. 26

Connection scheme for the Versatil Unit with 2 Venturi ........... 27

Connection scheme for Techno Unit with 1 Venturi aspirator ...... 28

Connection scheme for the Versatil Unit with 1 Venturi ........... 29

Connection scheme for the Techno Unit with 1 Venturi and 1 High

Suction .......................................................................................... 30

Connection scheme for Versatil Unit with 1 Venturi and 1 High

Suction .......................................................................................... 31

Connection scheme for Versatil Unit with 1 Venturi and 2 High

Suction .......................................................................................... 32

Connection scheme for the Versatil Unit with 2 High Power .... 33

Connection scheme for the Techno Unit with 1 Vac Plus and l High

Suction .......................................................................................... 34

Connection scheme for the Versatil Unit with l Vac Plus and 1 High

Suction .......................................................................................... 35

Suction System ............................................................................. 36

Venturi System..............................................................................36

High Suction System ..................................................................... 36

Vac Plus System.............................................................................37

Orientations about ergonomy

0,50

sewer

0,15

1,50

1,00

0,50

1,40

2,90

minimum

0,60

140

sewer

the patient´s mouth

140

sewer

the patient´s mouth

140

sewer

the patient´s mouth

Before starting the installation, make sure the sewer, air, water and electric power points are disposed in such a way as to enable the office to be installed in a space that is in accordance with the ergonomy orientations.

For installation of the equipment in the office, ISO/FDI decided to divide the office in areas. To limit these areas, imagine the hands of a clock, where the center is the axis of the hands and corresponds to the mouth of a patient lying on the dental chair positioned horizontally.

Around this center, draw three concentric circles, A, B and C of radiuses of 0.5; 1.0; and 1.5 meters respectively. The 12 o’clock position is always indicated by the patient’s head, i.e., behind the chair. In this way, the 6-12 o’clock

axis divides the office into two areas: one on the left of the chair (the dentist’s area) and the other on the right of the chair (the assistant’s area).

The area limited by the A circle, with a radius of 0.5 meters, corresponds to the Transfer Zone, where everything that is transferred to the patient’s mouth should be located, such as the instruments and the handpieces of the delivery unit. This area should accomodate both the dentist’s and his assistant’s stools.

The B circle of 1.0 meter radius limits the Useful Working Area (maximum space that can be occupied), which can be reached with the movement of a stretched arm. In this area the auxiliary table and the delivery unit should be placed.

The C circle of 1.5 meter radius limits the total office area, which should not, therefore, be more than 3 meters wide in order not to be unergonomical. This area should accomodate the fixed cabinets and the sinks, and the drawers, when opened, should be kept inside the B circle.

Illustrative drawing of orientations about ergonomy

Layout of the dental office

minimum 0,60

using the Galla model chair (measurement unit in meters).

Position of the sewer point in relation to the chairs in the work position (measurement unit in cm)

Galla chair Croma chair Versa chair

the patient´s mouth

sewer

face of base

102

Specifications of the installation points

Compressed air (tube of copper internal diam. 1/4” to 10 cm above the finished floor) - coming from the

compressed air supply line.

Electric (corrugated flexible electroduct diam. 20 mm ending 10 cm above de finished floor and 3x2,50 mm² wires of different colors 20 cm above the electroduct) - supplied from the electric power line.

Water (weldable PVC tube diam. 20 mm, ending with 90° weldable PVC knee and brass bushing 20x1/2” 5mm

above the finished floor) - connected to the water supply line.

Sewer (weldable PVC tube diam. 40 mm, ending with a 90° weldable reducing knee and with a brass bushing 25x3/4” 5 mm above the finished floor) - connected to the siphoned box of the sewer line.

Comand of aspirators of High Potency - optional (corrugated flexible electroduct diam. 20 mm ending 10 cm above the finished floor with 3x0,75 mm² wires of different colors 20 cm above the electroduct) - connected to the vacuum pump.

High power suction - optional (weldable PVC tube diam. 25 mm, ending with a 90° weldable knee and with a brash bushing 25x3/4” 5 mm above the finished floor) - connected to the vacuum pump.

Location of the installation points in relation to the bases of the chairs (unit in centimeters)

figure 01

face of base

Chair base set

Position of the connection points

Gauge

Use the gauge for positioning the chair in the office, location of the installation points on the floor and the holes for fixing the chair to the floor. (fig. 01)

The Dabi Atlante dental office has good stability in normal conditions of use, there being no need to fix the chair base to the floor.

Note: In order to meet the “CE” norm, all offices are packaged with the kit for fixing the base to the floor.

