Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
It is the responsibility of the facility owner and/or owner of the equipment to instruct users on
proper operation of the equipment and review all labels.
! WARNING: Serious injury could occur if these safety precautions are not observed:
USER SAFETY PRECAUTIONS
• Obtain a medical exam prior to beginning an exercise program.
• Read and understand warning labels and user manual prior to exercising. Obtain
instruction prior to use.
• Keep body and clothing free from and clear of all moving parts.
• Inspect machine prior to use. DO NOT use if it appears damaged or inoperable.
• DO NOT attempt to fix a broken or jammed machine. Notify floor staff.
• Use the machine only for the intended use. DO NOT modify the machine.
• Be sure that the weight pin is completely inserted. Use only the pin provided by the
manufacturer. If unsure seek assistance.
• Never pin the weights in an elevated position. DO NOT use the machine if found in this
condition. See assistance from floor staff.
• Children must not be allowed near these machines. Teenagers must be supervised.
• DO NOT use if guards are missing or damaged.
• DO NOT use dumbbells or other incremental weights, except those provided by the
manufacturer.
• Inspect all cables and belts and connections prior to use. DO NOT use if any components
are worn, frayed or damaged.
• DO NOT remove any labeling from equipment. Replace any damaged labels.
• Stop exercising if you feel faint, dizzy or experience pain at any time while exercising and
consult your physician.
Page 1-1
Cybex Modular Owner’s Manual
Facility Safety Precautions
• Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
• Securely anchor each machine to the floor using the anchor holes provided in each
machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult
with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8” grade 2
bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors.
Shim any leg or frame not in contact with surface using flat washers.
• Make sure that each machine is set up and operated on a solid level surface. Do not
install equipment on an uneven surface.
• Make sure that all users are properly trained on how to use the equipment.
• Make sure there is enough room for safe access and operation of the equipment.
• Perform regular maintenance checks on the equipment. Also pay close attention to all
areas most susceptible to wear, including (but not limited to) cables, pulleys, belts and
grips.
• Immediately replace worn or damaged components. If unable to immediately replace worn
or damaged components then remove from service until the repair is made.
• Use only Cybex supplied components to maintain/repair the equipment.
• Keep a repair log of all maintenance activities.
• Inspect all cables and belts and connections prior to use. DO NOT use if any components
are worn, frayed, or damaged.
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed.
Warning/Caution Decals
Warning decals indicate a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in
minor or moderate injury.
The warning and caution decals are shown on the following page. The diagrams following the
decals show where each decal is located.
Page 1-2
Cybex Modular Owner’s Manual
C
A
B
Page 1-3
.
10. DO NOT use if guards are missing
or damaged.
11. DO NOT use dumbbells or other
incremental weights, except those
provided by the manufacturer.
12. Inspect all cables and belts and
connections prior to use. DO NOT use
if any components are worn, frayed,
or damaged
4800-381 C
13. DO NOT REMOVE THIS LABEL.
REPLACE IF DAMAGED.
Cybex Modular Owner’s Manual
F
D
6. Use the machine only for the
intended use. DO NOT modify the
machine.
7. Be sure that the weight pin is
completely inserted. Use only the pin
provided by the manufacturer. If unsure
seek assistance.
2. Read and understand warning
labels and user manual prior to
exercising. Obtain instruction
1. Obtain a medical exam prior to
beginning an exercise program.
prior to use.
WARNING
SERIOUS INJURY
9. Children must not be allowed near
this machine. Teenagers must be
8. Never pin the weights in an elevated
position. DO NOT use the machine if
found in this condition. Seek assistance
4. Inspect machine prior to use. DO
3. Keep body and clothing free from
NOT use if it appears damaged or
and clear of all moving parts.
COULD OCCUR IF
THESE PRECAUTIONS
ARE NOT OBSERVED
supervised.
from floor staff.
inoperable.
5. DO NOT attempt to fix a broken or
jammed machine. Notify floor staff.
CAUTION
G
Keep away from moving
parts. Failure to do so could
result in personal injury.
8500-026 A
E
CAUTION
350 LBS MAXIMUM LOAD
DO NOT EXCEED MAXIMUM CROSS TUBE LOAD.
PERSONAL INJURY MAY RESULT.
