Curtis PAT102 User Manual

User Manual

of digital Set Top Box

PAT1 02

Please read this User Manual carefully to ensure proper use of this
product and keep this manual for future reference.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in accordance with the
instructions.

8) Do not install near any heat sources such as radiations, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized plug. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.

10) Protected the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from the
apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Unplug this apparatus during lighting storms or when unused for long
periods of time.

13) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power- supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

14) Mains plug is used as the disconnect device, the disconnect device
shall remain readily operable.

15) The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloth, curtains, etc.

16) No naked flame sources, such as lighted candles, should be placed on
the apparatus.

17) Attention should be drawn to the environmental aspects of battery
disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.

The symbol indicates that dangerous voltages constituting a risk of
electric shock are present within this unit.

The symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.

This symbol indicates that this product incorporates double
insulation between hazardous mains voltage and user accessible
parts.when servicing use only identical replacement parts.

CAUTION:
When the apparatus was in electrostatic circumstance, it may be
malfunction and need to reset by user.

Warning The USB memory stick should be plug in the unit directly.
USB extension cable should not be used to avoid failing of data
transferring and interference caused.

Table of Contents

Front and Rear Panel ........................................................................... 1

Remote Control.... ............................................................................... 2

Connections.........................................................................................3

First Time Installation........................................................................... 3

Troubleshooting...................................................................................8

Technical Specifications.......................................................................8

Front and Rear Panel

1. Front panel

1. STANDBY INDICATOR: Used to visually show power state of the set
top box, the LED will turn red if the set top box enter standby mode.

2. REMOTE CONTROL SENSOR: Used to receive the signal from the
remote control.

3. USB: Data input from USB storage devices.

2. Rear panel

DIGITAL
AUDIO

RF LOOP
THROUGH

RF IN

COAXIAL

100-240V~

HDMI OUT

50/60Hz

AUDIO OUT

L

VIDEO

VIDEO OUT

R

1. RF I N :

(if the cable provider is passing through 8VSB signal.)

2. RF LOOP THROUGH: This socket will bypass the RF signal to either
your TV or another video system.

3. COAXIAL: This socket connects to a coaxial socket on your surround
sound system.

4. HDMI OUT This socket connects to HDMI in device.

5. MAINS CABLE: This is used to connect to your main power supply.

6. AUDIO L/R: This socket allows you to connect your Set Top Box to

receive the Audio L/R signal.

7. VIDEO OUT:

Connect the AIR antenna or CATV cable here.

This socket output composite video signal.