Page 1
Page 2
Unit an d Accessory
Product Feature
Getting Started
Front View
Rea rr VV iew
Remote Control Key Functions
Menu Operation
Basic operation
Picture menu options
Audio menu options
Setup menu options
Feature menu options
Parental menu options
Disc Care
Simpl e Troubleshooting
TTechincal Specifications
3
3
4
4
5
6
88
88
1010
1111
111
13
14
16
17
18
18
19
21
22
23
1
2
Caution
Safety Information
Playing the DVD Player
Basic Control Function
OSD Menu In DVD Mode
Feature menu options in VGA
Feature menu options in Component
Page 3
caution
Caution
The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of s ufficient magnitude to constitute a
risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Co r rec t di spo sa l of t hi s Pr odu ct
W aste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with hi gh q ua li ty m at er ia ls a nd
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for used electrical
and electronic products. Please help us to conserve the environment we live in!
1
Page 4
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
El ectri cal safety
The TV set should only be connected to a mains supply which match es t ha t st at ed o n
the label.
To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
Do not place any connecting wires where: they may be stepped on or tripped ove r.
Do not place heavy items on them, which may damage the leads.
Hold the main plug, not the wires, when removing from a socket.
During a thunderstorm or while leaving the TV fo r lo ng p er io ds , set the switch o ff.
Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or
moist areas, such as Bathrooms, steamy kitchens or near swimming pools.
Pull the plug out immediatel y, and seek professional help if: the mains plug or cable is
damaged, liquid is spilt onto the set, or if it is accidentally exposed to water or moisture,
anything accidentally penetrates the ventilation slots, the set doesn't work normall y.
Do not remove the safety covers. T he re a re no user serviceable parts inside.Yo u ma y
invalidate the warrant y. This apparatus must only be serviced by qualified personnel.
To avoid battery leakage, remove exhausted batteries from the remote control, or when
not using far a long period.
Do not break open or throw exhausted batteries on a fire.
Ph ysica l sa etyf
Do not block ventilation slots in the hack cover. You may place the TV in a cabinet, but
ensure at least 5cm (2") clearance all around.
Do not tap or shake the T V sc re en , or y ou m ay d am ag e th e in te rn al c ir cu it s.Take good
care of the remote control.
To clean the TV use a soft dry cloth. Do not use solvents or petrol based fluids.
Do not install near any heat sources such as radiators, heat registers stoves or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A p ol ar iz ed
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong, the wide blade or the third prong is provided for
your safet y. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs.
Use only attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the appara-
tus has been damaged in any way, su ch a s po we r- su pp ly c or d or p lu g is d am ag ed ,
liquid has been spilled or objects have fallen into the apparatus, has been exposed to
rain or moisture, does not operate normally or has been dropped.
Please always connect an apparatus with Class I structure to a main socket with protec-
tive earthing connection.
Please make sure both main plug and appliance coupler work properly.
2
Page 5
Unit and Accessory and Product Feature
Main s cable
Main s adaptor
POWER
MUTE
AUTO
EJECT
P.MODE
S.MODE
TITLE
MENU
LCD-MENU
DVD-SETUP
DISPLAY
SOURCE
ENTER
VOL+
PLAY
/PAUSE
CC
MTS
GOTO
SUBTITLE
ZOOM
ANGLE
PROGAM
INTRO
PEPEAT
AB
STOP
SLOW/STEP
AUDIO
CH+
VOL-
CH-
3
Page 6
Getting S ta rted
Getting Started
CH
VOL
POWE R
MENU
TV/AV
(IR) I nfrared R eceiver: Receives IR s ignals fr om the remote control.
