Page 1
Dozens of
Operators
to Perfectly
Fit Your
Application
Viton
Gasket Seals
Throughout
One-Piece,
Epoxy Filled
Switch Body
Is Leak Proof
Type SOOW-A
Water Resistance
Cable Is Pre-wired
at Factory
Uses the Same
Operating
Heads as Our
Standard
Plug-In Line
Mini-Connector
Models Available
Rugged
Zinc Die Cast
Construction
August 2007
Heavy-Duty Factory Sealed
6P+ Switches
Contents
Overview . . . . . . . . . . . . . . . . . . . . . 1
Model Selection, Assembled
Switches . . . . . . . . . . . . . . . . . . . . 2
Model Selection,
Operating Heads. . . . . . . . . . . . . . 4
Model Selection,
Switch Bodies . . . . . . . . . . . . . . . . 5
Model Selection,
Accessories . . . . . . . . . . . . . . . . . . 7
Specifications. . . . . . . . . . . . . . . . . . 8
Dimensions . . . . . . . . . . . . . . . . . . . 9
Cutler-Hammer
Switches by Eaton’s electrical
business were specifically designed
to withstand the penetrating properties of cutting fluids and coolants,
such as those used in the automotive industry, as well as extreme
shock, vibration and temperature
fluctuations. The one-piece, epoxy
filled switch body is prewired at the
factory to ensure leak-proof, submersible performance. This unique
construction positively stops fluid
from finding its way to any and all
critical connections.
Our 6P+ switches can be ordered in
separate components or as complete
assembled devices. They are available
with prewired 16 AWG cables or miniconnectors. Standard and custom
cable lengths are available. As part of
the E50 line, the 6P+ switches use the
same operating heads as the standard
E50 plug-in models to reduce the
components you need to inventory.
Approvals
UL Listed
■
CSA Certified
■
■
IEC.947.5.1
TUV — E9271605E02
■
®
E50 6P+ Limit
Limit Switches
Heavy-Duty Factory Sealed 6P+ Switches
PG.05C.09.T.E
The Best Sealed, Most Durable Limit Switch You Can Buy
Product Features
Manufactured to take the physical and environmental abuse (including cut-
■
ting fluids and chemicals) of harsh industrial environments
Modular, plug-in components (head and switch body) provide application
■
flexibility, reduced inventory and less downtime
■
Chemical resistant Viton gaskets, seals and boots are standard, and so are
captive, posi-drive screws
A special tertiary seal on the switch body prevents fluid from entering even
■
when the operating head is not attached
600V rating, ridge-topped contacts and wiping action assure continuity
■
even to logic level circuits
■
Factory wired cable features a 350 pound pullout capacity
■
Keyed, four direction head positioning. Standard 5° pre-travel and 90° total
travel
■
24 – 120V AC/DC LED and 120V AC neon indicating lights available
Rotary heads are field convertible CW, CCW, or both, without special tools
■
■
Extended 5 year warranty
1
PG.05C.09.T.E For more information visit:
(where shown)
Unless otherwise noted, the
products contained in this
document are not designed
or intended for use in human
safety applications.
For Customer Service in the U.S. call 1-877-ETN CARE (386-2273) ,
in Canada call 1-800-268-3578 .
For Application Assistance in the U.S. and Canada
call 1-800-426-9184 .
www.eaton.com
Page 2
Limit Switches
2
Heavy-Duty Factory Sealed 6P+ Switches
August 2007
Model Selection — Assembled Switches — Standard (Connection is by 8-Foot Cable)
Assembled
Switch
Lever Sold Separately
Operating Head Type
Side Rotary (requires
an operating lever,
see
PG.05C.04.T.E )
Side Pushbutton,
Spring Return —
E50DS1
Side Pushbutton,
Adjustable
Spring Return —
E50DS2
Indicating Light: None LED
Switch Body:
Standard
Spring Return —
E50DR1
Low Force
Spring Return —
E50DL1
Maintained
Two-Position —
E50DM1
Single Pole Double Pole
E50SA6P
1N.O.-1N.C.
(24 – 120V AC/DC)
E50SAL6P
1N.O.-1N.C.
Neon
(120V AC)
E50SAN6P
1N.O.-1N.C.
None LED
E50SB6P
2N.O.-2N.C.
