21029 Itasca., CHATSWORTH, CALIFORNIA 91311 USA www.cyron.com
Media Highlighter® IR Controller
HTW202
Thank you for purchasing CYRON HTW202 Media Highlighter IR controller. Please follow all the steps to assure proper
installation and optimum usage of this device. It is a good idea to read through the instructions once before you start your project.
Operation:
Operation of HTW202 is simple. Color buttons on the remote correlate to the
colors displayed. Four different color shows STROBE, STEP, FADE, and COLOR
automatically change light colors and patterns with pre-programmed
sequences.
1. The speed of light can be changed using the Up and Down buttons. There
are 5 different speeds available in STROBE, STEP, FADE, and COLOR modes.
Brightness can also be adjusted in 5 steps. This can only be done when
displaying solid colors.
2. There are two buttons under R & G for enabling Soft Mode. First, ensure the
light is off. Press the Off button 5 times (the light should turn on). Next press the
orange button to turn on Soft Mode* or the green button to turn off Soft Mode.
Simply turn off the light to save settings.
For Advanced Users Only!
3. Wiring sequences can be altered for products in which the lighting sequence
doesn’t match the remote, (the BRG sequence is selected by default.) First,
ensure the light is off. Next press the off button 5 times (the light should turn on).
Then press Yellow for RGB, Blue for GRB or Pink for BRG (buttons available on last
row). Lastly turn the light off to save.
Specifications:
Working temperature: -20 to 60°C
Supply voltage: 12-24VDC
Controller Dim: L62xW35xH23mm
Net weight: 50g
Outputs: 2 parallel outputs
Electrical Connection: Common anode
Output current: 3x3A peak both outputs combined
* Soft Mode: The one second fade between commands.
Electrical Connections:
Loading...