Cub Cadet 2200H User Manual

Operator’s Manual

High Pressure Washer

Model 2200H

IMPORTANT:

READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

CUB CADET P.O. BOX 368023 CLEVELAND, OHIO 44136-9722 [ www.cubcadet.com ]

FORM NO. 770-10449

(9/00)

CONTENTS

Overview ......................................................................3

Safe Operation Practices .............................................3

Assembly Instructions ..................................................5

Operating Instructions .................................................6

Using the Accessories .................................................7

Working with Detergents .............................................8

Shut Down and Clean-Up ............................................9

Taking a Break ............................................................9

Winterizing and Long-Term Storage ............................9

Cleaning Tips ...............................................................10

Optional Cleaning Accessories ....................................11

Troubleshooting ...........................................................12

Warranty ......................................................................16

2

MODEL 2200H OVERVIEW

Specifications

Engine
Water volume
Operating pressure

Item Description

Water inlet

1.
Detergent tray w/ screw

2.
Knob Assembly (two)

3.
Oil fill cap

4.
High pressure hose

5.
Detergent suction tube

6.
w/ filter
Handle

7.
Accessory rack

8.
Trigger gun safety lock

9.
Trigger gun

10.
Pull start

11.
Gas tank

12.
Throttle

13.
Choke

14.
Wand w/adjustable

15.
spray nozzle

16.

High pressure outlet
(not pictured)

6.0 HP Briggs & Stratton Quantum

2.0 GPM
2200 PSI

15

14

13

16

10

12

11

9

7

8

5

6

4

3

2

1

SAFE OPERATION PRACTICES — NEVER!

Never point nozzle at people or animals.

Never drink alcohol or use drugs while operating this equipment.

Never spray electrical connections, electrical outlets or fixtures.

Never add fuel with the engine running or operate where fuel has been spilled.

Never touch hot surfaces or allow accessories to contact hot surfaces.

Never operate in an enclosed space, exhaust fumes are dangerous.

Never operate near utilities with open flames.

Never operate without the water turned on and never use hot water.

3

SAFE OPERATION PRACTICES – Read First!

Safety Warnings

When using this product basic precautions
should always be followed:

• Read all the instructions before using the
product.

• FIRE HAZARD! Do not add fuel with the
engine running. Do not operate if fuel
has been spilled. Instead move the
machine to a different location and avoid
creating sparks.

• Operate and fuel machine in a well
ventilated area, free of devices featuring
an open pilot or flame such as boilers,
water heaters, etc.

• High pressure jets can be dangerous if
subject to misuse. The jet must not be
directed at persons, animals, electrical
devices or the machine itself.

• Wear safety goggles.

• Do not use acids, solvents, or any other
flammable material in this product.
These products can cause physical
injuries to the operator and irreversible
damage to the machine. If you have
further questions regarding the use of
recommended cleaning detergent,
please call your Cub Cadet dealer.

• The machine has hot surfaces which can
cause burns. Operate the unit in a safe
environment and away from children.

• Do not allow the high pressure hose to
come into contact with the muffler guard.

• Do not leave the machine running
unattended.

• Learn how to stop the machine and
release pressure quickly. Be thoroughly
familiar with the controls.

• Stay alert — watch what you are doing.

• Do not operate the product when
fatigued or under the influence of alcohol
or drugs.

• Do not stand on unstable surfaces.
Stand with both feet balanced at all
times.

• The Gun Safety Lock PREVENTS the
trigger from accidentally being engaged.
This safety feature DOES NOT lock the
trigger in the on position.

Water Supply
(Cold Water Only)

• Water hose must be at least 3/4 inch in
diameter.

• Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).

• Flow rate can be determined by running
the water for one minute into an empty
5-gallon container.

• The water supply temperature must not
exceed 104°F/40°C.

• Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.

• Always prevent debris from being drawn
into the unit by using a clean water
source.

We strongly recommend that this high
pressure washer not be left running for
periods of 5 minutes or longer without
the trigger gun being engaged.

This high pressure washer is equipped
with thermal protection to extend the
life of your pressure washer. The
thermal protector will automatically
activate at a predetermined
temperature ejecting hot water before
resetting. This ensures that the pump
does not become damaged.

Caution

• Follow the maintenance instructions

specified in the manual.

• This machine has been designed

for use with cleaning detergent
supplied or recommended by the
manufacturer. The use of other
cleaning detergents may affect the
operation of the machine and void
the warranty.

4

ASSEMBLY INSTRUCTIONS

Step1

accessory rack.

Slide the handle through the

Step2 Align the holes of the accessory

rack to the handle and fasten the four
screws.

Step4 Insert the spray wand into the

gun. Push in and turn clockwise to lock
spray wand in place. Turn the wand collar
clockwise onto the spray wand threads
until tight.

Step3 Insert the handle into the frame.

Align holes, insert bolt, and tighten with
knob.

Step5 Attach high pressure hose to

trigger gun.

5