7.Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators, heat registers,stoves, or other
apparatus (including
9.Do not defeat the safety purpose of the polarized or grounding type plug.A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide
If electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Unplug this apparatus during lightning storms or when unused for long periods of time.
13.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture , does not operate
14.Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases,
15.Splashing The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, splashing and no objects filled with liquids such as vases, shall be
placed on the apparatus.
16.A warning that an apparatus with class I construction shall be connected to a MAINS
Socket outlet with a protective ear thing connection.
amplifiers)that produce heat.
blade or the third prong are provided for your safety.
Normally, or has been dropped.
shall be placed on the apparatus. important safety instruction.
-2-
IMPORTANT SAFETY INSTRUCTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
The symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CLASS 1 LASER
PRODUCT
Caution
The DVD video player is a class 1 laser product. Use of controls
or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation Exposure.
As the laser beam used in this DVD video player is harmful to
the eyes, do not attempt to disassemble the Cabinet.
Refer servicing to qualified personnel only.
-3-
WARNINGS AND CAUTIONS
Warning
High voltages are used in the operation of this television
receiver.
Do not remove the cabinet back from your set Refer
servicing to qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Caution
Do not squash power supply cord under the
television receiver.
-4-
WARNINGS AND CAUTIONS
Caution
Never stand on, lean on, or suddenly push the television or its
stand. You should pay special attention to children. Serious
injury may result if it falls.
Caution
Do not place your television on an unstable cart, stand, shelf or
table.
Serious injury to an individual , and damage to the television,
may result If it falls.
Caution
When the television receiver is not used for an extended
period of time, it is advisable to disconnect the AC power cord
from the AC outlet.
Dim:515*320mm(
Caution
Avoid exposing the television receiver to direct sunlight and
other sources of the heat. Do not stand the television receiver
directly on other produces which give off heat. E.g. video
cassette players and audio amplifiers. Do not place naked
flame sources, such as lighted candles on the television.
Caution
If the television is to be built into a compartment or similar
enclosed, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and can
also be dangerous.
-5-
WARNINGS AND CAUTIONS
Thank you very much for purchasing this TV. To enjoy your product from the very
beginning, read this manual carefully and keep it handy for readyreference.
INSTALLATION
Locate the TV in the room wherelightdoesnotstrikethe screen.
directly
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and
indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid extremely warm locations to prevent possible damage to the cabinet or
premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC
supply or any other power supply.
Do not cover the ventilation openings when using theTV.
CAUTION
Never tamper with any components inside the TV, or any otheradjustment controls not
mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean
up dust or water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with dried soft cloth. During thunder
and lightning, unplug the power cord and antenna cord to prevent damage to your TV.
All repairs to this TV should only be performed by the TV service personnel.
Warning: Change or modifications to this unit not expressly by the part responsible for
compliance could void the use's authority to operate the Equipment.
-6-
Main features
Used as Television,display terminal,PC display
High luminance,wide viewing angle
Can store 125 TV programs
Translucency OSD Auto-search
5
Full function Remote Control
48
300
800:1
NTSC-M
HDMI
VGA
A
INTRODUCTION
19
,NTSC-N
75
464
4.7
45
140
5
392
-7-
INSTALLATION
Accessories
Infrared Remote Control............
UsersManual........................
User s Manual........................
Battery(AAA)............................2
Side panel
1 SOURCE
Display the input source menu.
2 MENU
To display TV MENU.
3 CH+/CH-
In TV mode press CH+ or CH- to
change the channel up and down.
In MENU,press CH+ or CH- to
select items in MENU.
when TV is in standby mode, press
CH+orCH-buttoninTVcontrol
panel will power on the TV.
4 VOL+/VOL-
Adjust sound level.
In MENU,adjust the item that you
Selected.
Front panel
1
1
2
1
1. Remote control sensor
2
. Indicator LED
3. Power
from STANDBY mode. Press it againto turn
the set back to STANDBY.
1
2
3
4
PressthisbuttontoturntheunitON
3
100-240V~50/60Hz
REAR AV Connection
Pb
ACINPUT
100-240V~50/60Hz
HDMIINPUT
VGAINPUT
Pr
YPbPr
INPUT
AUDIO
L
INPUT
R
Y
AV
All the terminals are(from left to right):
AC INPUT,HDMI ,VGA ,AV,YPbPr,AUDIO INPUT,PCAUDIO INPUT ,ANTENNA