Power Supplies
8
PSS Series
January 2009
PSS Series
PSS Supplies
Product Description
Eaton’s PSS Series of power supplies is
designed to work in a variety of applications, including the power supply to
IT. line of power control products.
the
They also work in most control applications that require 24V DC. All of the
PSS power supplies are designed to
provide the highest “outrush” current
in the industry for units of their size.
It is also the only line to provide 110 –
480V AC input voltage down to the
smallest current units.
Application Description
The PSS line of power supplies is
specifically designed to work with the
S801, S811, MV811 and
mechanical devices. They can also
serve in a variety of other applications,
including support of sensors, operator
interfaces, PLCs, communication networks, heaters and lights and in many
other industrial applications where
24V DC power supplies are required.
With the widest operating temperature
range in the industry, rugged design
and a long list of advanced features,
they can be applied in a very wide range
of applications.
The higher input voltage ranges are
designed to allow users to eliminate
the need for a control power transformer in the enclosure or cabinet,
thus saving space, wiring and money.
IT. electro-
Features
Wide range voltage input
■
(110 – 480V AC operating).
High current outrush capability
■
in all units.
Semiconductor F47 approved.
■
■
Long ride-through capability
designed in.
■
Wide operating temperature range.
Power supplies can be used in
■
parallel (6.5A and greater).
■
Multiple 24V DC terminals for
easy wiring.
■
DIN-rail and panel mount available
in most units.
■
Removable terminal connections.
■
IP20 fingerproof design.
Larger units have —
■
❑
Active power factor correction
❑
Adjustable output voltages
❑
Fault contacts
Analog outputs
❑
Benefits
24V DC control enhances personnel
■
and equipment safety.
IP20 design improves personnel
■
safety.
Removable terminal connectors
■
make installation and repair quick
and easy.
■
Wide operating temperature range
allows for installation in most areas
where standard control products
can be installed today.
High current outrush capability
■
allows use of smaller power
supplies in many applications
and ensures stable output during
high power demand cycles.
Due to long ride-through time, the
■
Power Supply can maintain the
control power system during brown
out and black out conditions.
Standards and Certifications
UL Listed 508.
■
■ CSA Certified.
■ CE Marked.
■ F47 Certified.
For more information visit: www.eaton.com
CA00912001E
January 2009
Power Supplies
PSS Series
9
Catalog Number Selection
Table 4. PSS Catalog Numbering System
P S S 5 5 A
Model
PSS = Power Supply Switcher
Wattage Rating
10 = 10 Watts
25 = 25 Watts
55 = 55 Watts
160 = 160 Watts
300 = 300 Watts
600 = 600 Watts
1000 = 1000 Watts
Product Selection
Table 5. Power Supply Product Selection
Steady State
Current (Amps)
.4 10W 110 – 240
1.0 25W 110 – 240
2.3 55W 110 – 240
6.5 160W 110 – 240
12.5 300W 90 – 264
25.0 600W 380 – 480 PSS600C 700.00
40.0 1000W 380 – 480 PSS1000C 1290.00
Steady State
Wattage
Input
Voltage
380 – 480
380 – 480
190 – 264
360 – 480
480 – 600
380 – 480
380 – 480
Nominal Input Voltage Rating
A = 115V AC
B = 230V AC
C = 360 – 480V AC
(3-phase)
D = 480 – 600V AC
E = 110 – 240V AC
F = 380 – 480V AC
Catalog
Number
PSS10E
PSS10F
PSS25E
PSS25F
PSS55A
PSS55B
PSS55C
PSS55D
PSS160E
PSS160C
PSS300E
PSS300C
Price
U.S. $
99.50
121.00
125.00
150.00
233.00
233.00
279.00
580.00
342.00
399.00
471.00
580.00
Accessories
DIN-Rail Mounting Kit
Table 7. Kits
Description Catalog
Number
DIN-Rail Mounting Kit PSSDIN 22.30
Price
U.S. $
Table 6. PSS Sizing Chart
Frame
Size
27 mm A N/A .83A .83A 30 mS
45 mm B 00, 0 .13A 3.30A 50 mS
54 mm C 1 .15A 3.80A 50 mS
76 mm D 2 .21A 5.40A 65 mS
105 mm E 3, 4 .23A 5.80A 85 mS
140 mm F 5 .54A 8.30A 250 mS
IEC
Size
NEMA
Size
Steady State
Current
Inrush
Amps Durahon
CA00912001E For more information visit: www.eaton.com
Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . . DT-1
10
Power Supplies
PSS Series
Technical Data and Specifications