Dental Office Items

figure 02

1 2 3 4

5 6

01 - Chair Upholstery Items

• Seat upholstery

• Backrest upholstery

• Conventional headrest upholstery

• Cervical headrest upholstery (optional)

• High cervical support upholstery (optional

• Low cervical support upholstery (optional)

02 - Delivery unit head items

Chair Upholstery (fig. 02) Delivery Unit Head (fig. 02) Delivery Unit Arm (fig. 02) Chair: Carton box - Croma and Galla SF (fig. 02)

Wooden box - Versa Cuspidor (fig. 02) Light (fig. 02)

04 - Chair Items “SF”

• Headrest and headrest cover

• Chair arm

• Backrest cover and frame

• Rug

• Motor cover

• Delivery unit / Unit support

05 - Cuspidor items

• Head

• Plastic tray (Techno Delivery unit and Hasteflex)

• PET reservoir

• Aluminum tray (Techno Delivery unit and Hasteflex)

• Instrument support (optional Techno Delivery unit and Hasteflex)

• Leveling bushing (Techno Delivery unit and Hasteflex)

• Delivery unit tube (Techno and Hasteflex)

• Kit

03 - Delivery Unit Arm Items

• Delivery unit arm

• Kit

• Cuspidor

• Bowl

• Bowl pipe (Techno unit)

• Cup holder pipe (optionalTechno unit)

• Kit

06 - Light Reflector Items

• Light tubehead

• Light Reflector arm

• Transparent protector

• Kit

figure 03

Titanium Chair 200 Installation

Open the superior cover carefully, this will avoid damaging the internal parts. (fig. 03)

Remove the carton releasing the staple on the wood platform.

(fig. 04 and 05)

figure 04

figure 06

figure 05

Select the voltage as your local electrical net (fig. 06 and 07)

All chairs leave the Dabi plant connected in 220 V.

figure 07

Remove the chair from the platform wood and put it at the installation place.

Disconnect the main key and put it as it was indicated in the fig. 08, there is one correct position, pay attention .

figure 08

figure 09

When you are going to install the main key , please have a look at the cables connections.

(fig. 09 and 10)

figure 10

figure 11

Finished the connection of the cables on the key , connect the key cable on the transformer entrance. (fig. 11)

After you have connected the desired voltage take the chair up removing the lateral woods and the motor cover and the foam as well. (fig. 12 and 13)

figure 12

figure 14

figure 13

Remove the reflector post using the correct tools (fig. 14 and 15), be careful when you are removing the wood for not damage the painting or the post itself . Put away the post in the safe place , so it can not fall off in any time .

figure 15

Take the seat up , release the nuts which are on the platform wood. Take the rubber cover out and release the nuts. (fig. 16)

figure 16

figure 17

There are 2 on the rear part and 1 on the front part of the base. (fig.17 and 18)

figure 18

Release the headrest mechanism. (fig. 19 and 20)

4 Chromed Screws 5/16’’ allen to fix the headrest on the Galla Chair . For Croma Chair will be 4 screws ½’’ with nuts ½’’ .

figure 19

figure 21

figure 20

Install the headrest Galla chair using the allen key 5/16". (fig. 21 and 22)

figure 22

For Croma Chair use 4 Sixthed Zinced Screws 5/16‘’ x 1 ½’’ (27160-028/0) e 4 nuts (27410-006/

3) Sixthed 5/16 x ½ use ½” key. (fig. 23 and 24)

figure 23

figure 25

2 3

figure 24

Support Y

The support is inside the box (fig.

25) and the installation kit is together (fig. 26).

figure 26

6 7

Fixation itens kits. (fig. 27 and 28)

figure 27 figure 28

Item

3 4 5 6 7 8 9

figure 29

Quant

1 3 1 1 4 1 3 1 1

Description

Celerom attrition Bushing 10 mm Screw Zinced Plan Screw 3/16 x 1/2 (delivery unit alignment) Gib Constrain Arm Round 1/8 x 3/16 (setting finishing washer) Black Allen Screw 5/16" x 1.1/2" Zinced Hexagonal Screw 3/8"x1" Hexagonal Screw 3/16 x 5/8 (setting on the arm) Zinced Nut 3/8" x 9/16" Finishing Ring 50 x 32 mm

Support Y Installation

Put the support on the chair as is showing the figures below , using the 4 black allen screws 5/16’’ x 1 ½’’. (fig. 29)

