Cutler Hammer, Div of Eaton Corp PSG60N24RP Data Sheet

DATASHEET - PSG60N24RP

Power supply unit, 1-phase, 100-240VAC/24VDC, 2.5A

Part no. PSG60N24RP
Catalog No. 172890
Alternate Catalog

PSG60N24RP
No.
EL-Nummer

4560888
(Norway)

Delivery program

Product range Power supplies PSG

Subrange power supply unit

Description Power Boost via 1.5-fold rated operational current for 5 s

Phases Single-phase

Input voltage range 85 - 264 V AC

Nominal input voltage 100 - 240 V AC

Rated output voltage 24 V DC (± 2%)

Rated output current A 2.5

Setting range for the output voltage 22 - 28 V DC

Rated output power W 60

PELV (EN 60204), SELV (EN 60950)

(120 - 375 V DC)

Technical data

Input characteristics

Nominal input voltage 100 - 240 V AC

Input voltage range V 85 - 264 V AC

Supply frequency

Rated value Hz 50/60

Range Hz 47 - 63

Nominal current I

Inrush current limitation I²t (+25 °C) A < 40 A at 115 V AC

Mains buffering at nominal load ms

Mains failure bridging ms > 20 at 115 V AC

Run-up time after mains voltage applied ms < 3000

Internal input fuse (device protection, not accessible) T3.15 AH/250 V

Back-up fuse 6, 10, 16 A (recommended)

Tripping characteristic B

Leakage Current < 1 mA at 240 V AC

Short-term interruption 100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start

n

Output characteristics

Rated output power W 60

Rated output voltage 24 V DC (± 2%)

Tolerance ±2 %

Setting range for the output voltage 22 - 28 V DC

Nominal current A 2,5

Derating from T

Capacitive load starting Max 8000 µF

Heat dissipation W 9

Efficiency % > 86 with 115 V AC

Residual ripple and switching peaks < 50 mVpp / < 150 mVpp

> +50 °C > 50 °C (2.5% / °C)

amb

120 - 375 V DC

A 1.5 bei 100 V AC

< 80 A at 230 V AC

> 125 at 230 V AC

> 70 °C (4% / °C),

> 87 with 230 V AC

08/30/2019 Eaton 172890 ED2019 V58.0 EN 1 / 4

General characteristics

Housing Insulated material

Status indication green LED for "DC OK"

MTBF (mean time between failures) > 800,000 h

Height mm 120.6

Width mm 32

Depth mm 119.3

Weight kg 0.33

Terminations Screw connection

Stripping length mm 7

Terminal capacity

flexible with ferrules/solid

Tightening torque Nm 0.5

Ambient air temperature range °C

Operation °C -20 - +80 (> 50 °C derating)

Storage, transport ϑ °C

Storage ϑ °C -25 - +85

damp heat < 95 % relative humidity at +25 °C, no condensation

Vibrations (IEC/EN 60068-2-6) 10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions

Mechanical shock resistance (IEC 60068-2-27) 30 g (300 m/s²) in all directions

Pollution degree 2

Climatic class (IEC) 3K3 according to EN 60721

2

0.32 - 5.3 mm² (AWG 22 -10)

mm

Safety and safety features

Transient overvoltage protection Varistor

Current limitation at short-circuit I

Overvoltage protection Yes, against internal overvoltage

Insulation voltage

Input/Output 4 kV AC (type test), 3 kV AC (routine test)

Input/PE 1.5 kV AC

Output/PE 1.5 kV AC

Degree of Protection IP20

Protection class Class I with PE connection

= 150 % der max. Ausgangsleistung

Überstrom

Standards

Electrical equipment of machines: IEC60204-1 (Overvoltage category III)
Equipping power installations with electronic apparatus: EN 50178/IEC 62103
Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950)
Protection against electric shock: DIN 57100-410
CE: according to EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
RoHS-compliant: RoHS Directive 2011/65/EU
ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024
Industrial: EN 55011
Mains harmonics limitation: EN 601000-3-2
Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL
60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1
UL508
Class2: UL/c-UL recognized to UL1310 and CSA C22.2 No. 223 |
Component power supply unit for general use: EN61204-3

Approvals EAC

Design verification as per IEC/EN 61439

Technical data for design verification

Rated operational current for specified heat dissipation I

Heat dissipation per pole, current-dependent P

Equipment heat dissipation, current-dependent P

Static heat dissipation, non-current-dependent P

Heat dissipation capacity P

Operating ambient temperature min. °C -25

Operating ambient temperature max. °C 80

IEC/EN 61439 design verification

10.2 Strength of materials and parts

10.2.2 Corrosion resistance Meets the product standard's requirements.

08/30/2019 Eaton 172890 ED2019 V58.0 EN 2 / 4

n

vid

vid

vs

diss

A 0

W 0

W 0

W 9

W 0