CTEK battery charger, 1075 User Manual

EN

EN • 3

MODE

RECONDAGM

12V/5A

MXS 5.0

CONGRATULATIONS

to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.

CTEK COMFORT CONNECT – eyelet M6

CTEK COMFORT CONNECT

MAINS CABLE

CTEK COMFORT CONNECT – clamp

CHARGE CABLE

SUPPLY PLUG*

* Supply plugs may differ to suit your wall socket.

SMALL

BATTERY

PROGRAM

ERROR LAMP

NORMAL

BATTERY

PROGRAM

FULLY CHARGEDREADY TO USE

AGM

OPTION

RECOND
OPTION

POWER LAMP

HOW TO CHARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket. The power lamp will indicate that the mains
cable is connected to the wall socket. The error lamp will indicate if the battery clamps
are incorrectly connected. The reverse polarity protection will ensure that the battery or
charger will not be damaged.

3. Press the MODE-button to select charging program.

SMALL BATTERY PROGRAM NORMAL BATTERY PROGRAM

Continue to press the MODE-button to combine charging program with charging options.

AGM OPTION

RECOND OPTION

Press the MODE-button several times until the desired combination of charging program and
options are lit.

4. Follow the 8 -step display through the charging process.
The battery is ready to start the engine when STEP 4 is lit.
The battery is fully charged when STEP 7 is lit.

5. Stop charging at any time by disconnecting the mains cable from the wall socket.

MODE BUTTON

MANUAL

AGM

4 • EN

BATTERY SIZE (Ah)

TIME TO 80% CHARGED

2Ah

2h

8Ah

8h

20Ah

4h

60Ah

12h

110Ah 26h

READY TO USE

The table shows the estimated time for empty batter y to 80% charge.

CHARGING PROGRAMS

Settings are made by pressing the MODE-but ton. After about two seconds the charger acti­vates the selected program. The selected program will be restarted next time the charger
is connected.

The table explains the different Charging Programs:

Program

Battery

Size (Ah)

Explanation Temp range

1. 2–14 Ah

Small battery program

14.4V/0.8A
Use for smaller batteries.

-2 0°C–+5 0°C

(-4ºF–122ºF)

14–16 0Ah

Normal battery program

14.4 V/5A
Use for WE T batteries, Ca/Ca,
MF, GEL batteries and many
AGM batteries.

-2 0°C–+5 0°C

(-4ºF–122ºF)

14–16 0Ah

AGM option

14.7 V/5A
Use for charging most AGM batt ­eries like Optima and Odyssey.

-2 0°C–+5 0°C

(-4ºF–122ºF)

RECOND

14–16 0Ah

Recond option 15.8V/1.5A
Use to return energy to the empty
WET and Ca/Ca batteries.
Recond your battery once per
year and after deep discharge to
maximise lifetime and capacity.
The Recond program adds
STEP 6 to the normal battery

program.

-2 0°C–+5 0°C

(-4ºF–122ºF)

ERROR LAMP

If the error lamp is lit, check the following:

1. Is the chargers positive lead connected to the battery´s
positive pole?

2. Is the charger connected to a 12V batter y?

3. Has charging been interrupted in STEP 1, 2 or 5?

Restart the charger by pressing the MODE-button. If charging is still
being interrupted, the battery...

STEP 1: ...is seriously sulphated and may need to be replaced.
STEP 2 : ...can not accept charge and may need to be replaced.
STEP 5: ...can not keep charge and may need to be replaced.

AGM

POWER LAMP

If the power lamp is lit with a:

1. STEADY LIGHT

The mains cable is connected to the wall socket.

2. FLASHING LIGHT

The charger has entered the energy save mode. This happens if the
charger isn't connected to a battery in 2 minutes.