(Pow er on/Sta ndby) LED Indicator: P ressPOWER to turn on and off,
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
LED
4
Inse rt a 12cm disc wi th the
labe l side facing t owards you
Page 7
Getting Started
Name Function Description
POWER (DCIN)
VGA IN
HDMI IN
VGA signal from computer output
YPbPr
Connect to the composite terminal of your DVD/VCR
S- i de o INV
S-Video signal input
Video IN
Video signal input
(A L/RUDIO)
Audio signal input for AV
PC Audio in
PC audio input
Earphone Connect it to your head phone or other audio equipment
Connect to antenna or cable source
Connect to Mains Adapter
Connect to HDMI of DVD or other equipment
ANT 75Ω
5
Page 8
TITLE
MENU
POWER
AUTO EJECT
DVD play list/ DISC menu.
Remote Control Key Functions
Press to select the DVD title.
Press this button to enter a program number for
multiple program channel such as 2-1,etc.
Return to the previous channel viewed.
POW ER
MUT E
AUT O
EJE CT
P.M ODE
S.M ODE
TIT LE
MEN U
LCD- MENU
DVD- SETUP
DIS PLAY
SOU RCE
ENT ER
VOL +
PLAY
/PAU SE
CC
MTS
GOTO
SUB TITLE
ZOO M
ANG LE
PRO GAM
INT RO
PEP EAT
AB
STOP
SLO W/STE P
AUD IO
CH+
VOL -
CH-
Switch on LCD TV at standby mode or vice versa.
DVD eject
MUTE
Press to mute the sound. Press again or press
to resume.
VOL+
S.MODE
P.MODE
Press to cycle through the different sound settings.
Press repeatedly to cycle through the available
picture modes.
video
NUMBER B UT TONS
Press 0-9 to select a TV channel directly when
are watching TV. The channel change after 2 seconds.
you
TV
S-Video
Composite Component
VGA
HDMI DVD
LCD-MENU
DVD-SETUP
TV system setup.
DVD system setup.
SOURCE
Press to cycle through the input source in following:
DISPLAY
Press to display the source and channel’s information.
THUMBSTICK
Allows you to navigate the on-screen menus and
adjust the system settings to your preference.
6
Page 9
INTRO
If you play CD,it will scan program with 3S.
A-B
Select and play the preferable paragraph of DVD
program by pressing this key twice at the beginning
and end of it.
REPEAT
Repeat playing the title or chapter.
PROGRA M
Press this button to change the playback order.
It varies according to the different discs.
ANGLE
Select DVD picture angle.
ZOOM
Select display mode:FULL/4:3 .
In DVD source this buttons to adjust DVD picture size.
DVD next chapter.
DVD previous chapter.
SUBTIT LE
Select DVD disc subtitle.
GOTO
Play your favorite title/chapter/track.
MTS
DVD fast forward. / Press to select the audio channels.
CC
DVD fast reverse. / Press to display the closed caption.
AUDIO
Select DVD disc language.
SLOW/S TE P
Play DVD programs at slow speed.
STOP
Stop DVD program.
Play/P au se
Play/Pause DVD program.
POW ER
MUT E
AUT O
EJE CT
P.M ODE
S.M ODE
TIT LE
MEN U
LCD- MENU
DVD- SETUP
DIS PLAY
SOU RCE
ENT ER
VOL +
PLAY
/PAU SE
CC
MTS
GOTO
SUB TITLE
ZOO M
ANG LE
PRO GAM
INT RO
PEP EAT
AB
STOP
SLO W/STE P
AUD IO
CH+
VOL -
CH-
VOL+/-
CH+/-
Press to increase/decrease the sound level.
Press to scan through channels. To scan quickly
channels, press and hold down either+/-button.
7
Page 10
Menu Operation
Menu Operation
Basic operation
Intitial Setup Menu
NOTE: If this is the first time you run the LCD TV, the Initial Setup Menu will appear in the picture, and
the items of this menu also exist in other menus, so you are able to change the values after you
set them up.
Tuning Band
Initial Setup Menu
Menu Language
Auto Ch Search
English
Air
To Move To Select To Exit
Enter
Menu
Menu Language
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.
Auto Ch Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.
Tuning Band
Select Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)
If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.
