CRU DataPort DP25 RAID Dock 3R User Manual
Product Models DataPort DP25 RAID Dock 3JR
Interface Types & Speeds USB 3.0: up to 5 Gbps
Drive Types Supported 2.5-inch SATA rotational hard drives, 2.5-inch SATA SSD hard drives*
Supported DataPort 25
Carriers and Frames
DataPort 25 Hand-Held RAID*, DataPort DP25-3SJR, DataPort DP25 RAID Car-
rier, DataPort 25 SATA 6G
Data Connectors One (1) USB 3 Type B connector
Supported Operating Windows 8.1, 8, 7, and Vista
Windows Server 2012, 2008, and 2003 product families
Mac OS X 10.4.x or higher
Linux distributions that support the connection type used
Torque 2.5-inch hard drives, M3 screws: 4 inch-pounds max.
Compliance EMI Standard: FCC Part 15 Class B, CE
EMC Standard: EN55022, EN55024
Product Weight 1.9 pounds (0.862 kg)
Product Dimensions 6.34” x 4.37” x 1.38” (161mm x 102mm x 26mm)
Technical Support Your investment in CRU products is backed up by our free technical support for
the lifetime of the product. Contact us through our website, cru-inc.com/support
or call us at 1-800-260-9800 or +1-360-816-1800.
*See Section 2 for warnings about drive and hardware support.
© 2015 CRU Acquisition Group LLC, ALL RIGHTS RESERVED. DataPort® and CRU® are trademarks of CRU Acquisition Group, LLC
and are protected by trademark law.
Product Warranty
CRU warrants this product to be free of signicant defects in material and workmanship for a period of three years from the original
date of purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but
not limited to, the implied warranties of merchantability and tness for a particular purpose and non-infringement of third-party rights
with respect to the documentation and hardware. No CRU dealer, agent, or employee is authorized to make any modication, exten-
sion, or addition to this warranty. In no event will CRU or its suppliers be liable for any costs of procurement of substitute products
or services, lost prots, loss of information or data, computer malfunction, or any other special, indirect, consequential, or incidental
damages arising in any way out of the sale of, use of, or inability to use any CRU product or service, even if CRU has been advised of
the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products at issue. CRU reserves
the right to make modications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a home
or commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
Protecting Your Digital Assets
TM
CRU® DataPort® DP25 RAID Dock 3JR
Quick Start Guide
Features
• Access your data anywhere via USB 3.0
• RAID Modes: No RAID (requires port-multiplication support), RAID 0, RAID 1, Span.
• RAID conguration switches on the carrier make this model ideal for those who
want the exibility of using multiple types of RAID sets in the same enclosure
• Supports 5 Gbps transfer speeds
Part Number: A5-025-0020-3 Rev. 1.3
FOR HOME OR OFFICE USE
CRU DataPort DP25 RAID Dock 3JR Quick Start Guide
CRU Mark
2
CRU DataPort DP25 RAID Dock 3JR Quick Start Guide
3
1 USAGE WARNINGS
• Do not use this product to transport data from previously formatted RAID drive pairs
used in other DP25 models or data loss may result! All drives must be initially unfor-
matted before rst use.
• The single-drive DataPort 25 USB 3.0 Carrier (8531-4009-9500) does not support SSD
drives when used inside the DataPort DP25 RAID Dock 3JR frame.
• The DataPort 25 Hand-Held RAID (with USB 2.0 and SATA) was the previous generation
of this product. If the previous DataPort 25 Hand-Held RAID carrier (8511-5170-9500) is
used with the newer DataPort DP25 RAID Dock 3JR (8570-6370-9500), or the newer
DataPort DP25 RAID Carrier (8511-6309-9500) is used with the older DataPort 25 Hand-
Held RAID frame (8512-3202-9500), the DIP Switch settings on the back of the carrier
will be overridden by the DIP Switch settings on the back of the frame/dock. You must
take into account this behavior or data loss may result!
2 INSTALLATION STEPS
2.1 CONFIGURING RAID SETTINGS
The DataPort DP25 RAID Dock 3JR operates in four different congurations, which are deter-
mined by DIP switch “SW1” on the rear of the frame. Set the DIP switch to the desired con-
guration. The frame is set to “No RAID” by default.
“SW1” DIP Switch Settings
POSITION 1 POSITION 2 POSITION 3
No RAID*
Span
RAID 1
RAID 0
*Requires that a port-multiplier-aware host SATA port be used during frame installation
Off Off On
On Off On
Off On On
On On On
and turn it 90 degrees counterclockwise to release the lock so that you can eject the car-
rier.
b. Slide the cover of the carrier back and off.
c. Remove the screw kit from the carrier.
d. Insert a 2.5” SATA hard drive, with the top label facing up, into the bottom unied power
and data connector inside the carrier.
e. Secure the hard drive to the carrier using mounting screws from the provided screw kit.
f. Insert the second 2.5” SATA hard drive, again with the top label facing up, into the top
unied power and data connector.
g. Secure the hard drive to the carrier using the provided mounting screws.
h. Replace the cover and secure it by inserting two screws from the provided screw kit into
the rear of the carrier.
2.3 OPERATING YOUR DATAPORT DP25 RAID DOCK 3JR UNIT
a. Connect the DataPort DP25 RAID Dock 3JR AC adapter into a power source and the other
end to the rear of the dock.
b. Attach the provided USB 3 cable to the rear of the dock and the other end to an open USB
3 port on your computer.
c. Slide the carrier into the dock.
d. Insert the provided DataPort key into the keylock on the front of the dock and turn it 90
degrees clockwise to secure the carrier into the dock and power it on.
When any RAID set or hard drives are rst used with the DataPort DP25 RAID Dock 3JR, they
will show up as blank, unallocated volumes and you’ll need to format each one before you
can use them.
NOTE
Each time you change the DIP switch settings, you must cycle power on the unit in
order for the settings to take effect.
2.2 HARD DRIVE INSTALLATION
a. Press the Eject button on the front of the DataPort DP25 RAID Dock 3JR to release the
button, and again to eject the carrier (may be sold separately). If the lock is engaged and
the eject button will not release the carrier, insert the provided DataPort Key into the dock
Protecting Your Digital Assets
TM
Loading...