Page 1
Deluxe Two Burner Gas Grill
ASSEMBLY IN STRUC TIONS
Model GAS0256AS / GAS0256ASO
Page 2
ASSEMBLY INSTRUCTIONS:
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING OR OPERATING YOUR GRILL.
WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEM BLING THIS UNIT.
The following tools are required to assemble this Cuisinart 2 Burner Gas Grill:
• Phillips Screwdriver
PARTS LIST:
1
1 Right Front Leg
2
1 Front Panel (3 parts)
3
1 Left Front Leg
4
2 Side Panels
5
1 Cart Base
6
1 Right Rear Leg
7
1 Left Rear Leg
8
2 Heat Tents
9
1 Tank Holder
10
1 Grease Tray
11
1 Grease Cup
12
2 Cooking Grates
13
1 Warming Rack
14
1 Right Side Table
15
1 Left Side Table
16
1 Grill Body
17
4 Casters
18
2 Right Side Table Brackets
19
2 Left Side Table Brackets
Note: Most hardware is pre-attached to the grill. You may need to loosen some screws
partially while others may need to be removed in order to assemble parts. The screws that
you remove will be re-used so don’t misplace this hardware.
Extra screws are included in a small bag with the owners manual.
1
Page 3
15
19
16
13
18
14
11
17
7
4
2
3
12
10
8
6
4
1
5
9
2
Page 4
Step 1
• Remove 4 screws
• Attach FRONT
PANEL parts
• Install 4 screws
2
FRONT PANEL
2
2
2
Step 2
• Loosen 10 screws
• Attach FRONT
LEGS and
1
• Tighten 10 screws
on FRONT LEGS
1 3
and
3
1
3
3
NOTE: Before tightening keyhole
screws, make sure panels are aligned.
Page 5
Step 3
• Loosen 4 screws
• Attach SIDE
4
4
PANELS
• Tighten 4 screws
on SIDE
PANELS
4
4
Step 4
• Remove 4 screws
from FRONT
LEGS and
31
31
Remove 2 screws
Remove 2 screws
4
Page 6
Step 5
• Remove 4 screws
from CART BASE
5
5
CART BASE
Step 6
• Attach TANK
HOLDER to
CART BASE
with 4 screws
(Removed from
Step 5)
9
5
9
5
CART BASE
5
Page 7
Step 7
1
3
• Attach CART
BASE to
5
FRONT LEGS
1
and
3
• Tighten 4 screws
on CART BASE
5
(Removed from
CART BASE
5
Step 4)
Front of Grill
Tighten 4 screws
Back of Grill
Step 8
• Remove 4 screws
from REAR LEGS
6 7
and
7
6
Remove 2 screws Remove 2 screws
6
Page 8
Step 9
• Loosen 4 screws
• Attach SIDE
PANELS to
REAR LEGS
and
• Tighten 4 screws
on SIDE
PANELS
4
6
7
4
4 4
7
6
Step 10
• Attach CART
BASE to REAR
LEGS and
• Tighten 4 screws
(Removed from
Step 8)
5
6 7
6
5
CART BASE
7
7
Page 9
Step 11
• Lock CASTERS
• Attach CASTERS
17
to legs
CASTERS
unlocked
locked
17
17
Front Legs
Step 12
• Loosen 6 screws
on all 4 legs
• Rotate
FRONT CART
BRACKETS
upwards and
tighten screws
• Slide REAR
CART
BRACKETS
upwards and
tighten screws
Rear Legs
8
Page 10
Step 13
• Remove 14 screws
Remove 14 screws
Step 14
• Set GRILL BODY
16
on cart (Use two
people)
GRILL BODY
16
9
Page 11
Step 15
• Tighten 3 screws
(Removed in
Step 13)
GRILL BODY
Tighten screws
16
Step 16
• Tighten 3 screws
(Removed in
Step 13)
GRILL BODY
Tighten screws
16
10
Page 12
Step 17
• Attach RIGHT
SIDE TABLE
BRACKETS
and LEFT
SIDE TABLE
BRACKETS to
GRILL BODY
18
19
16
18
16
16
• Tighten 8 screws
(Removed in
Step 13)
Step 18
• Remove 4 screws
from SIDE TABLE
BRACKETS
19
and
• Attach LEFT SIDE
TABLE on
post and replace
screws through
slotted hole
18
15
19
SIDE TABLE
BRACKETS
18
Remove 4 screws
19
11
15
LEFT SIDE
TABLE
Page 13
14
RIGHT SIDE
TABLE
Step 19
• Attach RIGHT
SIDE TABLE
on post and
replace screws
through slotted
hole
14
10
Step 20
• Remove 2 screws
on GREASE
TRAY
• Move handle to
outside attach with
2 screws
10
12
Page 14
Step 21
• Insert GREASE
TRAY and
GREASE CUP
10
11
10
11
Step 22
• Loosen screw on
HOSE HOOK and
rotate horizontal
• Place hose into
HOSE HOOK
• Tighten screw
13
Page 15
13
Step 23
12
• Install HEAT
TENTS ,
8
COOKING
GRATES and
12
WARMING
8
RACK
13
Model GAS0256AS Assembled
AI0256AS/ASO
1019
©2019 The Boltz Group LLC
Carrollton, Texas 75006 U.S.A.
Assembly Instructions for Models
GAS0256AS / GAS0256ASO
Loading...