Catalog Number for Assembled Switches
E50AR16P E50ALR16P E50ANR16P E50BR16P E50BLR16P E50BNR16P
E50AL16P E50ALL16P E50ANL16P E50BL16P E50BLL16P E50BNL16P
E50AM16P E50ALM16P E50ANM16P E50BM16P E50BLM16P E50BNM16P
E50AS16P E50ALS16P E50ANS16P E50BS16P E50BLS16P E50BNS16P
E50AS26P E50ALS26P E50ANS26P E50BS26P E50BLS26P E50BNS26P
(24 – 120V AC/DC)
E50SBL6P
2N.O.-2N.C.
Neon
(120V AC)
E50SBN6P
2N.O.-2N.C.
Side Push Roller,
Spring Return —
E50DS3
Side Pushbutton,
Maintained —
E50DH1
E50AS36P E50ALS36P E50ANS36P E50BS36P E50BLS36P E50BNS36P
E50AH16P E50ALH16P E50ANH16P E50BH16P E50BLH16P E50BNH16P
Wiring: Single Pole 1N.O.-1N.C. (Must be same polarity) Double Pole 2N.O.-2N.C. (Same polarity each pole)
Connection options (add the Code Suffix from the table below to the end of the Catalog Number):
Option Catalog
Mini-Connector
Single Pole (5-Pin Mini-Connector) CSMS5D5CY1602 C
Number
Code Suffix
Double Pole (9-pin Mini-Connector) CSMS9D9CY1602 C
Cable Connection 12-foot cable length (standard)
20-foot cable length (standard)
Other lengths (special order)
Stocked product, typical order quantities guaranteed in stock.
—12
—20
— Length in Feet
For Operating Head specifications, see
Page 4.
CW (clockwise) and CCW (counterclockwise)
operation, easily convertible to CW only or
CCW only operation.
Roller can be converted in the field between
horizontal and vertical.
For alternate wiring, use Code Suffix CW,
see Page 6.
For a full selection of connector cables, see
PG.05.05.T.E .
For more information visit: www.eaton.com
PG.05C.09.T.E
Page 3
Limit Switches
Heavy-Duty Factory Sealed 6P+ Switches
August 2007
Model Selection — Assembled Switches — Standard (Connection is by 8-Foot Cable) (Continued)
Assembled
Switch
Lever Sold Separately
Operating Head Type
Top Pushbutton,
Spring Return —
E50DT1
Top Pushbutton,
Adjustable
Spring Return —
E50DT2
Indicating Light: None LED (24 –
Switch Body:
Single Pole Double Pole
E50SA6P
1N.O.-1N.C.
120V AC/DC)
E50SAL6P
1N.O.-1N.C.
Neon
(120V AC)
E50SAN6P
1N.O.-1N.C.
None LED (24 –
E50SB6P
2N.O.-2N.C.
Catalog Number for Assembled Switches
E50AT16P E50ALT16P E50ANT16P E50BT16P E50BLT16P E50BNT16P
E50AT26P E50ALT26P E50ANT26P E50BT26P E50BLT26P E50BNT26P
120V AC/DC)
E50SBL6P
2N.O.-2N.C.
Neon
(120V AC)
E50SBN6P
2N.O.-2N.C.
3
Top Push Roller,
Spring Return —
E50DT3
Wobble Head, Spring
Return (requires a
wobble operator, see
PG.05C.04.T.E )
Standard Duty —
E50DW1
Heavy-Duty
E50AT36P E50ALT36P E50ANT36P E50BT36P E50BLT36P E50BNT36P
E50AW16P E50ALW16P E50ANW16P E50BW16P E50BLW16P E50BNW16P
E50AW26P E50ALW26P E50ANW26P E50BW26P E50BLW26P E50BNW26P
High Strength
Steel —
E50DW2
Wiring: Single Pole 1N.O.-1N.C. (Must be same polarity) Double Pole 2N.O.-2N.C. (Same polarity each pole)
Connection options (add the Code Suffix from the table below to the end of the Catalog Number):
Option Catalog
Mini-Connector
Single Pole (5-Pin Mini-Connector) CSMS5D5CY1602 C
Number
Code Suffix
Double Pole (9-pin Mini-Connector) CSMS9D9CY1602 C
Cable Connection 12-foot cable length (standard)
20-foot cable length (standard)
Other lengths (special order)
—12
—20
— Length in Feet
For Operating Head specifications, see
Page 4 .
