CUB ELECPARTS VS60U029 User Manual
0
Brand Name : Cub
Model Name : VS60U029
Product Name : Sensor AID DUO TPMS
TOOL
CUB SENSOR AID DUO TPMS
TOOL
For VS-60U024 / VS-60U029 Series
1
Table
2
3
4
5
14
14
17
20
20
21
Specification
Part list
1. Sensor AID DUO TPMS TOOL Introduction……………………….
1.1 Appearance
1.2 Keypad Summary
2. Function……………………………………………………………….......….
2.1 MAKER SELECTION
2.1.1 DIAGNOSE
2.1.2 PROGRAMMING
2.1.3 CHECK UNI-SENSOR
2.1.4 RELEARN INFO
2.1.5 OBD II OPTIONS
2.1.6 TREAD DEPTH
2.2 LAST VEHICLE
of contents
2.3 SETTINGS
2.4 UPDATE
2.5 SAVED VEHICLES
2.6 TOOL INFORMATION
3. Warranty………………………………………………………………………
2
Specification:
Item
Specification
Operating Frequency
125kHz,2.4Ghz
Power Input / Current
5V/2A
Operating Current
380 mA(Max 600 mA)
Operating Temperature
0 ~ 40 ℃ (32 - 104℉)
Storage temperature
-20 ~ 60 ℃ (-4 - 140℉)
Operating Humidity
20-90%
Storage Humidity
20-90%
Size(rubber)
210*102*62mm
Weight
630g 5% ( 60U029 series)
610g 5% ( 60U024 series)
NO
Item
Q’ty
1
Sensor Aid TOOL
1
2
OBD II cable
1
3
Charger ( 5V/2A)
1
4
Mirco usb cable
1
5
Magnet
1
6
User manual
1
7
BT OBD II
1
Part List
3
1. Sensor AID DUO TPMS TOOL
Power
On / Off
Navigate through measured
and parameters by pressing
keys
Introduction
Sensor AID DUO TPMS TOOL, henceforth called Sensor AID DUO, is
promote CUB Uni-Sensor in the whole world. Sensor AID DUO TOOL can diagnose
and interact with tire pressure sensor through wireless (radio frequency)
communication to:
• Retrieve data from tire pressure sensor
• Verify the identity of each tire pressure sensor mounted on the wheels.
• Assist technicians in servicing CUB Uni-Sensor during relearn procedures.
NOTE: Sensor shall be diagnosed close to left or right antenna.
1.1
Appearance
1.2 Keypad Summary
designed
to
4
OK key, press it to
validate or process
function.
The Micro-USB connection
For charging (5V/2A) /
IDtoPC / updating
Indicator will turn red
when battery is low
Indicator will turn orange
when charging
Esc key, press it to return
to the previous menu
without parameter
validation
Press and hold the power key for 3 seconds to power on the device
During power on, The
device display the CUB
logo
Now the device is at the
MAIN MENU
RJ11 cable.
Function pending
Home key, Back to main
menu
Tread Depth mechanism.
This function is for the
60U029 series.
LED for Camera
AF Camera
2
. Function
5
MAKER selection:
Use the arrow key
to browse automakers,
press the “OK” key to
select
MODEL selection:
Use the arrow key
to browse model, press
the “OK” key to select.
YEAR selection:
Use the arrow key
to browse model, press
the “OK” key to select.
MAIN MENU:
Use the arrow key
to browse function, press
the “OK” key to select
FUNCTION selection.
Press the “OK” key to
select DIAGNOSE
function.
Press “OK” key to enter.
2.1 MAKER SELECTION
Arrow Key : Use arrow keys to browse
NOTE: Definition
OK key : Select / Validate / Process
2.1.1 DIAGNOSE
2.1.1.1
Diagnose SINGLE SENSOR
6
Use the arrow key to select
diagnose “SINGLE
SENSOR” or “MULTIPLE
SENSORS” and press the
“OK” key to select.
Press “OK” key to
diagnose.
Use the arrow key
to browse MULTIPLE
SENSORS, press the
“OK” key to select.
After retrieving data from
sensor, the indicator light
will automatically move to
next wheel. Press “OK”
key to diagnose. Use the
same procedure for the
other wheels.
Sensor AID will now activate
the sensor. Sensor response
time may vary depending on
sensor type and brand. Sensor
AID will sound after receiving
sensor information.
The picture above is an
example of sensor data
communication result
NOTE The Sensor AID will identify the sensor
Not
all
sensors transmit every
2.1.1.2
Diagnose MULTIPLE SENSORS
information
piece of information
that is
shown.
transmitted.
The
picture
below is an
example
of sensor data
communication result
DIAGNOSE: To diagnose sensor information.
PROGRAMMING : a shortcut to the Programming menu. (See page 6).
7
Press “OK” key to
program.
Use the arrow key
to browse WIRELESS (as
example). Press “OK” key
to program.
Select New Sensor.
Press “OK” key to enter.
See step 2.1.1, then use
arrow key to browse.
Press “OK” key to enter.
TREAD DEPTH: To process TREAD DEPTH function (See page xxx).
SAVE: To save the existing data to SAVED VEHICLES menu (will be enabled when
there is existing data, see page XX).
2.1.2 PROGRAMMING
2.1.2.1
NEW SENSOR
HINT:
IN CRADLE: Indicates programming by wire (Uni-Sensor must be placed inside cradle).
WIRELESS: Indicates programming by wireless (Wireless Uni-Sensor must be within
programming range from the tool)
NOTE: Make sure there are no other Wireless Uni-Sensors within 1 m from the tool when you
use wireless programming ; otherwise, the programming will fail.
Program blank sensor. When selected and pressing the “OK” key, it will
automatically program the next Uni-Sensor in the same way (in cradle/wireless) as previously
selected.
Uni-Sensors.
DEL ALL: Delete all the existing data of all the previously programmed
Loading...