The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides
graphical presentation.
Choosing a TV channel
1. Press CH+/CH- button on the front panel or on the remote control.
Press CH+ button for the next channel
Press CH - button for the previous channel.
2. Press 0-9 buttons and -/-- button.
You can select the channel by pressing 0 to 9 buttons directly for the channel you want.
3. Example:
To select 1-digit channel (e.g. Channel 5): Press the 5 and ENTER button.
To select 2-digit channel (e.g. Channel 20): Press the 2 and 0 buttonts,then press ENTER button.
To select 3-digit channel (e.g. Channel 103): Press the 1 and 0 and 3 buttons,then press ENTER button.
Note: After select the digit button, the digit will be memorized.
Press the button to enter a program number for digital program channel.-/--
To select a program number for multiple program channel (e.g. Channel 2-1):Press the 2 button, then press -/-- and 1
button,then press ENTER button.
8
Page 11
Menu Operation
Volume adjustment
1. Press VOL+/- to adjust the volume.button
2. Press MUTE( ) button to mute the TV, Press MUTE( ) button again or VOL+/- button to cancel the mute function.
Volume 40
OSD Adjustment
- Press MENU button to display the main menu.
- Press buttons to select the available menus. ◄/►/▲/▼
Picture
Audio
Setup
Feature
To Move To Select To Exit
Enter
Picture Mode
Menu
Contrast 50
Brightness 50
Sharpness 50
Color 50
Tint 50
Aspect Ratio
Standard
Full screen
Audio
Setup
Feature
Audio Mode
Audio Language
Bass 50
Treble 50
Balance 0
Voice
Picture
English
Audio
Setup
Feature
Tuning Band
Signal Level
Auto Channel Search
Add On SearchChannel
Manual SetChannel
Channel Labels
Air
Picture
Menu Language
English
Audio
Setup
Feature
Time Set
Sleep Timer
Advanced Video Menu
Parental Control
Picture
Off
Closed Caption
Reset
To Move To Select To Exit
Enter
Menu
To Move To Select To Exit
Enter
Menu
To Move To Select To Exit
Enter
Menu
The OSD ( On Screen Display) in this document may be different from your TV’s, because this is just an
reference for your product.
9
Page 12
Menu Operation
Picture menu options
Contrast
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the contrast of the picture.
Brightness
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the brightness of the picture.
Sharpness
Color
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the color saturation of the picture.
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the sharpness of the picture.
Select Picture Mode in PICTURE menu. (Available picture mode: Standard, Vivid, Bright, User.)
You should set the Picture Mode to “User” first if you want to change the value of Contrast/Brightness/Sharpness/Color/Tint,
TIPS: you can select the picture mode directly by pressing PMODE button repeatedly.
Picture Mode
Tint
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the tint of the picture.
Aspect Ratio
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the aspect ratio of the picture.
(Available aspect ratio: FullScreen, Normal, Zoom, Wide, Cinema, Waterglass.)
NOTE: The Tint item is not available but in NTSC color system.
Press MENU button on the front panel or the remote control to
display the main menu.
Press ▲/▼ button to select the PICTURE menu, then press
► button for the submenu.
Press ▲/▼ button to select the item you want to adjust.
Press ENTER/► button repeatedly to adjust the value.
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
Picture
Audio
Setup
Feature
To Move To Select To Exit
Enter
Picture Mode
Menu
Contrast 50
Brightness 50
Sharpness 50
Color 50
Tint 50
Aspect Ratio
Standard
Full Screen
Contrast 50
Selecting input source
You can select the input source by pressing input button on the remote control or on the front panel.
To Move To Select To Exit
Enter
Menu
TV
S-Video
Composite
Component
VGA
HDMI
DVD
Sourc e list
10
Page 13
Menu Operation
Audio Language
Bass
Treble
Balance
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the sound balance.
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the bass value.
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the Treble value.
