For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
BFP-10 Series
U IB-7176
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions
should always be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put motor
base of PowerBlend Duet™ appliance in water or other liquid.
3. Close supervision is necessary when any appliance is used by
or near children. Cuisinart does not recommend the use of this
appliance by children.
4. Always unplug from outlet when not in use, before putting on or
taking off parts, and before cleaning or removing contents from
blender jar or food processor work bowl.
WARNING: Never put hands into the blender jar/food
processor work bowl or container, or handle the blades
with appliance plugged in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to nearest Cuisinart service
facility for examination, repair, and/or mechanical or electrical
adjustment.
7. The use of attachments, other than those recommended by
Cuisinart, including canning or ordinary jars not recommended
or sold by Cuisinart, may cause fire, electrical shock, or risk of
injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch hot
surfaces, which could damage the cord.
10. Keep hands and utensils out of jar/food processor work
bowl during use, to reduce the risk of severe injury to
persons or damage to appliance itself. A rubber or plastic
spatula may be used but must be used only when the appliance
is turned OFF.
11. When motor base is in ON mode, and LED lights are flashing or
glowing, do not touch cutting assembly, interfere with blade
movement or remove blender jar cover. Accidentally touching a
speed button may activate the blender.
12. BLADES ARE VERY SHARP. HANDLE CAREFULLY.
Store out of reach of children.
13. To reduce the risk of injury, never place chopping blade/cutting
assembly on base unless the blender jar or food processor
work bowl is properly attached.
14. Always operate blender or food processor with the cover in
place.
15. Never leave your blender or food processor unattended while it
is running.
16. When blending HOT liquids in blender jar, remove
measured pour lid (center piece of cover) to allow
steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may result
in fire, electrical shock, or personal injury.
19. Regarding your cord set: A longer cord has been provided so
that you will have flexibility in positioning your Cuisinart®
PowerBlend Duet™ near an electrical outlet. Exercise care when
using the longer cord to avoid entangling or tripping over the
cord. The longer cord should be arranged so that it will not
drape over the counter or tabletop, where it can be pulled on by
children or tripped over. Excess cord should be stored in the
cord storage area at the back of the blender base, to avoid
injury caused by the longer cord.
20. Be certain the food processor cover is securely locked in place
before operating appliance. Never operate without the cover
locked securely in place.
21. Do not attempt to defeat the food processor cover
interlock mechanism.
22. Never feed food into processor by hand. Always use the food
pusher.
23. Make sure the blade or disc has come to a full stop before
removing cover.
24. This food processor attachment is to be used only with
Cuisinart® BFP-10 series blenders. Do not use with any other
manufacturer’s blender base.
This appliance is intended for household use only.
2
25. Wash the blender jar, food processor work bowl, food
processor chopping blade, locking ring, and covers before
first use.
26. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK
OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER
SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE
DONE ONLY BY AUTHORIZED PERSONNEL.
27. WARNING: FLASHING LIGHT INDICATES READY TO
OPERATE. DO NOT TOUCH BLADES.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance has a polarized plug (one prong is wider than the
other). To reduce the risk of electric shock, this plug will fit into a
polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not modify
the plug in any way.
Maximum rating of 500 watts is based on the jar attachment, which
draws the greatest power. Other recommended attachments may
draw significantly less power.
UNPACKING INSTRUCTIONS
1. Place the gift box containing your Cuisinart® PowerBlend Duet™
on a flat, sturdy surface before unpacking.
2. Remove the instruction booklet and other printed material from
top of corrugated insert.
3. Next, remove the top corrugated insert containing the fill cap.
4. Carefully lift the blender base from box and set aside.
5. Carefully lift the top corrugated insert of the food processor
accessory. It containing the adapter stem, and slicing/shredding
disc. Carefully remove slicing /shredding disc as it is very sharp,
then remove adapter stem.
6. Remove the bottom corrugated insert containing the blender jar
assembly. Be careful not to tip the jar when removing.
7. Last, remove any additional literature from the box.
You’ll love everything your PowerBlend Duet™ lets you do. You can
prepare a whole meal in this combo blender/food processor. This
super-size blender and genuine Cuisinart® food processor have
preprogrammed functions to guarantee perfect results whether
you’re slicing cucumbers, chopping meat, or puréeing peaches.
Does the time consuming tasks, so you have time for
the fun stuff!
BLENDER PARTS AND FEATURES
1. 2-oz. Measured Pour Lid
Allows you to measure and add ingredients neatly without
removing the cover.
2. Cover
Just press on; no turning or twisting required. Tightfitting seal
resists leakage.
3. 56-oz. Glass Jar
Has a unique, sturdy, widemouth design.
4. Leakproof Rubber Gasket (not shown)
Holds the glass jar snugly in position for safe operation.
Is strong enough for all blender tasks, including tough jobs,
from ice crushing to chopping delicate herbs.
