Cub Cadet CC924, CC927D, CC927U Operator's Manual

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting

·

· · · ·

PERATOR’S

O

ANUAL

M

Brushcutter

CC924/CC927D/CC927U

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

FORM NO. 769-11081 02
01/25/2018

Safety Instructions..........................................3

Symbols...........................................................5

Get to know yur brush cutter.........................7

Maintenace and repair................................. 14

Cleaning and Storage..................................17

Tro

ubleshooting...........................................18

Assembly Instructions....................................9

Fuel and Oil Instructions..............................11

Contents ....................................................... 20

Operating Instructions.................................12

Before setting up and operating your new equipment,
please locate the model plate on the equipment and record
the information in the provided area to the right. You can
locate the model plate on the engine of the brushcutter
This information will be necessary, should you seek technical
support via our web site, Customer Support Department,
or with a local authorized service dealer.

Visit us on the web at www.mtdproducts.com

Contact MTD AU • P.O. Box 376 Dandenong.Vic.3175
Email Address: [e-mail] Customer Service Phone:[phone]

19

2

18. The rotary spool head and/or the cutting blade may keep running for a short time just after
your shutting it down. Always be aware of the rotating parts; they are dangerous. If the
cutting attachments cannot stop at idling, you should adjust the carburetor.

19. Never use parts, accessories or attachments which are not authorized for this unit. Otherwise,
the user may be seriously injured and/or the unit damaged and the warranty may be deemed
null and void.

20. If situations occur which are not covered in this manual, please contact MTD customer service
department or your nearest local dealer.

4

SYMBOLS

SAFETY AND WARNING SYMBOL

Indicates danger,warning or a reason to be cautious.Can be used together with
other symbols or pictograms.

READ OPERATING MANUAL

Non-compliance with the operating instructions and precautions may result in
serious injuries.Read the operating manual before starting or operating the unit.

WEAR EYE AND EAR PROTECTION

CAUTION: Ejected objects may cause serious eye injuries and excess noise may
cause loss of hearing.When operating the unit,wear eye and ear protection.

KEEP BYSTANDERS AW AY

CAUTION: All bystanders,especially children and pets,must be kept at

least 15m from the working area.

PETROL

Always use clean and fresh lead-free petrol for mixing petrol.

OIL

Use only authorised oil according to the operating manual for mixing petrol.

EJECTED OBJECTS AND ROTATI NG PARTS M AY CAUSE SERIOUS INJURIES

CAUTION: Do not use the unit if the protective housing has not been correctly
positioned for cutting.Keep away from the rotating line coil.

Keep hands and feet away from rotating parts.

5

IGNITION SWITCH

RUN

IGNITION SWITCH

OFF/STOP

BEWARE OF HOT SURFACES

SHARP BLADE

CAUTION

9000

MAXIMUM RPM

GLOVES

Please wear sturdy gloves.

SHOES

Please wear afety shoes.