Cutler Hammer, Div of Eaton Corp IntelliView Series Sensors Selection Guide
Photoelectric Sensors
Rectangular
(50 x 50 x 25 mm)
Flat Tubular (18 mm)
Flat Tubular (18 mm)
IntelliView Series Sensors
5.3
Overview—Luminescence Sensing Models
Luminescence Sensors
●
Perfect for the detection of
any luminescent target,
even on reflective
materials such as
ceramics, metal or
mirrored glass
Luminescence Sensing Basics
Luminescence is defined as visible light emission from fluorescent or phosphorescent substances.
Luminescence sensors emit ultraviolet light, which is then reflected at a higher wavelength from
the target surface. The UV emission from the sensor is modulated and the visible light received is
synchronized, resulting in immunity against external interferences such as reflections caused by
shiny objects. Luminescence sensors are used in various industries to detect labels, fluorescent
marks or signs, fluorescent glues on paper, to distinguish cutting and sewing guides, and to check
fluorescent paints or lubricants.
Color, Contrast and Luminescence Sensing
Color, Contrast and Luminescence Sensing Models
Voltage
Range Sensing Range Connection
Color Sensors
10–30 Vdc 5–45 mm
●
Capable of sensing from
8–20 mm from the sensor
face
●
Simple three-step setup
routine and optional “fine
setup routine” for more
complicated applications
(0.19–1.77 in)
2
8-pin microconnector
●
Can function in either light
operate or dark operate
mode
●
Standard M12 4-pin microconnector (mating cable
available on Pa ge
V8-T5-30)
1
Output Type Catalog Number
1
3 NO PNP outputs E76-CLRMKP-M12
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Contrast Sensors
10–30 Vdc 10 mm
Luminescence Sensors
10–30 Vdc 8–20 mm
Notes
1
For complete connector cables, see Page V8-T5-38.
2
Refer to Detection Diagram on Page V8-T5-43.
3
Sensing parameters may be adjusted using the RS485 serial interface.
The RGB color data is not available through this serial link.
(0.39 in) ideal
(0.31–0.79 in)
4-pin microconnector
4-pin microconnector
3 NO NPN outputs E76-CLRMKN-M12
3 NO NPN outputs,
RS485 connection
Light operate or dark
operate, PNP output
Light operate or dark
operate, NPN output
Light operate or dark
operate, PNP output
E76-CLRMKRS-M12
3
E76-CNT010P-M12
E76-CNT010N-M12
E76-UV020P-M12
5
5
5
5
5
5
5
5
5
5
5
5
5
Volume 8—Sensing Solutions CA08100010E—July 2014 www.eaton.com V8-T5-37
5.3
M12 Micro-Connector,
Straight Female
1-Brown
2-White
3-Blue
4-Black
3
8
2
5
1
7
6
4
1-White
2-Brown
3-Green
4-Yellow
5-Gray
6-Pink
7-Blue
8-Red
Mounting Brackets—
L-Shaped
Mounting Bracket
Ball Swivel
Compatible Connector Cables
5
5
5
5
5
5
5
5
5
5
5
Accessories
Photoelectric Sensors
IntelliView Series Sensors
Standard Cables
Voltage
Style
Micro-Connector, Straight Female
DC 4-pin,
Number
of Pins Gauge Length
4-wire
5-pin,
5-wire
8-pin,
8-wire
1
22 AWG 6 ft (2m) CSDS4A4CY2202 CSDS4A4RY2202 CSDS4A4IO2202
16.4 ft (5m) CSDS4A4CY2205 CSDS4A4RY2205 CSDS4A4IO2205
32.8 ft (10m) CSDS4A4CY2210 CSDS4A4RY2210 CSDS4A4IO2210
22 AWG 6 ft (2m) CSDS5A5CY2202 — —
16.4 ft (5m) CSDS5A5CY2205 — —
32.8 ft (10m) CSDS5A5CY2210 — —
24 AWG 6 ft (2m) CSDS8A8CB2402 — —
16.4 ft (5m) CSDS8A8CB2405 — —
32.8 ft (10m) CSDS8A8CB2410 — —
Pin Configuration/Wire Colors
(Face View Female Shown)
1-Brown
2-White
12
3-Blue
5
4
4-Black
3
5-Green/Yellow
PVC
Catalog Number
PUR
Catalog Number
IRR PUR
Catalog Number
5
5
5
5
5
5
5
5
5
5
5
5
5
5
IntelliView Series Sensors
Description Sensor Compatibility Catalog Number
Mounting Brackets—L-Shaped
L-shaped mounting bracket for IntelliView sensors
Mounting hardware included
Long L-shaped mounting bracket for IntelliView sensors
Mounting hardware included
Adjustability: Allows some adjustment in one axis and
allows for aiming of the sensor through a short arc
Sensor mounting: Sensor mounts with two jam nuts and
washers (included with sensor)
Material of construction: Aluminum with chromate finish
Packaging: Two per package
Mounting Bracket Ball Swivel
Allows 360° rotation and 10° vertical tilt
Hole spacing is identical to our 50 and 55 series sensors
Ideal for mounting Right Angle sensors
Made of Noryl
Additional Mounting Brackets
More mounting brackets compatible with IntelliView sensors, see Tab 8, section 8.2
Dimensions, see Page V8-T5-47.
Note
1
®
For a full selection of connector cables, see Tab 10, section 10.1.
All models starting with E75-PPA_ E75-MTB1
All models starting with E76-CLR_
and E75-PP1MP-M12
All 18 mm flat tubular sensors 6161AS6501
All 18 mm flat tubular sensors 6181AS5200
E76-MTB1
5
5
5
5
5
V8-T5-38 Volume 8—Sensing Solutions CA08100010E—July 2014 www.eaton.com
Loading...