Table 8. Power Supply Specifications
Capacity PSS10E PSS10F PSS25E PSS25F PSS55A PSS55B PSS55C PSS55D
10W 10W 25W 25W 55W 55W 55W 55W
Input
Voltage 110 to 240V AC 380 to 480V AC 110 to 240V AC 380 to 480V AC 115V AC 230V AC 380 to 480V AC
Input Current
(RMS)
Frequency 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz
Voltage Range ± 10% ± 10% ± 10% ± 10% ± 15% ± 15% ± 10% ± 15%
Inrush Current 25A 25A 35A 35A 16A 32A 15A 15A
Overvoltage 330V AC 550V AC 330V AC 550V AC Varistor Varistor Varistor Varistor
Internal Input Fuse T2A @ 250V T2A @ 250V T4A @ 250V T2A @ 250V T2A @ 250V T2A @ 250V 3 x T2A @ 250V —
External Fusing Not Required 2A 250V AC Slow Blow 3 x 1A 600V AC
Output
Voltage Nominal 24V DC 24V DC 24V DC 24V DC 24V DC 24V DC 24V DC 24V DC
Voltage Regulation ±10% ±10% ±10% ±10% ±3.5% ±3.5% ±3.5% ±3.5%
Current Nominal .4A .4A 1.0A 1.0A 2.3A 2.3A 2.3A 2.3A
Voltage Adj. Range None None None None None None None None
Current Surge 1A 1A 6.8A 6.8A 10A 10A 10A 10A
Current Surge
Time
Surge Cycle Time 10 sec 10 sec 10 sec 10 sec
Hold Up Time 100 mS 100 mS 100 mS 100 mS 70 mS 70 mS 24 mS 30 mS
Max. Load
Capacitance
Switching
Frequency
Efficiency @
Max. Load
Output Ripple ±1% ±1% ±1% ±1% ±1% ±1% ±1% ±1%
.19A .1A .45A .17A .9A .54A .20A/Phase .07A/Phase
35 mS 35 mS 85 mS 85 mS 180 mS 180 mS 180 mS 180 mS
10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF
60k Hz 60k Hz 100k Hz 100k Hz 100k Hz 100k Hz 100k Hz 61k Hz
80% 75% 80% 80% 80% 80% 80% 85%
3-Phase
480 to 600V AC
3-Phase
Slow Blow
January 2009
For more information visit: www.eaton.com CA00912001E
Power Supplies
PSS Series
January 2009
Table 8. Power Supply Specifications (Continued)
Capacity PSS10E PSS10F PSS25E PSS25F PSS55A PSS55B PSS55C PSS55D
10W 10W 25W 25W 55W 55W 55W 55W
Protection
Short Circuit Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart
Over Voltage No No No No No No No No
Under Voltage No No No No No No No No
Over
Temperature
Over Current 0.8A typical
@ 24V for
>100 mS
0.8A typical
@ 24V for
>160 mS
6.8 A typical
@ 24V for
>160 mS
Galvanic Isolation
Input to Output 1.5 kV 2 kV 1.5 kV 2 kV 3 kV 3 kV 3 kV 4 kV
Input/Output to
Rail
Input to Ground 1.5 kV 2 kV 1.5 kV 2 kV 1.5 kV 1.5 kV 1.5 kV 2.0 kV
Output to
Ground
1.5 kV 2 kV 1.5 kV 2 kV 3 kV 3 kV 3 kV 4 kV
200V 200V 200V 200V 200V 200V 200V 250V
Special Features
Cooling Convection Convection Convection Convection Convection Convection Convection Convection
Load Sharing None None None None None None None None
Redundancy None None None None None None None None
Analog Outputs None None None None None None None None
Fault Relay None None None None None None None None
Wire Size
Input 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG
Output 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG 20 – 14 AWG
I/O None None None None None None None None
Indications
Indicators Green LED (DC on)
Physical Data
Dimensions
Length x Width
x Depth in
inches (mm)
Weight (kg) .57 (.26) .64 (.29) .73 (.33) .81 (.37) 1.06 (.48) 1.06 (.48) 1.17 (.53) 2.45 (1.1)
Mounting and
Recommended
Clearance
4.49 x 1.97 x 4.49
(114 x 50 x 114)
TS35 rail or chassis; leave 4 in. (10 cm) free space on venting sides. TS35 Rail (with optional PSSDIN Kit) or Chassis;
4.49 x 1.97 x 4.49
(114 x 50 x 114)
4.49 x 1.97 x 4.49
(114 x 50 x 114)
Environmental Performance
Storage
Temperature
Operating
Temperature
Storage
Humidity
Operating
Humidity
-25 to 80°C -25 to 80°C -25 to 80C -25 to 80C -40 to 85°C -40 to 85°C -40 to 85°C -40 to 85°C
-5 to 50°C -5 to 50°C -5 to 50°C -5 to 50°C -25 to 50°C -25 to 50°C -25 to 50°C -25 to 50°C
5 to 95% 5 to 95% 5 to 95% 5 to 95% 5 to 95% 5 to 95% 5 to 95% 5 to 95%
<95% RH noncondensing
<95% RH noncondensing
<95% RH noncondensing
Approvals/Certifications
UL, IEC, CSA UL, IEC, CSA UL, IEC, CSA UL, IEC, CSA cULus 1950 Recognized, cULus 508 Listed, CE cCSAus
None. Software in Micro Controller
6.8A typical
@ 24V for
>160 mS
4.49 x 1.97 x 4.49
(114 x 50 x 114)
<95% RH noncondensing
10A typical
@ 24V for
>300 mS
2.09 x 3.86 x 5.59
(53 x 98 x 142)
Leave 4 in. (10 cm) free space on venting sides.