For alternate wiring, use Code Suffix C-W ,
see Page 6 .
For a full selection of connector cables, see
PG.05.05.T.E .
For alternate wiring, use Code Suffix CW,
see Page 6.
Stocked product, typical order quantities guaranteed in stock.
PG.05C.09.T.E For more information visit: www.eaton.com
Page 4
Limit Switches
4
Heavy-Duty Factory Sealed 6P+ Switches
August 2007
Model Selection — Operating Heads
Description Travel to
Side Rotary (requires an
operating lever, see
PG.05C.04.T.E )
Standard Spring
Return
Low
Temperature
Spring Return
Low Force
Spring Return
Maintained
Two-Position
Side
Pushbutton,
Spring Return
Side
Pushbutton,
Adjustable
Spring Return
Side Push
Roller, Spring
Return
Side
Pushbutton,
Maintained
Operate
Contacts
5° 2° 90° 3 in-lbs 4.5 in-oz 10° to 200°F
5° 2° 90° 3 in-lbs 4.5 in-oz -40° to 175°F
15° 6° 90° 1.5 in-lbs 2.5 in-oz 10° to 200°F
50° 50° 90° 3 in-lbs — 14° to 200°F
0.065
inch
0.065
inch
0.065
inch
0.200
inch
Travel to
Reset
Contacts
0.030
inch
0.030
inch
0.030
inch
0.130
inch
Tot al
Travel
0.250
inch
0.250
inch
0.250
inch
0.320
inch
Force to
Operate
Contacts
Minimum
Return
Force
Operating Temperature
Without Cable With Pre-wired
(-12° to 94°C)
(-40° to 79°C)
(-12° to 94°C)
(-10° to 94°C)
4 lbs 8 oz 14° to 200°F
(-10° to 94°C)
4 lbs 8 oz 14° to 200°F
(-10° to 94°C)
4 lbs 8 oz 14° to 200°F
(-10° to 94°C)
5 lbs 5 lbs 14° to 200°F
(-10° to 94°C)
Cable
10° to 200°F
(-12° to 94°C)
-31° to 175°F
(-34° to 79°C)
10° to 200°F
(-12° to 94°C)
14° to 200°F
(-10° to 94°C)
14° to 200°F
(-10° to 94°C)
14° to 200°F
(-10° to 94°C)
14° to 200°F
(-10° to 94°C)
14° to 200°F
(-10° to 94°C)
Catalog
Number
E50DR1
E50DR19
E50DL1
E50DM1
E50DS1
E50DS2
E50DS3
E50DS4
E50DH1
Top
Pushbutton,
0.040
inch
0.020
inch
0.280
inch
4 lbs 8 oz 14° to 250°F
(-10° to 121°C)
14° to 221°F
(-10° to 105°C)
E50DT1
Spring Return
Top
Pushbutton,
0.040
inch
0.020
inch
0.280
inch
4 lbs 8 oz 14° to 250°F
(-10° to 121°C)
14° to 221°F
(-10° to 105°C)
E50DT2
Adjustable
Spring Return
Top Push
Roller, Spring
0.040
inch
0.020
inch
0.280 inch 4 lbs 8 oz 14° to 250°F
(-10° to 121°C)
14° to 221°F
(-10° to 105°C)
E50DT3
Return
Wobble Head, Spring Return
(requires a wobble operator,
PG.05C.04.T.E )
see
Standard
Duty
Heavy-Duty
High Strength
10° 6° 15° 2 in-lbs 2.4 in-oz 14° to 250°F
(-10° to 121°C)
10° 6° 15° 2 in-lbs 2.4 in-oz 14° to 250°F
(-10° to 121°C)
14° to 221°F
(-10° to 105°C)
14° to 221°F
(-10° to 105°C)
E50DW1
E50DW2
Steel
Temperature ranges below +32°F (0°C) are based on absence of freezing moisture or water.
CW (clockwise) and CCW (counterclockwise) operation, easily convertible to CW only or CCW only operation.
For CW and CCW operation. For CW only or CCW only operation, high temperature limit increases to 250°F (121°C) without cable, and 221°F (105°C)
with pre-wired cable.
Roller can be converted in the field between horizontal and vertical.
Roller shaft is 0.38 inches (9.5 mm) longer on E50DS4, see dimensions on Page 9 .
Stocked product, typical order quantities guaranteed in stock.