Setup menu options
Audio Mode
Tuning Band
Audio
Setup
Feature
Audio Mode
Audio Language
Bass 50
Treble 50
Balance 0
Voice
Picture
English
To Move To Select To Exit
Enter
Menu
AUDIO menu options
Press MENU button on the front panel or the remote control to
display the main menu.
Press ▲/▼ button to select the AUDIO menu, then press
► button for the submenu.
Press ▲/▼ button to select the item you want to adjust.
Press ENTER/► button repeatedly to adjust the value.
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
Select Audio Mode in AUDIO menu. (Available audio mode: .)
You should set the Picture Mode to “User” first if you want to change the value of Bass/Treble.
TIPS: you can select the picture mode directly by pressing SMODE button repeatedly.
User/Voice/Concert/Jazz
Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the audio language.
NOTE: This item will be unavailable if the program system does not provide several audio languages.
Press MENU button on the front panel or the remote control to
display the main menu.
Press ▲/▼ button to select the SETUP menu, then press
► button for the submenu.
Press ▲/▼ button to select the item you want to adjust.
Press ENTER/► button repeatedly to adjust the value.
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
Select Tuning Band mode. (Available tuning band mode: Air, Cable STD, Cable HRC, Cable IRC, Cable Auto.)
If sets Air, the range of channel is 2-69, and if sets Cable,the range of channel is 1-135.
Audio
Setup
Feature
Tuning Band
Signal Level
Auto Channel Search
Add On SearchChannel
Manual SetChannel
Channel Labels
Air
Picture
Menu Language
English
Reset
To Move To Select To Exit
Enter
Menu
11
Page 14
Menu Operation
Auto Channel Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Auto Channel Search Program.
Add On Channel Search
Press ▼ / ▲ button to select this item, then press ENTER/► button to enter the Add On Channel Search Program.
Manual Channel Set
Press ENTER button to display a channel list that you can select channel as below:
To Move To Change To Select
Enter
Manual Channel Set Menu
Ch 42 -1 ATSCdmo Viewable
Ch 2 -0 Viewable
Ch 11 -0 Viewable
Ch 22 -0 Viewable
Ch 31 -0 Viewable
Ch 52 -0 Viewable
Ch 54 -0 Viewable
Ch 66 -0 Viewable
Ch 68 -0 Viewable
Channel labels
Allows you to name the channel selected. press ◄/► button to select the position of letter, press ▲/▼ button to set the name.
Channel Labels Menu
To Exit
Exit
Ch 42-1 ATSC dmo
Analog Found
Auto Ch Search - Air
Performing First Pass
Digital Found
Scanning
Progress(%) 12
2
0
To Exit
Exit
To Move To Change
Signal Level
In DTV mode, you can refer the strength of the current channel ,and you can tune manually and adjust the angle, orientation of the antenna etc.
Contrast 80
Weak Normal Good
Analog Found
Add On Ch Search - Air
Performing First Pass
Digital Found
Scanning
Progress(%) 12
2
0
To Exit
Exit
This function will add the channels not found before, and will not delete the channels unavailable at present.
Menu Language
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the OSD language.
12
Page 15
Menu Operation
Feature menu options
Time Set
Press ▼ / ▲ button to select this item, then press ENTER/► button for Time Set Menu.
Time Zone
Time Set Menu
Time Set Mode
Year
Date
Time
Auto
Pacific
Mar 29
10:00 AM
2008
Time Set Mode
Press ENTER/► button to select the time set mode from AUTO and MANUAL.
(Available aspect ratio: FullScreen, Normal, Zoom, Wide, Cinema, Waterglass.)
You should set the Time Set Mode to “Manual” first if you want to change the value of Time Zone/Year/Date/Time.
Time Zone
Press ▼ / ▲ button to select this item, then press ENTER/► button to select the time zone for your TV.
Sleep Timer
Select the sleep time to put automatically the TV in standby mode. Timer can be selected
60min/90 min/120 min/180 min/240 min/Off.