Note: Blades are very sharp...handle carefully.
6. Collar
Collar is self-aligning so that the glass blender jar slides easily
into position, eliminating the frustration of twisting and turning
the blender jar to lock it into place.
7. Heavy-Duty Motor Base
Motor base is so sturdy and stable, it will not “walk” on your
counter – even during ice crushing! The motor is strong enough
to handle all blending tasks, including crushing ice without
liquid, and is backed by a three-year limited warranty.
8. 7-Speed Touchpad Control
with Indicator Lights
Easy to use, read and clean.
Seven speeds give you great
versatility – use low speeds
for delicate blending all the way
up to high speeds for cheese,
garlic, or lemon zest. The red
LED lights clearly indicate what
blender speed you are using.
8a. Ice Crush Button
(Blender Only)
Activates the ice crushing speed.
This button is preset to the best
speed for crushed ice. However,
you can crush ice at any speed.
The food processor attachment
is not intended to crush ice.
Use the blender jar for this.
8b. Pulse Button
Allows you to pulse at any
speed from high to low, so
you can blend ingredients
only as much as needed.
8c. Food Processor Button
Is preset to the best speed for all food processing tasks.
Always use this button when food processing. This speed may
also be used with blender jar.
9. Slip-Proof Feet
Prevent movement during use and prevent damaging marks on
countertops or tables.
10. Hidden Cord Storage Compartment (not shown)
Keeps countertop safe and neat by conveniently storing
excess cord.
11. Impact-Resistant Plastic Housing
Is crafted of the finest quality materials to resist staining,
cracking, and odors.
12. Innovative Cuisinart Design
Combined with power, performance, sturdiness, and easy
cleanup, makes this blender a winner.
8b8c
1
2
3
6
7
8
8a
9
4
BLENDER ASSEMBLY
To use your Cuisinart® PowerBlend Duet™, begin by assembling
the blender jar.
d
c
b
a
4. Secure the rubber gasket and cutting assembly in position by
placing the smaller opening of the locking ring (d) on top of the
cutting assembly. Engage threads by twisting the locking ring
clockwise until tightened. Make sure locking ring is tightly
fastened to blender jar. Once assembled, turn the blender jar
right side up.
5. Push the cover onto the top of the blender jar. Push the
measured pour lid into the cover.
6. Place the blender jar on the motor base so that the jar markings
are facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.
1. Turn the blender jar (a) upside
down, and place it flat on a
sturdy surface.
2. Position the rubber gasket (b)
on the round opening on the
bottom of the blender jar.
3. Turn the cutting assembly (c)
upside down, and place the
blade end in the blender jar
opening.
Note: Blades are very sharp...
handle carefully.
HELPFUL REMINDERS
• Once the cover is in position, ingredients can be added during
blending by simply lifting the measured pour lid, adding
ingredients, and replacing the measured pour lid.
• Cover should always be in place while the unit is ON.
• Warning: Do not place blender jar on base while motor is
running.
• Do not twist locking ring from blender jar when removing
blender jar from base. Simply lift blender jar from motor base.
• Boiling liquid or solid frozen foods (with the exception of ice
cubes or ½" pieces of frozen fruit) should never be placed in
the blender jar.
• Do not place ice, frozen foods or very cold liquids in a blender
jar which has come directly from a hot dishwasher.
• Do not place very hot liquids or foods in a blender jar which
has come directly from the freezer. Boiling liquids should cool
for 5 minutes before being placed in blender jar.
• Follow Cleaning and Care instructions on page 7 prior to your
first use.
BLENDER OPERATING INSTRUCTIONS
1. Place the motor base of your Cuisinart® PowerBlend Duet™ on
a flat, sturdy surface. It is important that the surface be clean
and dry. Follow the instructions for assembling the blender jar
(see previous section). Once the jar is assembled and is in
position on the motor base, plug the Cuisinart® PowerBlend
Duet™ into an electrical outlet.
2. Add all necessary ingredients to the blender jar, and replace
the cover. You may add more ingredients by lifting the
measured pour lid and dropping ingredients through the fill
area. Replace the measured pour lid after adding ingredients.
Do not put hands into blender jar with blender plugged in.
NOTES: Add liquid ingredients first, then follow with solid
ingredients. This will provide more consistent blending
and prevent unnecessary stress on the motor.
To remove blender jar cover, lift edge of cover upward.
Lifting measured pour lid will not remove cover.
3. TO START BLENDING: Press the On button. The red On
LED light will flash, indicating that the blender is turned on
but no speed has been selected.
4. PRESS THE DESIRED BLENDING SPEED: Both the On
indicator light and the activated speed indicator light will glow.
The blender will now be functioning at the desired speed. It is
possible to switch speeds without pressing the Off button, by
simply pushing the next desired speed button.
5
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.