Page 1-4
5649-329 A
Cybex Modular Owner’s Manual
Lat Pulldown - 5601
B
A
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
D
Page 1-5
Cybex Modular Owner’s Manual
Tricep Pressdown - 5603
D
B
A
B
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-6
Cybex Modular Owner’s Manual
Cable Column - 5605/5315/5316/5633
5605 - Modular without Booms
5315 - Free Standing without Booms
5316 - Free Standing with Booms
5633 - Modular with Booms
D
A
B
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-7
Cybex Modular Owner’s Manual
Assist Chin Up/Dip - 5611
B
D
5345 - Single Station Chin-Up/Dip
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
A
Page 1-8
Cybex Modular Owner’s Manual
Low Row - 5651 and 5302
B
A
D
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-9
Cybex Modular Owner’s Manual
Shoulder Press - 5639
D
B
A
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-10
Cybex Modular Owner’s Manual
Chest Press - 5640
C
A
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
C. Warning Decal.................... 4605-381
B
Page 1-11
Cybex Modular Owner’s Manual
Tricep Extension - 5641
D
A
B
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-12
Cybex Modular Owner’s Manual
Arm Curl - 5644
B
D
A
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-13
Cybex Modular Owner’s Manual
Pressing Station - 5647 and 5306
D
B
A
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
Page 1-14
Cybex Modular Owner’s Manual
Cable Crossover - 5311, 5648, 5649 and 5650
D
E
B
F
A
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
E. Caution Decal .................... 5649-329
F.Caution Decal .................... 8500-025
Page 1-15
Cybex Modular Owner’s Manual
Seated Leg Press - 5652 and 5322
D
B
A
F
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
F.Caution Decal .................... 8500-025
Page 1-16
Cybex Modular Owner’s Manual
Leg Extension/Leg Curl - 5653 and 5307
Product No. 5307 - Freestanding
F
G
Product No. 5653 - Modular
D
B
F
A
G
F
DESCRIPTION PART NO.
A. Warning Decal ................... 02521
B. Caution Decal .................... 4000Y316
D. Warning Decal.................... 4800-381
F.Caution Decal .................... 8500-025
G. Caution Decal .................... 8500-026
Page 1-17
F
Cybex Modular Owner’s Manual
Regular Maintenance Activities
Preventative maintenance activities must be performed to maintain normal operation of your
equipment. Keeping a log sheet of all maintenance actions will assist you in staying current
with all preventative maintenance activities. The preventative maintenance actions are
described in detail in Chapter 5. Briefly, they include:
Daily
1. Clean upholstery.
Weekly
1. Inspect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables for damage or wear (see Chapter 5). Immediately discontinue use if a
cable is worn or damaged.
3. Check for worn handles, worn snap links, and worn warning labeling. Replace all worn
parts immediately.
4. Inspect weight stacks for proper alignment and operation. Correct all improper alignment
and operation issues immediately.
5. Lubricate guide rods using automotive engine oil only.
Yearly
1. Replace all cables at least annually.
As Required
1. Inspect grips and replace as necessary.
Using Proper Form
Before working out, read and understand the exercises located on the placard and in
Chapter 2.
Page 1-18
Cybex Modular Owner’s Manual
2 - Exercise
5652/5322 - Modular Seated Leg Press
1. Select appropriate resistance.
2. Adjust seat mechanism to desired starting
position.
3. Located feet securely on foot plates and
position yourself squarely in seat.
4. Lift/lower resistance with smooth, controlled
movements.
NOTE: Do not hyperextend (lock) knees
during movement.
Start Position
NOTE: The appropriate starting position
will allow your feet to be securely
located on the foot plates, legs
to be placed at approximately 90
degrees and your back squarely
positioned against back pad.
NOTE: Maintain proper back positioning
during exercise to reduce chance of
back injury.
MUSCLES TRAINED
Stop Position
Primary - Pectoralis Major
Secondary - Anterior Deltoid, Triceps
(Basic Press) and Biceps
(Advanced Press)
Page 2-1
Cybex Modular Owner’s Manual
This page intentionally left blank
Page 2-2
Cybex Modular Owner’s Manual
5653/5307 - Modular Leg Extension/Leg Curl
1. Select appropriate resistance.
2. Adjust back pad so that center of knees align
with machine’s axis of rotation.
3. Pull detent pin on input arm, lowering arm
into one of the two start positions.
4. Pull detent pin and adjust height of lower leg
pads to a height comfortable above ankles.
5. Lift/lower resistance with smooth, controlled
movements without resting.
MUSCLES TRAINED
Primary - Pectoralis Major
Start Position
Stop Position
Start Position
Stop Position
Secondary - Anterior Deltoid, Triceps
(Basic Press) and Biceps
(Advanced Press)
Page 2-3
Cybex Modular Owner’s Manual
This page intentionally left blank
Page 2-4
Cybex Modular Owner’s Manual
5651/5302 - Modular Low Row
1. Select appropriate resistance.
2. Grasp handle and position feet securely on
foot plate.
3. Position yourself comfortably on seat and
maintain a slight bend in the knees.
4. Throughout the exercise keep back straight
and upright.
5. Lift/lower resistance with smooth, controlled
movements.
NOTE: For optimum performance and safety,
avoid excessive bending of spine
during exercise.
Start Position
MUSCLES TRAINED
Primary - Biceps and Latissimus Dorsi
Secondary - Erector Spinae
Stop Position
Page 2-5
Cybex Modular Owner’s Manual
This page intentionally left blank
Page 2-6
Loading...
+ 160 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.