Cuisinart GAS0356AS, GAS0356ASO User Manual

Twin Oaks Dual Function Grill

ASSEMBLY IN STRUC TIONS

Model GAS0356AS / GAS0356ASO

ASSEMBLY INSTRUCTIONS:

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY

BEFORE ASSEMBLING OR OPERATING YOUR GRILL.

WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT.

The following tools are required to assemble this Cuisinart Twin Oaks Pellet Grill:

• Phillips Screwdriver

• Pliers or Wrench

PARTS LIST:

1

1 Top Front Panel

2

1 Bottom Front Panel

3

1 Right Front Leg

4

1 Left Front Leg

5

1 Right Side Front Panel

6

1 Left Side Front Panel

7

1 Left Side Panel

8

1 Cart Brace

9

1 Cart Base

10

1 Left Rear Leg

11

1 Back Panel

12

1 Right Rear Leg

13

1 Grill Body

14

2 Hood Handles

15

1 Control Knob

16

1 Griddle

17

1 Side Burner Grate

18

1 Right Side Table

19

1 Left Side Control Panel

20

1 Right Side Control Panel

21

1 Grease Cup

22

2 Warming Racks

23

1 Ash Catcher

24

4 Casters

25

4 Cooking Grates

26

1 Cord Wrap

27

1 Heat Baffle

28

1 Heat Plate

29

3 Heat Tents

30

1 Grease Tray

31

1 Auger Housing

32

2 Accessory Hooks

33

1 Tank Block Bar

Note: Most hardware is pre-attached to the grill. You may need to loosen some screws
partially while others may need to be removed in order to assemble parts. The screws that
you remove will be re-used so don’t misplace this hardware.

Extra screws are included in a small bag with the owners manual.

1

16

14

17

13

18

19

21

27

7

25

28

11

10

22

20

23

29

30

12

1

2

15

26

31

8

32

33

4 3

6

9

24

5

2

Step 1

• Remove 2 screws

• Attach FRONT PANELS

1

and 2

• Tighten 2 screws

1

2

Step 2

• Loosen 6 screws 3-4
turns on FRONT LEGS

3

• Do not remove screws

• Attach FRONT PANELS

1

• Tighten 6 screws

4

and

and 2 using keyholes

1

2

4

3

3

NOTE: Before tightening keyhole

screws, make sure panels are aligned.

Step 3

• Loosen 6 screws 3-4
turns on FRONT LEGS

3

1

and

4

2

5

3

4

6

• Do not remove screws

• Attach RIGHT SIDE

FRONT PANEL

5

and

LEFT SIDE FRONT
PANEL

6

• Tighten 6 screws on

RIGHT SIDE FRONT
PANEL
SIDE FRONT PANEL

5

and LEFT

6

Step 4

• Loosen 2 screws

1

5

3

2

4

6

7

• Attach LEFT SIDE
PANEL

7

• Tighten 2 screws on

LEFT SIDE PANEL

7

4

Step 5

• Loosen 2 screws

• Attach CART BRACE

• Tighten 2 screws on
CART BRACE

• Remove 4 screws

8

1

8

5

8

3

2

4

6

7

Step 6

• Attach CART BASE

• Tighten 4 screws

(Removed from
Step 5)

Remove 2 screws

Remove 2 screws

9

8

1

5

3

2

4

6

7

5

9

Step 7

• Loosen 9 screws on

REAR LEGS 10 and 12

10

Remove 2 screws

11

12

Remove 2 screws

• Attach BACK PANEL
to REAR LEGS

12

10

and

• Tighten 5 screws

• Remove 4 screws

Step 8

11

12

11

9

• Attach CART BASE

to

rear legs

9

• Tighten 4 screws
(Removed from Step 7)

10

6

Step 9

• Attach LEFT SIDE
PANEL
BRACE

• Tighten 4 screws

6

and CART

8

Tighten

4 screws

7

8

Step 10

• Lock CASTERS 24

• Attach CASTERS
legs

24

unlocked

locked

24

CASTERS

to

7