Also you can select the sleep time by pressing SLEEP button repeatedly..
as 5min/10min/15min/30min/45min/
Advanced Video Menu
Press ▼ / ▲ button to select this item, then press ENTER/► button for Advanced Video Menu.
Advanced Video Menu
Noise Reduction
Medium
Normal
On
Press MENU button on the front panel or the remote control to
display the main menu.
Press ▲/▼ button to select the FEATURE menu, then press
► button for the submenu.
Press ▲/▼ button to select the item you want to adjust.
Press ENTER/► button repeatedly to adjust the value.
When you are satisfied with your choice, press ◄ button to go
to the previous menu, or press MENU/EXIT button to exit.
Audio
Setup
Feature
Time Set
Sleep Timer
Advanced Video Menu
Parental Control
Picture
Off
Closed Caption
To Move To Select To Exit
Enter
Menu
To Move To Exit
Exit
To Select
Enter
Color Temperature
3D Y/C
Adaptive Contrast
Gradient Enable
Blue Screen
Audio Only
On
On
On
To Move To Exit
Exit
To Select
Enter
Reset
Press to reset all items to the default value. ENTER/► button
OK Cancel
Reset ALL?
13
Page 16
Menu Operation
are unrated program.
Adaptive Contrast
Press ENTER/◄/► button to set the Adaptive Contrast on or off.
Gradient Enable
Blue Screen
Audio only:
Press ENTER/◄/► button to set the Gradient Enable on or off.
Press ENTER/◄/► button to set the Blue Screen on or off.
Enter Password
*
Parental Control
You need to enter the password for the submenu. And the original password is 0000.
To Move To Select To Exit
Enter
Exit
Parental Control Menu
Password Set
Master Lock
Unrated lock
US Ratings
Canadian Rating
Advanced Rating
On
On
Password Set
You need to enter the correct old password before setting a new password, and after set the new password, you need to
enter it again to confirm it.
Master Lock
Press ENTER/► button to set the Master Lock on/off, if you set this function on, all the parental control lock will be
unavailable and it can play all kinds of programs.
Enter Old Password
*
Enter New Password
*
Confirm New Password
*
Noise Reduction
Press ENTER/◄/► button to select the level of noise reduction from Off/Low/Medium/High.
Color Temperature
Press ENTER/◄/► button to select the color temperature from Cool/Normal/Warm.
3D/YC
Press ENTER/◄/► button to set the 3D/YC on or off.
Unrated Lock
Press ENTER/► button to set the Unrated Lock on/off, if you set this function on, all the programs will be locked even they
On
Press ENT ER /button t o tu rn off th e video pictu re ,liste n th e audio onl y.
14
Page 17
Menu Operation
Analog CC
Closed Caption
CC Mode
Digital CC
Advanced CC Settings
CC Off
CC1
CS1
To Move To Exit
Exit
To Select
Enter
Closed Caption
Press ▼ / ▲ button to select this item, then press ENTER/► button for Closed Caption Menu.
CC Mode
Press ENTER/► button to select CC Mode from CC Off / CC On / CC Mute.
Analog CC
Digital CC
Advanced CC Settings
Press ENTER/► button to select Analog CC Mode.
Press ENTER/► button to select Digital CC Mode.
Press ENTER/► button for Advanced CC Settings Menu.
Size
Digital Closed Caption
Style
Font
Text Color
Automatic
Automatic
Text Opacity
Background Color
Background Opacity
Edge Effect
Edge Color
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
Automatic
CC SAMPLE
To Move To Exit
Exit
To Select
Enter
US Ratings Menu
MPAA TV Rating
NONE
G
PG
PG-13
R
NC-17
X
Canadian Rating Menu
Canadian English Candlan French
E
C
C8+
G
PG
14+
18+
E
G
8 ans+
13 ans+
16 ans+
18 ans+
To Move To Exit
Exit
To Select
Enter
NONE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ALL L S VFVD
To Move To Exit
Exit
To Select
Enter
US Ratings
Press ▼ / ▲ button to select this item, then press ENTER/► button for US Ratings Menu.