For more information visit: www.eaton.com
PG.05C.09.T.E
Page 5
August 2007
Model Selection — Switch Bodies
Circuit Switch Body Construction Cable
Pre-wired Cable Single Pole
1N.O.-1N.C.
Double Pole
2N.O.-2N.C.
Mini-Connector Single Pole
1N.O.-1N.C.
Limit Switches
Heavy-Duty Factory Sealed 6P+ Switches
Length
Without Indicating Light 8-foot E50SA6P
12-foot E50SA6P12
20-foot E50SA6P20
With LED Indicating Light
24 –120V AC/DC
With Neon Indicating Light
120V AC
Without Indicating Light 8-foot E50SB6P
With LED Indicating Light
24 – 120V AC/DC
With Neon Indicating Light
120V AC
Without Indicating Light
Normal Wiring
8-foot E50SAL6P
12-foot E50SAL6P12
20-foot E50SAL6P20
8-foot E50SAN6P
12-foot E50SAN6P12
20-foot E50SAN6P20
12-foot E50SB6P12
20-foot E50SB6P20
8-foot E50SBL6P
12-foot E50SBL6P12
8-foot E50SBN6P
12-foot E50SBN6P12
20-foot E50SBN6P20
—
Catalog
Number
E50SA6PC
5
Wiring
Without Indicating Light
Alternate Wiring
With LED Indicating Light
24 – 120V AC/DC
With Neon Indicating Light
120V AC
The wire colors referenced on these diagrams are those internal to the switch itself.
See listing of compatible connector cables on Page 6 .
Fast turn product with typical one business day lead-time to shipment.
Stocked product, typical order quantities guaranteed in stock.
—
—
—
E50SA6PC-W
E50SAL6PC
E50SAN6PC
PG.05C.09.T.E For more information visit: www.eaton.com
Page 6
Limit Switches
e
ed
3-G
n
ge
5
k
6
Heavy-Duty Factory Sealed 6P+ Switches
Model Selection — Switch Bodies (Continued)
Circuit Switch Body Construction Cable Length Catalog
Mini-Connector Double Pole
2N.O.-2N.C.
Without Indicating Light — E50SB6PC
Number
Wiring
August 2007
With LED Indicating Light
24 – 120V AC/DC
With Neon Indicating Light
120V AC
The wire colors referenced on these diagrams are those internal to the switch itself.
See listing of compatible connector cables below.
— E50SBL6PC
— E50SBN6PC
Model Selection — Compatible Connector Cables
Voltage
Style
Standard Cables — Mini Style
Mini Style
Straight Female
Current Rating @ 600V
5-pin: 8A
9-pin: 7A
For a full selection of connector cables, see PG.05.05.T.E.
Stocked product, typical order quantities guaranteed in stock.
— 5-pin 16 AWG 6 feet (2m)
— 9-pin 16 AWG 12 feet (4m)
Number
of Pins
Gauge Length Catalog Number Pin Configuration/Wire Colors
CSMS5D5CY1602
CSMS9D9CY1602
(Face View Female Shown)
1-Orange
2-Blue
3-Red/Black
4-Green/Black
5-White
6-Red
7-Green
8-White/Black
9-Black
1-Whit
2-R
ree
4-Oran
-Blac
For more information visit: www.eaton.com
PG.05C.09.T.E
Page 7
Limit Switches
Heavy-Duty Factory Sealed 6P+ Switches
August 2007
Model Selection — Accessories
Approximate Dimensions in mm [Inches] Description Catalog Number
Adapter
Plate
Allows E50 to replace Eaton’s Cutler-Hammer
10316 Type LP Surface Mounting Plug-In Limit
Switch
E50KH1
7
Adapter
Plate
Adapter
Plate
Adapter
Plate
Allows E50 to replace Eaton’s Cutler-Hammer
10316 Type LP Manifold Mounting Plug-In Limit
Switch
Allows E50 to replace Square D Type AW
Surface Mounting Non Plug-In Standard Box
Limit Switch
Allows E50 to replace National Acme,
Type D-1200M, Style 2 Mounting. Denison
LoxSwitch, Model L-100W, Style 2 Mounting.
Square D 9007 Type T, Style B Mounting. (Adapter
plate is 1/8 inch thick, with 1/4 inch mounting
holes.)