Code

20132-006/9 27120-010/0 20869-005/3 27130-002/3 27190-024/2 20132-005/1 27160-004/9 27420-003/6 20236-206/0

figure 30

figure 32

Put the Chromed washer 50 x 32 on the support and then put the delivery unit arm as figures below. (fig. 30 and 31)

figure 31

Put the finishing screw with the correct nut and filler . This screw will limit the movements of the arm (the spin). (fig. 32)

figure 33

Take the cables through support. (fig. 33 and 34)

figure 34

Take the cables to the inside the

chair. (fig. 35 and 36)

figure 35

figure 37

figure 36

Take the cables to the chair rear. (fig. 37 and 38)

figure 38

Return the cables upper the motor support and so take them out of the chair from the front. (fig. 39 and 40)

figure 39

figure 40

Techno Chair Installation - Cuspidor

figure 41

The water bottles codes 26304-202/5 e 26289-003/0 are localizated on the delivery unit and not in the Cuspidor . The water bottle 1 litre has the code 26304-202/5.

Item

1 2 3

4 5 6 7 8

9 10 11 12

Quant

1 1 1 1 1 1 1 1 1

1 1

figure 42

Description

Pipe Cup Unit Auxiliary Basin of the Unit Base Supported Reflector Unit / Reflector Set Separating Support of Debris Bushing Cuspidor Pipe/Cuspidor Pipe Instruction Manual Box Euro Kit for System of Suction (it depends on the configuration) Unit Inferior Body Suction System Hoses (it depends of the configuration) Cup filler Plastic grid Control Panel Panel Cover Mambrane PAD Panel Support Set Chair/ Versátil Cuspidor/ Reflector

When you open the cuspidor box (fig. 41 and 42) , you will have on the box the follow items:

Code

42630-001/3 26301-201/4 41304-200/3 42213-201/9 20304-200/0 - 21003-200/9 26164-059/3 20304-202/4

20304-210/6

20630-002/4 26304-209/6 26304-210/7 26304-211/4 41307-201/4

figure 43

figure 44

1 2

5 6

On the kit you have some parts which are essential for install the chair independently of the suction configuration that you have in your chair. (fig. 43)

In this case we are showing two high suction.

Two high suction kit. (fig. 44)

Item 3 can be 1 or 2 depend on the suction configuration. Item description.

Item

1 2 3 4 5 6 7 8 9

figure 45

Quant

4 2 1 1 2 2 1 1 1 1

Kit Description

Cylindrical Head Allen Screw 1/4" x 2" Cylindrical Head Allen Screw 5/16" x 1.1/2" Separating Cup Regulating Valve Zinced Hexagonal Screw 3/16" x 3/8" Brass Round Head Plan Screw 5/32" x 3/8" Sewer Standard Box Cuspidor Thin Finishing Reflector Pipe Cover thin Cuspidor

Cuspidor Installation

Put the cuspidor on the soft superficies this will avoid some damage . After that, put the support and get through the hose inside the support. (fig. 45 and 46 Techno 200 / fig. 47 Versatil)

Code

27190-077/6 27190-024/2 42003-209/8 42300-200/7 27160-002/4 27120-019/7 42304-200/5 26302-012/1 26304-201/8 26560-013/7

figure 46

figure 48

figure 47

Fix the support in the system chair using the 4 allen screws ¼” x 2" (fig. 48) e key ¼” (fig. 49).

figure 49

Now fix the support on the chair using 2 allen screws 5/16 “ x 1. ½“ stainless steel and key 1/2”. (fig. 50 and 51)

figure 50

figure 51

Using the Allen screwdriwer 1/4” to fix (fig. 52 and 53).

figure 52

figure 54

figure 53

Techno Chair 200 Suction System

Remove the chair rear cover. (fig. 54 and 55)

figure 55

Take the hoses and cables to inside the chair . (fig. 56)

figure 56

figure 57

Take the hoses and cables to the rear place. (fig. 57 and 58)

figure 58

Return the hose to the chair front using the motor support.

(fig. 59 and 60)

figure 59

figure 60

Pull the hoses and the cables out the chair (fig. 61 and 62).Finally put the rear cover back .

figure 61

figure 63

figure 62

Following put the bowl , water tubes and cup tube.Put the finishing rubber in the reflector post so fit the reflector post.

(fig. 63, 64, 65 and 66)

figure 64

figure 65

figure 67

figure 66

PAD Connection Assistent Arm

You have to respect the common side, please connect the pad as are showing the figures. (fig. 67, 68, 69 and 70)

figure 68

Cuspidor PAD.

figure 69

figure 70

Connect the black and the white wires in the chair board , they will activate the Cuspidor Solenoids. (fig. 71 and 72)

figure 71

figure 72

figure 73

figure 75 figure 76

figure 74

Final Procedures

Illustrative pictures for representation of the layout and positioning of the components for built-in connections. (fig. 73 and 74)

Refer to schemes starting on page 24.