20 to 85% noncondensing
10A typical
@ 24V for
>300 mS
2.09 x 3.86 x 5.59
(53 x 98 x 142)
20 to 85% noncondensing
10A typical
@ 24V for
>300 mS
2.32 x 4.21 x 6.73
(59 x 107 x 171)
20 to 85% noncondensing
10A typical
24V for
>300 mS
2.32 x 6.19 x 6
(59 x 157 x 154)
—
20 to 85% noncondensing
11
CA00912001E For more information visit: www.eaton.com
12
Power Supplies
PSS Series
PSS160E PSS300E
Table 8. Power Supply Specifications (Continued)
Capacity PSS160E PSS160C PSS300E PSS300C PSS600C PSS1000C
160W 160W 300W 300W 600W 1000W
Input
Voltage 115 to 230V AC 380 to 480V AC
Input Current
(RMS)
Frequency 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz 47 – 63 Hz
Voltage Range ± 10% ± 10% ± 10% ± 10% ± 10% ± 10%
Inrush Current 16/32A 5.7A 30A 40A 40A 40A
Over Voltage Varistor Varistor Varistor Varistor Varistor Varistor
Internal Input Fuse T6.3A @ 250V 3 x T2A @ 500V T5A @ 250V No No No
External Fusing Not Required
2.3A/1.4A .43A/Phase 3.3A/1.65A .75A/Phase 1.4A/Phase 1.9A/Phase
3A 250V AC
Slow Blow
3-Phase
Not Required
2A 480V AC
Slow Blow
Output
Voltage Nominal 24V DC 24V DC 24V DC 24V DC 24V DC 24V DC
Voltage Regulation ±3.5% ±3.5% ±6% ±5% ±6% ±6%
Current Nominal 6.5A 6.5A 12.5A 12.5A 25A 40A
Voltage Adj. Range 22.5 to 28.5V DC 22.5 to 28.5V DC 23 to 28V DC 23 to 28V DC 23 to 28V DC 23 to 28V DC
Current Surge 13A 20A 18A 25A 50A 80A
Current Surge Time 1 sec 1 sec 1 sec 1 sec 1 sec 1 sec
Surge Cycle Time 10 sec 10 sec 10 sec 60 sec 60 sec 60 sec
Hold Up Time 50 mS 15 mS 30 mS 25 mS @ 480V AC 12 mS >14 mS
Max. Load
Capacitance
Switching
Frequency
Efficiency @
Max. Load
Output Ripple ±1% ±1% ±.1% ±.1% ±.1% ±.1%
10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF 10,000 µF
65k Hz 100k Hz 100k Hz 100k Hz 65k Hz 65k Hz
85% 83% 80% 83% 87% 90%
115 to 230V AC 380 to 480V AC
Not Required
6A 250V AC
Slow Blow
3-Phase
3 x T2A @ 480V AC
Slow Blow
380 to 480V AC
3-Phase
Required 3 x 6A @ 480V AC Slow Blow
January 2009
380 to 480V AC
3-Phase
For more information visit: www.eaton.com CA00912001E
Power Supplies
PSS Series
January 2009
Table 8. Power Supply Specifications (Continued)
Capacity PSS160E PSS160C PSS300E PSS300C PSS600C PSS1000C
160W 160W 300W 300W 600W 1000W
Protection
Short Circuit Auto restart Auto restart Auto restart Auto restart Auto restart Auto restart
Over Voltage No Yes Yes Yes V
Under Voltage No Yes Yes Yes V
Over Temperature None. Software in Micro Controller V
Over Current 13A typical @ 24V
for >1 sec
13A typical @ 24V
for >1 sec
20A typical @ 24V
for >1 sec
heatsink temp. is greater than 100°C
out
20A typical @ 24V
for >1 sec
Galvanic Isolation