Allows E50 to replace National Acme,
Type D-1200M, Style 1 Mounting. Denison
LoxSwitch, Model L-100W, Style 1 Mounting.
Square D 9007 Type T, Style C Mounting. (Adapter
plate is 1/8 inch thick, with 1/4 inch mounting
holes.)
E50KH1M
E50KH7
E50KH4
E50KH5
Adapter
Plate
Adapter
Plate
59.5
[2.340]
76
[3.00]
#10-32 UNC-2B HOLE
Limit Switch not included.
39
[1.54]
29.5
[1.160]
5.2 [0.204]
DIA.
(2 HOLES)
4.8
[0.19]
THICK
13.5
[0.531]
Allows E50 to replace Eaton’s Cutler-Hammer
10316 Type LT Non Plug-In 2-Pole Limit Switch
Allows E50 to replace Allen-Bradley 802M Sealed
Limit Switch
E50KH2
E50KH10
PG.05C.09.T.E For more information visit: www.eaton.com
Page 8
Limit Switches
8
Heavy-Duty Factory Sealed 6P+ Switches
Model Selection — Accessories (Continued)
Approximate Dimensions in mm [Inches] Description Catalog Number
Adjustable
Mounting
Plate
This is a mounting plate only 5/16 inch thick and
includes the proper mounting bolts and nuts. The
slots in the plate allow a maximum horizontal
adjustment of 1 inch and vertical adjustment of
1-1/4 inches
E50KH3
August 2007
Conduit
Sealing
Nut
Limit Switch not included.
Stocked product, typical order quantities guaranteed in stock.
1/2 inch oiltight E50KH6
Specifications
Environmental Ratings NEMA 1, 3, 3S, 4, 4X, 6, 6P, 13, IP67
Material of Construction Zinc die cast
Switch Gasket Material Viton
Universal U.S./DIN Mounting Dimensions 1.16 in (30 mm) x 2.34 in (60 mm)
Conduit Entrance 1/2 in NPT threading
Contact Ratings See below
Contact Operation Snap action over center mechanism
Contact Material Fine silver
Maximum Frequency of Operation 8000 operations per hour
Mechanical Life:
Side Rotary
Side or Top Push
Electrical Life:
Single Pole
Double Pole
Ambient Temperature Range — Standard
Standard without Cable
Standard with Cable
Low Temperature without Cable
Low Temperature with Cable
Repeat Accuracy — Standard
Side Operated
Top Operated
Side Rotary
Torque Requirements:
Operating Head Screws 14 – 18 lb-in
®
13,000,000 operations minimum
10,000,000 operations minimum
1,000,000 operations typical at full load
100,000 operations typical at full load
14° to 250°F (-10° to 121°C)
14° to 221°F (-10° to 105°C)
-40° to 250°F (-40° to 121°C)
-40° to 221°F (-40° to 105°C)
Within 0.0012 in
Within 0.0003 in
Within 0.0014 in
Electrical Data — Maximum Contact Ratings (Same polarity each pole)
AC Volts Current, Amperes Voltamperes DC Volts Current, Amperes
Make Break Cont.
All Switches Except Gravity Return and Indicating Light Versions
NEMA A600 Rating NEMA R300
120
240
480
600
Switches with Indicating Lights (LED or Neon)
120 60 6 10 7200 720 125 0.22 1.0
Thermal rating. Valid only if switch does not have to make or break.
60
30
15
12
6
3
1.5
1.2
NEMA A150 Rating NEMA R150
Make Break Max. Make
10 7200 720 125
250
For more information visit: www.eaton.com PG.05C.09.T.E
or Break
0.22
0.11
Cont.
1.0
1.0
Page 9
Limit Switches
Heavy-Duty Factory Sealed 6P+ Switches
August 2007
Approximate Dimensions in mm [Inches]
6P+ Limit Switch
with Rotary Operating Head
Side Push Operators Top Push Operators Wobble Operators
Can accommodate both U.S.,
29.4 (1.16) x 59.5 (2.34) and
DIN, 30 (1.18) x 60 (3.26),
mounting dimensions.
9
Pushbutton
Adjustable Pushbutton
Roller
Pushbutton
See Operators, PG.05C.04.T.E
Adjustable Pushbutton
Roller
For E50DS4.
For E50DS3.
Maintained Pushbutton
PG.05C.09.T.E For more information visit: www.eaton.com
Loading...