Fix the air regulator with a 3/16” hexagonal head screw using a fixed or a 5/16” box wrench.

(fig. 75) Fix the support of the debris

separator to the base of the chair with 2 3/16” hexagonal head screws, using a fixed or a 5/16” box wrench. (fig. 76)

figure 77

Install the motor cover and fix it with 2 Phillips screws, using a medium Phillips screwdriver. (fig. 77)

Install the cover(s) of the debris separator(s)

If the Unit has only one debris separator, use the rubber lid that is included in the kit to cover the extra hole on the motor cover.

1 12 3

figure 78

Techno Chair 200 - Delivery Unit

Inside the Box you will have (fig. 78) :

654

Item

1 2 3 4 5 6

Quant

4 1 1 1 1 1

Delivery Unit Description

Plastic Bottle Chip Blower Pedal Light Bulb Techno / hastflex 4 pins Manual Installation Kit Warranty Certificate

In the Delivery Unit carton (fig. 79) you can have the follow items.

figure 79

Item

A B* C* D E F G H I** J L

Quant

1 2 2 6 4 4 4 15 1 1 1

Kit Description

Four Ways ref AMP 626390/0 Male Terminal AMP 6,3 BA 626377-1 Female Terminal AMP 6,3-444334-1 Steel Plan Screw 3/16" x 1/2" Steel Head Star Screw 1/8" x 3/4" nickel-plated Bushing setting hose diam 3,3 Smooth Washer 3,7 x 8 x 0,5 chromiun plating Bushing setting hose diam. 1,6 Zinced Bar Bolt Label Reservoir of the Spray Green label Description Connecting Spray reservoir

* For Delivery Unit with Scaler or Fibre Optic ** Only EL Delivery Unit

Code

41951-003/0 41951-001/0 - 41902-012/0 26015-205/7 - 26047-106/9 26265-201/1 configuração 26164-059/3

Código

26083-009/1 26030-034/2 26030-003/6 27210-010/0 20289-007/9 20003-001/3 20560-014/3 20001-021/7 26164-016/6 26003-217/5 26003-222/5

figure 80

Delivery Unit Installation

Taking out the 6 3/16" x ½” Screws then remove the delivery unit cover. (fig. 80 and 81)

figure 81

figure 82

Remove the foams of the arms carefully. (fig. 82)

Get the hoses from the arm and get through them hole on the delivery unit. (fig. 83 and 84)

figure 83

figure 85

figure 84

Hang the delivery unit putting 3 sixth screws . (fig. 85 and 86)

figure 86

Put the gib and the little screw on the finishing washer. (fig. 87 and 88)

figure 87

figure 89

figure 88

With the 2 red cables 24V put on it the terminals. (fig. 89 and 90)

figure 90

figure 91

figure 92

Connection of the Delivery Unit Hoses and Cables

Optional Chip Blower

Connect the green hose identified by the letter “G” and the black hose identified by the letter “F” to the double valve.

Note: according to the configuration of the Delivery Unit, somehoses will not be connected.

Optional Chip Blower

Connect the black hose, identified by the letter “E” to the retention valve.

(fig. 92)

figure 93

figure 94

Connect the red hose identified by the letter “B” to the air distributor.

(fig. 93)

Connect the blue hose identified by the letter “A” to the syringe gray hose.

(fig. 94)

Optional Sodium Bicarbonate Jet

figure 95

Connect the red hose identified by the letter “C” to the Sodium Bicarbonate Jet valve.

(fig. 95)

figure 96

figure 97

Connect the red hose identified by the letter “J” to the arm lock valve.

(fig. 96)

Optional Flush

Connect the green hose identified by the letter “H” to the flush valve. (fig. 97)

Optional

figure 98

figure 99

Connect the transparent hose identified by the letter “I” to the peristaltic pump. (fig. 98)

Note: the Techno Delivery Unit was used; the same procedure to be adopted for the Flex and Hasteflex.models.