Canadian Rating Menu
Press ▼ / ▲ button to select this item, then press ENTER/► button for Conadian Rating Menu.
- Style:
you want to change the value of items below.
- Size: Normal/Large and Small.
- Font: From Font1 to Font7.
- Text Color: Red/Green/Blue/Yellow/Magenta/Cyan/Black/White.
Press ENTER/► button to select CC Style between Automatic and Custom, you need to set it to Custom first if
Advanced Rating
Press ▼ / ▲ button to select this item, then press ENTER/► button to set advanced rating on/off.
15
Page 18
Menu Operation
- Text Opacity: Solid/Flashing/Transparent/Translucent.
- Background Color: Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.
- Background Opacity: Solid/Flashing/Transparent/Translucent.
- Edge Effect: None/Raised/Depressed/Uniform/Left Shadow/Right Shadow.
- Edge Color: Black/White/Red/Green/Blue/Yellow/Magenta/Cyan.
Feature menu options in VGA
Press Input button to select the input source to VGA.
Audio
Setup
Feature
To Move To Select To Exit
OK
Time Set
Menu
Sleep Timer
Advanced Video Menu
Picture
Off
VGA Set
VGA Set
Press ▼ / ▲ button to select VGA Set, then press ENTER/► button for VGA Setting Menu.
To Move To Select To Exit
OK
Menu
VGA Setting-1024x768@70Hz
Auto Adjust
Setting
Preset
H-Position
50
V-Position
50
Clock
50
Phase
50
Phase
Press ENTER/► button to adjust the phase of the picture.
Clock
Press ENTER/► button to adjust the clock of the picture.
V-Position
Press ENTER/► button to adjust the vertical position of the picture
H-Position
Press ENTER/► button to adjust the horizontal position of the picture.
Auto Adjust
Setting
Press ENTER/► button to auto adjust the VGA setting.
Press ENTER/► button to reset the VGA setting to factory default.
16
Page 19
Menu Operation
Audio
Setup
Feature
To Move To Select To Exit
OK
Time Set
Menu
Sleep Timer
Advanced Video Menu
Picture
Off
Component Set
Component Set
Press ▼ / ▲ button to select Set, then press ENTER/► button for Setting Menu.Component Component
To Move To Select To Exit
OK
Menu
Auto Adjust
Setting
Preset
H-Position
50
V-Position
50
Clock
50
Phase
50
Phase
Press ENTER/► button to adjust the phase of the picture.
Clock
This function is unavailable in component mode.
V-Position
Press ENTER/► button to adjust the vertical position of the picture
H-Position
Press ENTER/► button to adjust the horizontal position of the picture.
Auto Adjust
Setting
This function is unavailable in component mode.
Press ENTER/► button to reset the Setting to factory default.Component
Component Setting-720x480I@30/29.97Hz
Feature menu options in Component
Press Input button to select the input source to component.
17
Page 20
DVD Operation
DVD Operation
Tit le : DV D Video discs are usually divided into several numbered sections called titles.
Chapter: A title comprises smaller numbered sections called chapters.
Play ing the DVD Pla yer
1. Press the ‘SOURCE button to select ‘DVD’ mod e, i f no d is c is i ns er te d ye t, t he d is pl ay s ho ws ‘ No D is c’ .
2.Insert a DVD with the label printed side facing towards you.
3.The TV will first display ‘Loading’, then change to ‘DVD-video’. Most DVDs will show some preliminary
information then stop at a main menu screen.
4. Press PLAY/PAU SE t o pl ay i t di re ct ly. Or press the DVD-MENU button to access the disc menu during
playback.
5.Use the direction button on the remote control to select the desired option. Press ENTER to select the
option or press the button. Playback will now commence.
6.After playback, press the EJECT button on remote control or EJECT but to n on TV/DVD to remove the
disc.
