Curtis PLEDV2488A-B User Manual

LED TV/DVD Combo
LEDV2488A
3
%
INSTRUCTION MANUAL
IMPORTANT
please read this manual carefully before installing and operating the TV. Keep this manual handy for further reference.
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- 1 -
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
x To avoid the risk of electric shock or
component damage, switch off the power before connecting other components to the TV.
x Unplug the power cord before cleaning
the TV. Please use the included custom bezel cleaning cloth for cleaning the bezel of the TV only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
x Always use the accessories
recommended by the manufacturer to insure compatibility.
x When moving the TV from an area of low
temperature to an area of high temperature, condensation may form on the housing. Do not turn on the TV immediately after this to avoid causing fire, electric shock or component damage.
x Do not place the TV on an unstable cart,
stand, or table. If the TV falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the TV.
x Any heat source should maintain a
distance of at least 5 feet away from the TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.
x Slots and openings in the back and
bottom of the cabinet are provided for ventilation. To ensure reliable operation of the TV and to protect it from overheating,
be sure these openings are not blocked or covered. Do not place the TV in a bookcase or cabinet unless proper ventilation is provided.
x Never push any object into the ventilation
slots of the TV. Do not place any objects on the top of the Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the TV.
x Do not use the TV in a portrait format (by
rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the TV.
x The TV should be operated only from the
type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
x The power cable must be replaced when
using different voltage from that specified in the User Manual. For more information, contact your dealer.
x The TV is equipped with a three-pronged
grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
x Do not overload power strips and
extension cords. Overloading can result in fire or electric shock.
- 2 -
x The wall socket should be installed near
the equipment and should be easily accessible.
x Only the marked power source can be
used for the product. Any power source other than the specified one may cause fire or electric shock.
x Do not touch the power cord during
thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
x Unplug the unit during a lightning storm or
when it will not be used for a long period of time. This will protect the TV from damage due to power surges.
x Do not attempt to repair or service the
product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
x Keep the product away from moisture. Do
not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
x Do not use the product if any abnormality
occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
x Avoid using dropped or damaged
appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and
contact your dealer for repair. Continued use of the product may cause fire or electric shock.
x Do not install the product in an area with
heavy dust or high humidity. Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
x Hold the power connector when removing
the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.
x To avoid risk of electric shock, do not
touch the connector with wet hands.
x Insert batteries in accordance with
instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.
x If any of the following occurs please
contact the dealer:
o The power connector fails or
frays.
o Liquid sprays or any object
drops into the TV.
o The Display is exposed to rain
or other moisture.
o The Display is dropped or
damaged in any way.
o The performance of the
Display changes substantially.
x Operating environment: Temperature: 5°C
~ 35°C, Humidity: 10% to 90% non­condensing, Altitude: 0~10,000 ft.
- 3 -
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.
- 4 -
Attaching or Removing the Stand
To attach the stand, place the display unit flat on a table. Afterwards match the 3 pins on the neck to the 3 pin holes on the stand.
- 5 -
Setup Wizard
Input / Main Menu
Pictur Emenu Sound Menu Time Menu / Clock Menu Setup Menu / Close Caption Lock Menu US / TV Channel Menu
PC Menu AV / Component / HDMI
DVD Function
20 21
23 25 26
28 32 33
42 45
Identifying Front and Rear Panel
Front View
Rear View Mounting Pattern
Indicator light
INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns green when the TV is turned on. Because of the LED in the panel, the TV might take 10 – 12 seconds to
power on. REMOTE SENSOR – The remote sensor receives all the commands from the remote control.
Remote sensor
Mounting Specification : 100mm x 100mm using screw size M4. Length of screw should not exceed 8mm. Please Note : The 8mm length of screw refers to how deep the screw can go inside the mounting holes. When you’re buying screws, you should add the original 8mm to the thickness of your mounting plate in order to get the total screw length.
- 7 -
This button switches between all the different sources of the TV. Whe n the OSD is active, this button acts as the enter button and confirms the me nu selection.
10
12 3 4 5 67
2
2
9
8
10
DVD IN/OUT Window
TV Remote Control
1
4
5 8
7
12
13
15 16
19 20 23 24 27 28
31
3 2
6 9
11
10
14
18 17
21 22 26 25 30 29
- 11 -
For universal remotes, this TV follows NEC’s universal remote code. You need to find the actual code from your cable or satellite or universal remote provider.
1.
POWER – Turns the TV on or off.
2. GUIDE – Opens the current digital channel information guide (antenna only).
3. MUTE – Turns the sound off from the TV. To un-mute either press VOL(+) or press the
MUTE button again.
4. NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are
watching TV. The channel will change after 2 seconds.
5. (-) – Inserts the dash for selecting digital channels directly.
6. R – Returns to the previous channel.
7. VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
8. MTS – Selects stereo, mono, or second audio programming.
9. CC – Cycles between different closed captioning modes.
10. Display – Shows the display info.
11. CH(+)/ CH(-)– functions as channel up and down.
12. Ÿ/ź/Ż/Ź/ENTER – These directional buttons allow you to move around in the TV’s
menu. Press the ENTER button when you want to select a particular option.
13. EXIT – Exit the main TV menu on the screen.
14. MENU – Brings up the main TV menu on the screen.
15. INPUT – Press this button to cycle through the INPUT source .
16. ASPECT – Press this button to change the picture’s cropping method.
17. FREEZE – Press this button to freeze current picture.
18. SLEEP – Turns the TV off in a specific set of time dependent on your selection.
19. FAV LIST – Gives you your list of favorite channels.
20. ADD/DEL – Adds or Deletes current channel from the favorite list.
21. FAV(-) – Press this button to change to the previous favorite channel.
22. FAV(+) – Press this button to change to the next favorite channel.
23. CH LIST –channel list
24. AUTO–PC Auto Adjust
25. PMODE – Selects various preset picture settings.
26. SMODE - Selects various preset sound settings.
27. TV – This button select the source TV.
28. AV – This button select the source TV.
29. USB – Launches the USB reader function for the pictures and music.
30. PC – This button select the source PC.
31. DVD Function key particular see P33 .
- 12 -
13
14
Loading...
+ 32 hidden pages