Connect those 2 red cables on the 2 white cables which are on the chair 24V. (fig. 99)

figure 100

On the another red cables extremity put the grey connector 4 holes. Put the wires on the 1

and the 3rd holes. (fig. 100)

Following connect this extremity on the distribution board inside the delivery unit. (fig. 101 and

102)

figure 101

figure 103

figure 102

Install the upper cover of the Delivery Unit and fix it with 6 Phillips screws, using a small Phillips screwdriver. (fig. 103)

1 2

Techno Chair 200 Reflector

figure 104

Item

1 2 3* 4 5 6

Quant

1 1 1 1 1 1

Reflector Description

Owner’s Manual Warranty Certificate Reflector Head (The Reflector dependes)* Reflector Arm Nickel Finishing washer Support Constraint Head

*Depend on the Reflector:

60350-200/3 – Versa Head 60350-201/8 – Reflex LD 60350-202/8 – Reflex

figure 105

The reflector box has the follows

items. (fig. 104 and 105)

Code

26760-016/4 26164-059/3

63350-200/9 20760-003/5 20450-003/3

Reflector Installation

figure 106

figure 108

Get through with the washer in the reflector post. (fig. 106 and

107)

figure 107

Put the post in the appropriated hole on the Cuspidor. (fig. 108)

figure 109

Release the arm. (fig. 109)

Put the gib for secure the Head and then down the plastic finishing washer. (fig. 110 and

111)

figure 110

figure 112

figure 111

Connect the power supply cables and the ground (depend on the Reflector). (fig. 112 and 113)

figure 113

Close the reflector tube correctly . (fig. 114)

figure 114

figure 115

Down the chair you have to connect the another extremity of the reflector and ground. They have to go inside the cuspidor support . They don´t have to be hanging or showing.

(fig. 115 and 116)

figure 116

figure 117

figure 118

Procedures for the Galla Chair

Assemble the left arm of the chair and fix it using a 3/16” Allen wrench.

(fig. 117)

Fix the backrest upholstery to the frame with 4 Phillips screws and 4 flat washers using a medium Phillips screwdriver. (fig. 118)

figure 119

figure 121

figure 120

figure 122

Fix the backrest cover with 4 Phillips screws and 4 fixing and finishing bushings using a medium Phillips screwdriver. (fig. 119)

Attach the 4 finishing plugs to the fixing points of the backrest cover. (fig .120)

Assemble the upholstery by fitting the rear locks of the upholstery in the supports located on the seat plate and push the upholstery in the direction indicated by the arrows (fig. 121). Make sure that the fixing screws located in the central part of the upholstery fitted in the openings of the seat reclining plate. Fix the upholstery with 2 knobs and tighten manually.

(fig. 122)

figure 123

figure 124

Procedures for the Croma Chair

Assemble the left arm of the chair and fix it with one Allen screw using a 3/16”. Allen wrench attach the screw finishing plug. (fig. 123)

Fix the backrest upholstery to the frame with 4 Phillips screws and 4 flat washers using a Phillips screwdriver. (fig. 124)

figure 125 figure 126

Attach the upholstery to the seat plate by fitting the fixing screws into the respective holes. (fig. 127)

figure 127

Fix the backrest cover with 4 Phillips screws and 4 fixing bushings using a medium Phillips screwdriver. (fig. 125)

Attach the 4 finishing plugs to the fixing points of the backrest cover. (fig. 126)

figure 128

Fix the upholstery with 2 knobs to the rear side and 2 knobs in the central part of the upholstery. Tighten manually. (fig. 128)

Chip Blower Drawing

Connection scheme for the Techno Delivery Unit to the Techno Unit distributor

TRANSPARENT PU TUBE

GRAY PU DUCT Ø1,6 FLAT SIDE

H A

E F

OUT TO ASSISTANT UNIT

OUT TO THE DELIVERY UNIT

GRAY PU DUCT Ø1,6 FLAT SIDE

GRAY DUCT Ø3,3 GROOVED SIDE

GRAY DUCT Ø1,6 GROOVED SIDE

BLUE PU TUBE Ø3,3

GRAY DUCT Ø1,6 GROOVED SIDE

GRAY PU DUCT Ø3,3 FLAT SIDE

BLACK DUCT Ø1,6 GROOVED SIDE

BLACK DUCT Ø1,6 FLAT SIDE

GRAY PU DUCT

Ø1,6 GROOVED SIDE

RED PU DUCT PU Ø1,6

BLUE PU TUBE Ø3,3

GREEN PU TUBE Ø1,6

BLUE PU TUBE Ø3,3

RED PU TUBE Ø1,6

GRAY PU TUBE Ø1,6

GRAY PU TUBE Ø3,3

BLACK PU DUCT Ø1,6 GROOVED SIDE

BLACK PU DUCT Ø1,6 FLAT SIDE

GREEN PU TUBE Ø1,6

5 6

GREEN PU TUBE Ø1,6

GRAY PU DUCT Ø1,6 GROOVED SIDE

GRAY PU DUCT Ø1,6 FLAT SIDE

CONTROL BOX

diagram 01

Hose Identification

40 PSI air for the Delivery Unit syringe

80 PSI air for the pilots

80 PSI air of the foot control for the Sodium Bicarbonate Jet

80 PSI air of the foot control return for the PDB

80 PSI air for the chip blower

80 PSI air for the water block

40 PSI water for the syringe

40 PSI liquid for the flush

40 PSI water for the peristaltic pump

Notes:

