Curtis RCD309 User Manual

RCD909

INSTRUCTION MANUAL

WARNING

To prevent fire or shock hazard, do not use this plug with an extension cord, receptacle other

outlet unless the blades can be fu lly inserted to present blade exposure. To prevent fire or

shock hazard, do not expose this appl iance to rain or moisture.

The li ghtning fl ash with arr owhead

Symbol, within an equilateral

Triangle, is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

prod uct's en closur e that may be of

sufficient magnitude to constitute

a risk of elect ric shock to pers ons.

WARNI NG:

TO REDUCE THE

RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR

BACK) NO USER-SERVICEABLE

PARTS INSIDE REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The ex clamation point with in an

equilatera l triangle is intended to

alert the user to the presence of

important operating and

main tenance (servic ing)ins tructio ns

in the li terature accompanyi ng the

Appliance.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warinigs.

4 Follow all instructi ons.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in acco rdance with the manufactur er's

instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are provided for your safety. If the

provide plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10 Protect the power cord from being walked on or pinch particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Unplug this apparatus during lightning st orms or when unused for long periods of time.

13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been exposed to rain or moisture, does not operate normally, or damaged, liquid has been exposed to rain or moisture, does not operate normally, or has been dropped.

14 This appliance shall not be exposed to dripping or splashing water and that no object filled

with liquids such as vases shall be placed on the apparatus.

15 Caution:To prevent electic shock, match wide of plug to wide slot,fully insert

TABLE OF CONTENTS

This instruction manual is important to you. Please read it. This manual tells exactly how to connect,

operate and adjust this unit for best performance.

It shows simple things to do and check before you call for help and saves the cost of unnecessary service

and call out charges.

TABLE OF CONTENTS----------------------------------------------------------------------------------2

CONNECTING TO MAINS SUPPLY-------------------------------------------------------------------3

LOCATION OF CONTROLS-----------------------------------------------------------------------------4

RADIO OPERATION--------------------------------------------------------------------------------------5

OPERATING INSTRUCTIONS--------------------------------------------------------------------------5-9

TECHNICAL SPECIFICATION--------------------------------------------------------------------------10

Pack contents:

1×main unit

1×remote control

1×AM Loop antenna

2×speakers

1×instruction manual

1×warranty card

Please retain all packing material for future transportation of the unit or the unlikely event that the unit needs to

be returned for service.

CONNECTING TO MAIN SUPPLY

MAINS (AC) OPERATION

This unit is designed to operate on 120V-60HZ current only. Connecting it to other power sources may damage

the unit.

CAUTION

To prevent electric shock disconnect from the mains before removing cover. There are no user serviceable parts

inside. Refer servicing to qualified service personnel.

Do not allow this unit to be exposed to rain or moisture.

Using three inch CD will easily cause damage for the machine

CLASS 1 LASER PRODUCT

Use of Controls or adjustments of performance of procedures other than those specified herein may result in

hazardous radiation exposure.

HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

CLEANING: Always disconnect unit from mains supply before attempting to clean it .Use soft cloth moistened

with soapy water, wipe gently. Do not use solvents or abrasive materials.

LOCATION OF CONTROL

1.CD COMPARTMENT

2. EJECT/OPEN button

3. VOLUME+/- button

4. POWER SWITCH button

5. P.EQ button

6. TUNER/BAND button

7. CD FUNCTION button

8. PLAY/PAUSE button

9.REVERSE SKIP/SEARCH TUNE DOWN button FORWRD SKIP/SEARCH TUNE UP button

10.MENU button

11. MEM.UP/REPEAT button

12. MEMORY/CLOCK button

13. STOP button

14. PHONES

15.Remote Control SENSOR

REMOTE CONTROL

1. POWER button

2. VOLUME+/- button

3. PLAY/PAUSE button

4. STOP button

5. RANDOM/AMS button

6.MEMORY/CLOCK button

7. MUTE button

TUNER/

BAND

M-UP

REPEAT

MUTE

DOWN UP

UPDOWN

MEMORY

CLOCK.

RANDOM

AMS

VOLUME

PLAY/

PAUS E

STOP

POWER

8. TUNER/BAND button

9. CD button

10.REPEAT/MEMORY UP button

11. REVERSE SKIP/SEARCH TUNE DOW N BUT TON FORWARD SKIP/SEARCH TUNE UP BUTTON

+ 7 hidden pages