Cuisinart Automatic Cold Brew Coffeemaker REFERENCE GUIDE

TROUBLESHOOTING GUIDE
Problem Cause Solution
Water is pouring out onto the counter
The unit will not work
Coffeemaker lid is shaking during brew cycle
Coffee lter basket is lled with more water than usual after the release cycle has been completed
Coffee release lever is not in the lock position
Coffee lter basket is not in place
Coffee oils build up over time
Coffee is too dark and oily
• Slide coffee release lever to the Lock position
• Always keep coffee release lever in the Lock position before and after release cycle
• Press Brew button to pause the brew cycle
• Remove coffeemaker lid
• Make sure coffee basket lter twist-off lid is screwed on correctly
• Push coffee lter basket down until clicked into the water tank
• Replace coffeemaker lid and press the Brew button to continue the brew cycle
• Soak coffee lter basket in warm, soapy water for 30 minutes
• Soak coffee lter basket regularly to prevent oil buildup
• When using a very dark, oily bean, coffee may not drain as efciently as a regular roast or less oily bean
QUICK REFERENCE GUIDE
Automatic Cold Brew Coffeemaker
FEATURES
Coffeemaker Lid
Coffee Filter Basket Pop-Off Lid
Coffee Filter Basket Twist-Off Lid
Coffee Filter Basket
Removable Water Tank Removable Water Tank Filter
Measuring Scoop
Carafe Lid
Carafe Filter
7-Cup Glass Carafe
Coffee to water ratio is incorrect
Strength
setting Coffee is weaker than usual
The brew cycle has ended but no coffee is in the carafe.
The unit will not operate and the button indicator lights are ashing
PG-36551 ©2017Cuisinart
is incorrect
Oil buildup in
the coffee lter
basket can
prevent coffee
from ltering
properly
Coffee release
lever is in the
lock position.
The coffee lter
basket may be
jammed or not
in the correct
position
• Adjust coffee-to-water ratio to taste
• When using the MAX 16 scoops of coffee, reduce the amount of water
• Check your strength setting — selected strength indicator LED is illuminated
• To change your strength setting, press the desired
strength button
• Soak coffee lter basket in warm, soapy water for
30 minutes before running next brew cycle
• Soak coffee lter basket regularly to prevent oil buildup
• Avoid using a very dark, oily bean
• Slide coffee release lever to right so it is in the release position.
• The blue release indicator light will illuminate and coffee will begin to stream into the carafe.
• Press the brew button once to cancel the cycle
• Remove coffeemaker lid
• Remove the coffee lter basket
• Replace the coffee lter basket back into the water tank making sure it is securely in position
• Replace the coffeemaker lid and restart the brew cycle
Blue Coffee Release Indicator Light
Coffee Release Lever
a. Lock Position – Lever must be in this position to begin
the brew cycle.
b. Release Position – Slide lever to this position when the
brew cycle has ended and coffee is ready to be released into carafe.
Control Panel
BEFORE FIRST USE
Before using your Cuisinart® Automatic Cold Brew Coffeemaker for the rst time:
BE SURE TO REMOVE POLYBAGS FROM CARAFE AND COFFEEMAKER.
PLACE CARAFE BACK ONTO BASE.
During the manufacturing process, dust can get trapped in the coffeemaker. We recommend rinsing all removable parts before rst use. For detailed instructions, see Cleaning and Maintenance section in instruction booklet.
HELPFUL HINTS
• Always keep Coffee Release Lever in the LOCK position when coffeemaker is not in use.
• Use a dark roast, medium-to-coarse grind for optimal avor.
• For best results, use ltered cold water to ll the water tank.
Recommended Recipe
Ground Coffee Total Water Brewed Cups
5½ level scoops 15 oz./470ml 3
9 level scoops 25 oz./790ml 5
13 level scoops 35 oz./1100ml 7
Lift off the coffeemaker lid to access
1.
the coffee lter basket. Carefully remove pop-off lid from basket and use measuring scoop to add ground coffee. See Recommended Recipe. Replace pop-off basket lid. NOTE: The coffee lter basket can also be removed to ll. See instruction booklet, page 7.
Before filling the water tank, make
2.
sure Release Lever is in the LOCK position to prevent water from flowing out. Pour cold water (NEVER FILL WITH
HOT WATER) into the tank. Since the coffee lter basket is in the water tank, use WITH COFFEE BASKET indicators on back of the tank to add amount desired. Replace the coffeemaker lid.
Insert carafe lter and lid into
3.
carafe and place on the base. Plug into an electrical outlet. If coffeemaker remains untouched for 30 minutes, it enters standby mode – all lights will be off. Press any button to wake unit up.
The default strength setting is
4.
Medium. Press Mild or Bold button to change selection. The LED on selected button will illuminate.
NOTE: Brew times vary based on selected strength.
Mild = 25 minutes • Medium = 35 minutes • Bold = 45 minutes
Mild = 25 minutes • Medium = 35 minutes • Bold = 45 minutes
Press the Brew button to begin
5.
brewing. The brew LED will illuminate. The coffee lter basket will gently spin and pause throughout brew cycle. When the brew cycle is completed, 3 beeps will sound and the brew and strength setting LEDs will ash.
Slide the coffee release lever to the
6.
RELEASE position. The blue coffee release indicator light will illuminate, coffee will stream into carafe, and the coffee lter basket will go through a nal spin cycle. When the release cycle is nished, 5 beeps will sound.
Slide the Release lever back to
7.
LOCK position and your Cuisinart Cold Brew coffee is ready to serve!
®
Loading...