When the Unit has no syringe, nipples number 1 and 2 are substituted for plugs. When the delivery unit has no sodium bicarbonate jet, nipples number 3 and 4 are substituted for simple nipples Nipples number 5 and 6 should be connected only when the delivery unit has a chip blower. For the Techno Cart Delivery Uni only the “I” and “G” hoses are used.

Connection scheme of the Techno Delivery Unit with 1 Venturi aspirator and 1 Vac Plus aspirator

"A"

GRAY TUBE Ø3,3

GRAY PVC TUBE Ø7

BLUE PU TUBE Ø3,3

BLUE TUBE Ø 3,3

GRAY PU DUCT Ø3,3

GRAY PVC TUBE Ø 7

GRAY PU DUCT Ø 1,6

"D"

GRAY HOSE EVA Ø1/2”

GRAY PU DUCT Ø3,3

"C"

GRAY PU DUCT GRIS Ø1,6

GRAY HOSE EVA Ø 3/4”

GRAY PVC TUBE Ø7 RAYON

FLAT SIDE

FOOT CONTROL

FLAT SIDE

GROOVED SIDE

OUT TO TECHNO UNIT

diagram 02

Hose Identification

Point “A” - air from the supply line Point “B” - water from the supply line Point “C” - sewer inlet

80 PSI air - foot control

80 PSI air - Vac Plus aspirator

80 PSI air - supply line inlet

40 PSI air - valve

80 PSI air - Cuspidor distributor box

40 PSI air - Cuspidor distributor box

Hose for Venturi and Vac Plus aspirators

40 PSI air - Venturi ejector

Venturi sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Cuspidor foot control

80 PSI air - Chip blower

80 PSI air - Water block

Vac Plus sewer hose

80 PSI air - valve pilots

Note:

The “13” and “14” nipples are used only for Delivery Units with a chip blower.

Connection scheme for the Versatil Unit with 2 Venturi

"A"

GRAY PU TUBE Ø 3,3

GRAY PVC TUBE Ø7

RED PU TUBE Ø1,6

GRAY PVC TUBE Ø3,3

GRAY PVC TUBE Ø7

GRAY PVC TUBE Ø3,3

BLUE PU TUBE Ø 3,3

GRAY PU TUBE Ø 3,3

"D"

"C"

GRAY HOSE EVA Ø 3/4”

BLUE HOSE Ø10 X Ø7

GREEN TUBE Ø1,6

FOOT CONTROL

DELIVERY UNIT

CUSPIDOR

ASPIRATORS

diagram 03

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet

80 PSI air - foot control

80 PSI air - Unit valve

80 PSI air - supply line inlet

40 PSI air - Cuspidor

80 PSI air - Delivery Unit

40 PSI air - Delivery Unit

Hose for Venturi aspirators

40 PSI air - Venturi ejectors

Venturi sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Delivery Unit foot control

80 PSI air - Chip blower

80 PSI air - Water block

Water hose for syringe

Note:

The “13” and “14” nipples are used only for Delivery Units with a chip blower.

Connection scheme for Techno Unit with 1 Venturi aspirator

"A"

BLUE PU TUBE Ø 3,3

GRAY PU TUBE Ø 3,3

BLUE PU TUBE Ø 3,3

"C"

GRAY PU TUBE Ø 3,3

GRAY PVC TUBE Ø 7

GRAY PU TUBE 2 DUCTS Ø1,6 (FLAT SIDE)

FOOT CONTROL

BLUES HOSE Ø10 X Ø7

CUSPIDOR

ASPIRATOR

GRAY PVC TUBE Ø7

"D"

GRAY HOSE EVA Ø 3/4”

diagram 04

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet

80 PSI air - foot control

80 PSI air - Cuspidor distributor box

80 PSI air - supply line inlet

40 PSI air - valve

40 PSI air - Cuspidor distributor box

Hose for Venturi aspirators

40 PSI air - Venturi ejectors

Venturi sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Cuspidor foot control

80 PSI air - Chip blower

80 PSI air - Water block

80 PSI air - valve pilot

Note:

The “13” e “14” nipples are used only for Delivery Units with a chip blower.