Input to Output 3 kV 3 kV 3 kV 3 kV 3 kV AC 3 kV AC
Input/Output to Rail 3 kV 3 kV 3 kV 3 kV 1.5 kV AC 1.5 kV AC
Input to Ground 1.5 kV 1.5 kV 1.5 kV 1.5 kV 1.5 kV AC 1.5 kV AC
Output to Ground 500V 500V 500V 500V 500V AC 500V AC
Special Features
Cooling Convection Convection Fan cooled Convection Fan cooled Fan cooled
Load Sharing Maximum 2 units Maximum 2 units Maximum 3 units
Redundancy Maximum 2 units Maximum 2 units Maximum 2 units Maximum 2 units Maximum 2 units Maximum 2 units
Analog Outputs None None VDC Out = 3 x V
Fault Relay Form C, 125V AC
and 30V DC @ 1A
rating
Form C, 125V AC
and 30V DC @ 1A
rating
(active)
analog, T = 10 x V
analog, IOUT = 10 x
V analog
Form C contacts (1A
@ 30V DC or 30V AC)
Maximum 2 units Maximum 2 units Maximum 2 units
None VDC OUT = 3 x V analog, T = 10 x V analog,
Form C contacts (1A
@ 30V DC or 30V AC)
Wire Size
Input 26 – 12 AWG 26 – 12 AWG 22 – 12 AWG 22 – 12 AWG 22 – 12 AWG 22 – 12 AWG
Output 26 – 12 AWG 26 – 12 AWG 22 – 6 AWG 22 – 6 AWG 22 – 6 AWG 22 – 6 AWG
I/O 26 – 12 AWG 26 – 12 AWG 22 – 12 AWG
(.08 – 2.5 mm
2
)
22 – 12 AWG
(.08 – 2.5 mm2)
Indications
Indicators Green LED (DC on)
Physical Data
Dimensions
Length x Width x
Depth in Inches
(mm)
Weight Lbs. (kg) 1.94 (.88) 2.2 (.99) 2.6 (1.18) 3.0 (1.4) 6.6 (3) 8.35 (3.8)
Mounting and
Recommended
Clearance
5.0 x 2.2 x 6.8
(127 x 57 x 175)
TS35 Rail with optional PSSDIN Kit or Chassis (hardware included); leave 4 in. (10 cm) free space on venting sides.
5.44 x 2.3 x 7
(138.2 x 58.4 x 177.8)
4.1 x 9.53 x 6.1
(104 x 242 x 155)
6.25 x 3.16 x 6.35
(159 x 80 x 161)
Environmental Performance
Storage
Temperature
Operating
Temperature
Storage Humidity 5 to 95% 5 to 95% 4 to 95% 4 to 95% 5 to 95% 5 to 95%
Operating Humidity 20 to 85% non-
-40 to +85°C -40 to +85°C -40 to +85°C -40 to +85°C -40 to +85°C -40 to +85°C
-20 to 50°C -20 to 50°C -20 to 50°C -20 to 50°C -10 to +50°C
condensing
20 to 85% noncondensing
19 to 85% noncondensing
19 to 85% noncondensing
Approvals/Certifications
CE, cULus 508 Listed CE, cULus 508 Listed CE, cULus 508 Listed CE, cULus 508 Listed CE, cULus 508 Listed CSA 22.2 #950-95,
> 30V DC V
out
< 20V DC V
out
26.5A typical @ 24V
for >1 sec
IOUT = 10 x V analog
Form C contacts (1A
@ 30V DC or 30V AC)
22 – 12 AWG
(.08 – 2.5 mm2)
6.8 x 9.4 x 5.3
(173 x 238 x 135)
(Full Power)
20 to 85% noncondensing
> 30.5V DC
out
< 20V DC
out
43A typical @ 24V for
>1 sec
Form C contacts (1A
@ 30V DC or 30V AC)
22 – 12 AWG
(.08 – 2.5 mm2)
7.2 x 10.6 x 5.3
(182 x 268 x 133)
-10 to +50°C
(Full Power)
20 to 85% noncondensing
cULus 508 Listed, CE
13
CA00912001E For more information visit: www.eaton.com
Loading...