Culligan 180, 600, 750, 450, 300 User Manual

More

More

More

HI-FLO® 52

AUTOMATIC WATER SOFTENERS

SPECIFICATIONS AND OPERATING DATA

MODELS Model 180 Model 300 Model 450 Model 600 Model 750 Model 900

Capacity
Maximum pounds 90 150 225 30 0 375 450
@ Salt Dosage grams @ 11,664 19,440 29,160 38,879 48,599 58,320

Capacity1, grains @ 120,000 200,000 300,000 400,000 500,000 600,000
Minimum pounds 36 60 90 120 150 180
@ Salt Dosage grams @ 7,776 12,960 19,440 25,920 32,400 38,880

Service Flow,
Continuous m
Service Flow, gpm 9 5 108 12 0 125 123 125
Peak
Pipe Size, NPTI i n 2 2 2 2 2 2
Resin Volume cu. ft. 6 10 15 20 25 30

Media Tank, dia. x ht. in 20 x 54 24 x 54 30 x 54 36 x 60 36 x 60 42 x 60
Steel cm 51 x 137 61 x 137 76 x 137 91 x 152 91 x 152 107 x 152
Fiberglass in 21 x 69 24 x 72 30 x 72 36 x 72 NA NA

Brine Tank, in 24 x 48 30 x 48 30 x 48 36 x 48 42 x 48 42 x 48
dia. x ht. cm 61 x 122 76 x 122 76 x 122 91 x 122 107 x 122 107 x 122
Ship. Wt., approx. pounds 730 1050 1580 2050 2400 2750
Steel kilograms 330 480 720 940 1090 1 195
Fiberglass pounds 570 860 1250 1600 NA NA

1

, grains @ 180,000 300,000 450,000 600,000 750,000 900,000

kilograms 4 1 68 102 136 170 20 4

kilograms 1 6 27 41 54 68 82

2

34

gpm 67 78 90 97 95 104

3

/hr 15 18 20 22 22 24

m3/hr 22 25 27 28 28 28

liters 170 283 425 566 7 08 850

cm 53 x 175 61 x 183 76 x 183 91 x 183 NA NA

kilograms 260 390 570 730 NA NA

1 Exchange capacities based on treating water containing 10 grains per gallon of hardness (expressed as calcium carbonate), free of color, oil, turbidity and at

a continuous flow rate of approximately 50 percent of the peak flow rate. These are nominal capacities and will vary with influent water characteristics, water

temperature, and other factors.
2 Continuous flow at 15 psi (103 kPa) pressure drop.
3 Peak flow at 25 psi (172 kPa) pressure drop.
4 Operation of a softener at peak flow rate for extended periods of time may result in a slight reduction of softening capacity. This is due to premature

hardness breakthrough.
NOTE: Operational, maintenance and replacement requirements are essential for this product as advertised.

Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0075

Moore Part No.46945