Connection scheme for the Versatil Unit with 1 Venturi

BLUE PU TUBE Ø 3,3

"A"

diagram 05

GRAY PU TUBE Ø 3,3

GRAY PVC TUBE Ø7

GRAY PU TUBE Ø 3,3

GRAY PVC TUBE Ø 7

GRAY PU TUBE Ø 3,3

"D"

"C"

BLUE HOSE Ø10 X Ø7

GRAY HOSE EVA Ø 3/4”

GREEN TUBE Ø1,6

FOOT CONTROL

DELIVERY UNIT

PILOTS

CUSPIDOR

ASPIRATOR

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet

80 PSI air - foot control

80 PSI air - Cuspidor distributor box

80 PSI air - supply line inlet

40 PSI air - for the Cuspidor

80 PSI air - for the delivery unit

40 PSI air - for the delivery unit

Hose for Venturi aspirators

60 PSI air for Venturi ejector

Venturi sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Delivery unit foot control

80 PSI air - Chip blower

80 PSI air - Water block

Water hose for syringe

Note:

The “13” e “14” nipples are used only for Delivery Units with a chip blower

Connection scheme for the Techno Unit with 1 Venturi and 1 High Suction

"A"

GRAY PU TUBE Ø 1,6

GRAY PU TUBE Ø 3,3

BLUE PU TUBE Ø 3,3

GRAY PU TUBE Ø 3,3

BLUE PU TUBE Ø 3,3

GRAY PU TUBE Ø 3,3

GRAY PVC TUBE Ø 7

GRAY PU TUBE Ø 1,6

GRAY HOSE EVA Ø 1/2”

"C"

GRAY HOSE EVA Ø 3/4”

FOOT CONTROL

"F"

BLUE HOSE Ø 10 X Ø 7

CUSPIDOR

GRAY PVC TUBE Ø 7

"D"

GRAY HOSE EVA Ø 3/4”

diagram 06

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet Point “F” - High power suction

80 PSI air - foot control

80 PSI air - Cuspidor distributor box

80 PSI air - supply line inlet

40 PSI air - valve

80 PSI air - valve pilot

40 PSI air - Cuspidor distributor box

Hose for Venturi and Vac Plus aspirators

40 PSI air - Venturi ejector

Venturi sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Cuspidor foot control

80 PSI air - Chip blower

80 PSI air - Water block

Vac Plus sewer hose

40 PSI air - electropneumatic valve

80 PSI air - electropneumatic valve pilot

Note

The “13” e “14” are used only for Delivery Units with a Chip blower.

Connection scheme for Versatil Unit with 1 Venturi and 1 High Suction

BLUE PU TUBE Ø 3,3

"C"

BLUE PU TUBE Ø 3,3

GRAY PU TUBE Ø 1,6

GRAY PVC TUBE Ø 7

GRAY PU TUBE Ø 3,3

GRAY HOSE EVA Ø 1/2”

GRAY PU TUBE Ø 3/4”

"F"

GREEN TUBE Ø 1,6

FOOT CONTROL

DELIVERY UNIT

"A"

GRAY PU TUBE Ø 3,3

PILOTS

CUSPIDOR

GRAY PVC TUBE Ø 7

"D"

diagram 07

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet Point “F” - High power suction

80 PSI air - foot control

80 PSI air - Cuspidor distributor box

80 PSI air - supply line inlet

40 PSI air - for the Cuspidor

80 PSI air - for the Delivery Unit

40 PSI air - for the Delivery Unit

Hose for Venturi aspirators/High Power

60 PSI air - Venturi ejector

GRAY HOSE EVA Ø 3/4”

Venturi sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Cuspidor foot control

80 PSI air - Chip blower

80 PSI air - Water block

Hose of water for syringe

High Power sewer hose

ASPIRATORS

Note

The “13” e “14” nipples are used only for Delivery Units with a chip blower..

Connection scheme for Versatil Unit with 1 Venturi and 2 High Suction

GRAY PU TUBE Ø 1,6

BLUE PU TUBE Ø 3,3

"A"

"D"

GRAY PU TUBE Ø 3,3

GRAY HOSE EVA Ø 1/2”

GRAY HOSE EVA Ø 3/4”

GRAY PU TUBE Ø 3,3

"C"

"F"

GRAY HOSE EVA Ø 1/2”

GRAY PVC TUBE Ø 7

GRAY HOSE EVA Ø 3/4”

0XØ7

BLUE HOSE Ø 1

13 14

FOOT CONTROL

CUSPIDOR

diagram 08

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet Point “F” - High power suction

80 PSI air - foot control

80 PSI air - Cuspidor distributor box

80 PSI air - supply line inlet

40 PSI air - Cuspidor distributor box

40 PSI air - Electropneumatic valve

80 PSI air - Electropneumatic valve pilot

High power blood suction

High power saliva suction

Aspirators sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Cuspidor distr.box foot control

80 PSI air - Chip Blower

Note

The “13” e “14” nipples are used only for Delivery Units with a chip blower..