Note: No function‘’ wil l so me ti me s ap pe ar o n th e sc re en a ft er a b ut to n is p re ss ed . This indicates that the
function is not supported at the current time.
►
Gett ing Started
Carefully remove the TV / DVD and all other items from the box. You may wish to store the packaging for
future use.
Please read these instructions thoroughly before use.
Compatible Discs
The DVD player supports the following disc formats:
12cm DVD Video Discs.
12cm Compact Disc Audio Discs.
12cm Still High Resolution
WARNING! DO NOT INSERT OR PLAY 8CM DISCS, THEY WILL GE T ST UC K.
Basic Control Function
Play/Pause
1.Press the ► button to play/ pause the DVD. The screen will freeze its current picture when paused.
2. For resume play, press the ► button.
Stop
After pressing the button to stop playback. 'Press Play Key To Continue' will be displayed on the top left
on the screen, also '■' on the top right. Press the► button to resume playback.
Press the''button twice to stop playback completely. '' Will be displayed on the screen.
Fast Playback
You ca n se ar ch e it he r fo rw ar ds o r ba ck wa rd s fo r a pa rt ic ul ar p ar t of t he D VD .
To search forwards, press the buttons►►.
The playback speed is doubled and 'FORWARD X2' is displayed.
Each subsequent press of the ►►button toggles among different speeds (►►2X - ►►4X - ►►8X ►►16X - ►►32X -PLAY),up to 32 times the normal speed. Pressing the buttons ►► after '' ►►3 2X '
reverts to normal playback speed.
To resume normal playback at any time, press the► buttons.
To search backwards, press the button. This operates in the same way as the ►►button but in the
reverse direction.
Subtitles
Most DVDs are recorded with subtitles and some have the subtitles available in different languages.
To select subtitles, press the SUB-T button.
If different languages are available, repeatedly press the SUB-T bu tt on u nt il t he l an gu ag e yo u re qu ir e is
displayed.
18
Page 21
DVD Operation
Chapter Selection
During playback you can select different chapters of the DVD.Press DVD-MENU to the root menu.
Press direction buttons or Next, PREVIOUS buttons to choose different chapters. Note: It is just for
reference.
Press ENTER button to confirm.
Audio Configuration
Some DVDs are recorded with multiple audio channels. These can be used for different languages or for
commentaries.
Repeatedly press the AUDIO button to select the desired audio channel.
Repeat Chapter/Title
To repeat playback of a chapter, press the REPEAT button while the chapter is playing. 'Chapter' will be
displayed.
To repeat playback of the title, press the REPEAT button twice.
To repeat playback of the title, press the REPEAT button three times.'All' will be displayed.
Press the REPEAT button four times to cancel repeat playback.
Note: Some discs do not support the repeat function, different disc shows different information.
'Title' will be displayed.
Program Play
1. Compatible with DVD, CD, HD-CD, WMA, Digital Audio disc /JPEG discs.
2. The Program Playback option allows you to enter the order in which you want chapters or tracks to play,
maximum to 16.
3. Program Menu: If PBC is on, this operation will turn PBC off while the chapters / tracks play in programmed
order.
4. According to the highlight, use the Numeric buttons to enter the chapters / tracks in the order you want
them to play. Then press Play or use Arrow buttons to highlight the "PLAY" item and press Enter. The
chapters /tracks will play in the programmed order. You can program maximum 16 titles / chapters / tracks.18
5. According to the Direction Indicator on the menu, you can press Arrow buttons to highlight where youwant to
enter.
6. During Program Playback, if program button is repressed, the program order and the contents will be
displayed on the screen, and the Program Playback will be stopped; also you can press Stop and
Play to resume normal playback.
7. Notes:
To clear the program order, use Arrow buttons to highlight the "CLEAR" item, then press Enter.
To modify the program order, use Arrow buttons to highlight the item you are changing and enter the
new chapter / track you want to program directly.
8. The program indicator in the screen and the playing chapter / track illuminate.
General Setup Page
Press SOURCE button on the remote control ,then select DVD item in Sou rce list
a. Press DVD-SETUP button on remote control during playing DVD, it will show following menu:
(When the DVD menu displayed ,the DVD system will auto pause. Press SETUP again, it will go on)'
b. Press “▼/▲”to choose the items, then enter the desired item with ENTER button. It has been set
already when the desired item becomes red.
Note: Press Left button to get back the previous menu.
c. Press SETUP to exit the menu.
OSD Menu In DVD Mode
19
Page 22
DVD Operation
Aud io S et up P ag e
a. Press SETUP button on remote control during playing DVD, Press “ ” until it will show following menu:
(When the DVD menu displayed ,the DVD system will auto pause. Press SETUP again, it will go on)'
b. Press “▼/▲”to choose the items, then enter the desired item with ENTER button. It has been set already
when the desired item becomes red.
Note: Press Left button to get back the previous menu.
c. Press SETUP to exit the menu.
d. The items of the menu as below:
Downmix: choose the downmix mode. There is only one item--stereo.
◄/►
Preference Page
a. Press SETUP button on remote control during there no disc in the DVD player , Press “ ” until
Preference will show following menu:(When the DVD menu displayed ,the DVD system will auto pause.
Press SETUP again, it will go on)'
b. Press “▼/▲”to choose the items, then enter the desired item with ENTER button. It has been set already
when the desired item becomes red.
Note: Press Left button to get back the previous menu.
c. Press SETUP to exit the menu.
d. The items of the menu as below:
◄/►
20
OSD Lang.: Set the language of OSD menu. Default setting is English.
Last Memory: set it on to memorize the last stop point. During playing the DVD, you change to other
mode. When you come back to DVD mode, it can play automatically from the last stop point.
d. The items of the menu as below:
Page 23
Disc Care
About Disc Terms Tit le
Generally, pictures or music compressed on a DVD are divided into several sections, "title".
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one
or more chapters and each of them is numbered for easy searching, but some discs may not have a
recording chapter.
Track
A segment of picture or music on a CD, Each track is numbered for searching.
Care of Disc
Video disc contains high-density compressed data that needs proper handling.
1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.
2.Do not bend or press the disc.
3.Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry
condition.
Prevent exposure to:
Direct sunlight
Heat or exhaust from a heating device
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from
center toward the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning
fluids will permanently damage the disc surface.
21
Audio；Choose the default language you would prefer to for DVD titles.
Subtitle: Set the language of subtitle menu or turn off the Subtitle.
Note: not all DVD discs are recorded or offer subtitles in multiple language.
Disc Menu: set the default language of Disc menu.
Parental: movies rated higher than the level set will not be played by selecting a certain access level. The
parental lock can only be changed after input the correct password.
Note: This function is available only when the discs have rating encoded on.
It will ask a password when you select a level except for Adult. The factory setting of the password is
136900. Press Down button to the 'OK' after finishing input of the password, then press ENTER button to
confirm and go back to the previous menu.
Password: Reset the password. The password should be 4-digit, and the initial password is 136900
(It is also the supercode).
Note: Press Down button to the 'OK' after finishing input of the password, then press ENTER button to
confirm and go back to the previous menu.If you forget the old password, you can always use the factory
setting password '136900'.
Default: Default the factory' settings EXCEPT the password.
Disc Care
Page 24
Simple Troubleshooting
Simple Troubleshooting
22
Page 25
Techincal Specifications
Power Consumption
TV
TV System
Screen siz e
Resolution
Aerialinput
Audio output power
45W
ATSC/NTSC
15"(diagonal)
1280x800pixels (RGB)
75 (unbalanced)
2x3 W
Remote control
Type
Control distan ce
Control angle
Batteries
Weight
infrared
5m
30° (horizontal)
2 x 1.5 V, size AAA
70 g (without batt ery)
Techincal Specifications
23
Loading...