Connection scheme for the Versatil Unit with 2 High Power

BLUE PU TUBE Ø 3,3

"C"

GRAY PU TUBE Ø 3,3

GRAY PU TUBE Ø 1,6

BLUE HOSE Ø 10 X Ø 7

"A"

GRAY PU TUBE Ø 3,3

FOOT CONTROL

DELIVERY UNIT

GRAY HOSE EVA Ø 1/2”

GRAY HOSE EVA Ø 3/4”

"D"

diagram 09

Hose identification

Point “A” - air from the supply line Point “C” - water from the supplyline Point “D” - sewer inlet Point “F” - High power suction

"F"

GREEN TUBE Ø 1,6

CUSPIDOR

80 PSI air - foot control

80 PSI air - for Delivery Unit

80 PSI air - supply line inlet

40 PSI air - for the Cuspidor

40 PSI air - for Delivery Unit

Syringe water hose

High power blood suction

High power saliva suction

Aspirators sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Delivery Unit foot control

80 PSI air - Chip Blower

Note

The “13” e “14” nipples are used only for the Delivery Units with a chip blower.

Connection scheme for the Techno Unit with 1 Vac Plus and l High Suction

"A"

GRAY PU TUBE Ø 1,6

GRAY PU TUBE Ø 3,3

BLUE PU TUBE Ø 3,3

GRAY PU TUBE Ø 3,3

GRAY PU TUBE Ø 3/4”

GRAY HOSE EVA Ø 1/2”

"C"

"F"

FOOT CONTROL

BLUEHOSEØ10XØ7

GRAY HOSE EVA Ø 1/2”

GRAY PU TUBE Ø 1,6

CUSPIDOR

GRAY PU TUBE Ø 3/4”

"D"

GRAY HOSE EVA Ø 3/4”

diagram 10

Hose identification

Point “A” - air from the supplyline Point “C” - water from the supply line Point “D” - sewer inlet Point “F” - High power suction

80 PSI air - foot control

80 PSI air - Cuspidor distributor box

80 PSI air - supply line inlet

40 PSI air - Cuspidor distributor box

80 PSI air - Vac Plus ejector

High Power sewer hose

Vac Plus/High Power aspirators hose

80 PSI air - pilot

Vac Plus sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Cuspidor foot control

80 PSI air - Chip Blower

80 PSI air - Water block

40 PSI air - Electropneumatic valve

80 PSI air - Electropneumatic valve pilot

Note

The “13” e “14” nipples are used only for Delivery Units with a chip blower..

Connection scheme for the Versatil Unit with l Vac Plus and 1 High Suction

BLUE PU TUBE Ø 3,3

"A"

diagram 11

GRAY PU TUBE Ø 3,3

GRAY PU TUBE Ø 3/4”

GRAY PU TUBE Ø 3,3

"D"

GRAY PU TUBE Ø 3,3

GRAY PU TUBE Ø 1,6

GRAY HOSE EVA Ø 1/2”

GRAY PU TUBE Ø 3/4”

"C"

GRAY HOSE EVA Ø 1/2”

"F"

GRAY PU TUBE Ø 1,6

GRAY HOSE EVA Ø 3/4”

FOOT CONTROL

DELIVERY UNIT

ASPIRATOR

PILOTS

CUSPIDOR

Hose identification

Point “A” - air from the supply line Point “C” - water from the supply line Point “D” - sewer inlet Point “F” - High Power suction

80 PSI air - foot control

80 PSI air - valve and Vac Plus ejector

80 PSI air - supply line inlet

40 PSI air - for Cuspidor

80 PSI air - for Delivery Unit

40 PSI air - for Delivery Unit

Vac Plus/High suction aspirators hose

Pilot air return

Vac Plus sewer hose

Bowl sewer hose

Water inlet hose

80 PSI air - Delivery Unit foot control

80 PSI air - Chip Blower

80 PSI air - Water block

High suction sewer hose

Note:

The “13” e “14” nipples are used only for Delivery Units with a chip blower.

Suction System

Venturi System

High Suction System

Vac Plus System

MARTINS DESIGN - DEZ/2006

DABIATLANTE Galla200, Croma200 Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual